• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.477-484
• /
• 2003

Recently, sliding mode control(SMC) method has been investigated for control of building structures under earthquake loadings. SMC keeps responses of a structure in sliding surface while the structure is stable. This control method uses both linear controller and nonlinear controller such as bang-bang controller. This paper presents vibration control of a structure using saturated sliding mode controller, whose maximum conrtol force is limited. The effectiveness of SMC method with controler saturation is investigated based on two performance evaluation criteria: root mean square(RMS) and maximum values of floor drifts and accelerations. Simulation results indicate that SMC method is effective in reduction of displacement and acceleration utilizing the saturated controller's capacity efficiently.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.188-191
• /
• 2016

We investigated surface-roughness-dependent optical loss in a plasmonic cavity consisting of a semiconductor nanodisk/silver nanopan structure. Numerical simulations show that the quality factors of plasmonic resonant modes significantly depend on the surface roughness of the dielectric-metal interface in the cavity structure. In the transverse-magnetic-like whispering-gallery plasmonic mode excited in a structure with disk diameter of 1000 nm, the total quality factor decreased from 260 to 130 with increasing root-mean-square (rms) surface roughness from 0 to 5 nm. This quantitative theoretical study shows that the smooth metal surface plays a critical role in high-performance plasmonic devices.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.852-853
• /
• 2008

This paper proposes an optimal design method for the shape optimization of the permanent magnets (PM) of an in-wheel permanent magnet synchronous motor (PMSM) to reduce the cogging torque considering a total harmonic distortion (THD) and a root mean square (RMS) value of back-EMF. In this method, the Kriging model based on a design of experiment (DOE) is applied to interpolate the objective function in the spaces of design parameters. The optimal design method for the PM of an in-wheel PMSM has to consider multi-variable and multi-objective functions. The developed design method is applied to the optimization for the PM of an in-wheel PMSM.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.131-133
• /
• 2014

Vibration exposure of the KTX and ITX-saemaeulho on the Gyung-Bu line was evaluated and compared in terms of human health based on ISO 2631. RMS value of KTX was calculated as much lower than ITX-saemaeulho in all travel sections. When VDV result of the two trains drived return travel from Seoul to Busan in single day is compared on the health guidance caution zone of ISO 2631, vibration exposure of KTX is safer than ITX-saemaeulho which is marginally under the caution line.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.05a
• /
• pp.249-252
• /
• 2009

본 연구는 화면전환 및 필기 등의 프레젠테이션을 편리하게 제어 할 수 있는 시스템을 구현하고자 한다. 카메라를 이용한 컴퓨터 비전 분야에서 주변의 조명 환경의 영향을 적게 받는 적외선을 이용한 연구가 활발하게 진행되고 있다. 제안하는 방법에서는 USB(Universal Serial Bus) 타입의 카메라를 적외선 환경에 맞게 개조하고, 이를 이용하여 적외선 LED(Light Emitting Diode)를 이용한 전자 분필 영상을 취득하여, 실시간으로 전자 분필의 위치를 검출한다. 검출된 영역은 사전에 사용자가 설정한 '필기 가능 영역'과 변형 함수에 기반하여, 실제 모니터 좌표로 사상되어 화면에 표시되게 된다. 제안하는 시스템은 저렴한 가격의 웹 캠과 적외선 조명 이외에는 별도의 장비가 필요하지 않으면서도, 대형 스크린을 터치 방식으로 활용할 수 있다는 장점을 가진다. 실험 결과, 계산된 모니터 좌표와 사용자가 의도한 위치간의 평균 RMS(Root Mean Square) 오차는 약 15픽셀로 나타나서, 글씨를 필기하고 화면의 특정 부분을 강조하기 위한 활용이 가능함을 확인할 수 있었다.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.72-74
• /
• 2003

We fabricated textured Ag substrates for coated conductor and evaluated the effects of annealing temperature on microstructural evolution, texture formation, and surface morphology. A strong {110}〈110〉 textured Ag substrate was obtained by cold rolling and annealing at 80$0^{\circ}C$: the full-width at half-maximum(FWHM) value of {110}〈110〉 poles was as sharp as 10$^{\circ}$. Surface morphology was evaluated by using Atomic force microscopy(AFM). Root-mean-square(RMS) roughness of the substrate annealed at 80$0^{\circ}C$ was 39.2 nm. The substrate of strong texture and smooth surface, fabricated in our study, is considered to be suitable for use as a substrate for deposition of superconductor films.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.71-72
• /
• 2000

The design of large area thin film transistor liquid crystal displays (TFT-LCDs) requires consideration of cross-talks between the data lines and pixel electrodes. These limits are imposed by the mutual coupling capacitances present in a pixel. The mutual coupling capacitance causes a pixel voltage error. In this study, semi-empirical model, which is adopted from VLSI interconnection capacitance calculations, is used to calculate mutual coupling capacitances. With calculated mutual coupling capacitances and arbitrary given image pattern, the root mean square (RMS) voltage of pixel is calculated to see vertical cross-talk from the first to the last column. The information obtained this study can be utilized to design the larger area and finer image quality panel.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.975-978
• /
• 1997

This Paper presents a high impedance fault (HIF) detection algorithm of distribution systems using wavelet transform. Two HIFs on dry soil and sandy soil were simulated on various load conditions in 22.9 kV distribution systems using EMTP, and the current wavelets were decomposed by wavelet transform. The current root mean square(rms) change, the index change rate and the relative amplitude change were used as the multi-criteria for a HIF detection. The index change rate and the relative amplitude were made using the wavelet coefficients.

• Structural Engineering and Mechanics
• /
• v.3 no.5
• /
• pp.497-509
• /
• 1995

Effectiveness of multiple tuned mass dampers (MTMD) in suppressing the dynamic response of base excited structure for first mode vibration is investigated. The effectiveness of the MTMD is expressed by the ratio of the root mean square (RMS) displacement of the structure with MTMD to corresponding displacement without MTMD. The frequency content of base excitation is modelled as a broad-band stationary random process. The MTMD's with uniformly distributed natural frequencies are considered for this purpose. A parametric study is conducted to investigate the fundamental characteristics of the MTMD's and the effect of important parameters on the effectiveness of the MTMD's. The parameters include: the fundamental characteristics of the MTMD system such as damping, mass ratio, total number of MTMD, tuning frequency ratio, frequency spacing of the dampers and frequency content of the base excitation. It has been shown that MTMD can be more effective and more robust than a single TMD with equal mass and damping ratio.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.4
• /
• pp.127-137
• /
• 2009

This paper is proposed that in-output Digital module is acquired a vibration signal of a rotating machinery by Data Acquisition System. The module is designed to get ride of nose through low pass filter on the vibration signal from sensors and set the gain value for being able to sampling AC to DC, and also the sampled data by sampler and the conversed data by DIP/FPGA is supplied to the analyzer for analysis at a software tool. The DIP(Digital Signal Processor) of the Digital input/output Board makes Average voltage, Peak to Peak voltage, RMS(Root Mean Square) and Gap voltage, also FFT(Fast Fourier Transform) for rotating vibration diagnosis.