• Restorative Dentistry and Endodontics
• /
• 제34권4호
• /
• pp.371-376
• /
• 2009

이 연구에서는 Mineral Trioxide Aggregate (MTA)와 4-methacryloxyethyl trimellitate anhydride (4-META) / methyl methacrylate (MMA) & tri-n-butylborane (TBB) 레진을 혼합하여 치근단 역충전 재료로 사용하였을 때의 미세누출을 MTA, 포틀랜드 시멘트와 비교하였다. 발치된 사람 치아의 근관형성 및 충전 후 치근단 절제와 역충전 와동을 형성하였다. MTA, Portland cement, MTA와 4-META/MMA & TBB레진을 혼합한 각각의 재료로 치근단을 역충전한 후 methylene blue dye에 72시간 동안 침적하여 염료가 침투한 길이를 10배 현미경 하에서 측정하였다. MTA와 4-META/MMA & TBB 레진 혼합 충전 군에서는 포틀랜드 시멘트나 MTA 충전군보다 통계적으로 유의하게 적은 미세 누출을 보였으며, 포틀랜드 시멘트와 MTA 충전군의 미세 누출 정도는 통계적으로 차이가 없었다. 이 실험의 결과로 보아 MTA와 4-META/MMA & TBB레진 혼합 재료는 치근단 역충전시 포틀랜드 시멘트나 MTA에 비해 낮은 초기 미세누출을 보여, 치근단 봉쇄 효과가 우수한 것으로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제36권5호
• /
• pp.385-396
• /
• 2011

연구목적: 본 연구는 치근벽의 전처리 개념과 접착제의 중합방법이 레진계 근관충전제의 치근단 밀폐능에 미치는 영향을 평가하였다. 연구 재료 및 방법: 3가지 다른 접착변수를 조합하여 충전한 Resilon-RealSeal 시스템의 근단미세누출을 색소침투법을 이용하여 통상의 가타퍼쳐 충전과 비교하였다. 실험군은 자가부식형 RealSeal primer와 이중중합형 RealSeal sealer를 이용하여 Resilon 충전한 SEDC군, 산부식없이 Scotchbond Multi-Purpose primer를 적용한 후 접착제는 광중합하고 Resilon을 충전한 NELC군, 및 Scotchbond Multi-Purpose의 접착강화제와 접착제를 total etch/wet bonding과 광중합의 술식을 정확하게 지켜서 Resilon을 충전한 TELC군으로 구분하였다. 대조군(GPCS)에서는 통상의 AH26 plus sealer를 사용하여 가타퍼쳐를 충전 하였다. 결과: 치아장축방향의 색소침투는 TELC군에서 GPCS군과 SEDC군에 비해 유의하게 작았다(Kruskal-Wallis test, p < 0.05). 횡단면의 미세누출 점수도 TELC군이 근첨으로부터 2 - 5 mm의 범위에서 다른 군에 비해 유의하게 낮았다(Kruskal-Wallis test, p < 0.05). 결론: 레진계 근관충전제를 사용 시에는, 자가부식형 전처리제와 이중중합형 sealer보다는, total etch/wet bonding 개념과 적절한 광중합을 도모하는 전처리제 및 접착제의 사용이 치근단 미세누출을 감소시키므로 추천된다.

• Journal of Oral Medicine and Pain
• /
• 제6권1호
• /
• pp.15-18
• /
• 1981

The author had selected the roots and root-canal as measurable parts and sought the area ratio by measuring the respective areas of the root. Further, heplotted out a root caual index and studied the correlation with age. The teeth used as reserch material were permanent maxillary central incisors of Korean female. Some 296 teeth of known age were selected on condition that there is no caries or filling material and that they were not malformed in showing normal signs in roentgenograms. The $3" {\times} 4"$ printing paper so as to measure easily. On the ocassion of measureing the area of measured parts with a planimeter (Koizumi, type kp-27, Japan), the cervical lines were joined up into a straight line on a photograph (Figure 1) Root canal index = Area of the root / Area of the root canal The results of the root canal index in Korean female age groups were as follows : 1. The root canal index of maxilary central incisor in women was 4.74 im 20 years of age, 5.44 in 30, 5.90 in 40, 6.32 in 50, 6.63 in 60 in the order. 2. Root canal index and age were in positive correlation ; there was a tendency that the root canal index increase as age advances. 3. The regression equation was as follows : Y = 5.36x + 7.71 (r = 0.54, n= 296 ) (Y = estimated age, x = root canal index)

• 대한치과의사협회지
• /
• 제50권9호
• /
• pp.574-585
• /
• 2012

Purpose : This study was performed to evaluate the healing response around the root perforation restorative material. Materials and Methods : Four beagle dogs were used for experimental study. Endodontic treatment was performed at four maxillary premolars and artificial perforation was formed at furcation area of pulp chamber. Canal was filled with gutta percha cone and the perforation was sealed with MTA at group 1. At group 2, canal was filled and the perforation was sealed with dentin paste. Tooth paste was fabricated using extracted human teeth. Histologic examination of furcation area was performed 2, 4, 8 and 12 weeks after experiment. Results : New trabecular bone formation was observed around the MTA and tooth paste. Lamellar bone was observed as time is over. There were no inflammatory reaction in both groups. Conclusion : There is a possibility which endodontic filling material can be developed using extracted teeth.

• Journal of Korean Dental Science
• /
• 제5권2호
• /
• pp.60-67
• /
• 2012

Purpose: To test the apical leakage prevention performance of three different materials through protein leakage procedures using bovine serum albumin (BSA) and Bradford protein reagent. Materials and Methods: A total of 60 human single-rooted teeth were divided into 4 groups, and conventional root canal filling was done. The root was cut 3 mm from the apex, and a cavity was formed. Proroot MTA (MTA), Fuji II LC (GI), Fuji II LC with XP bond (GIA), and Caviton (CA) were used as experimental materials to fill the cavity in a retrograde filling manner. The extent of BSA leakage was then measured with a ultraviolet visible spectrophotometer 24, 48, and 72 hours after filling. Result: After 24 hours, among the 15 teeth of each group, 2 in MTA, 4 in GI, 3 in GIA, and 7 in CA showed leakage. After 48 hours, 3 in MTA, 5 in GI, 5 in GIA, and 10 in CA had leakage and discoloration. After 72 hours, among the 15 teeth of each group, 3 in MTA, 6 in GI, 5 in GIA, and 10 in CA showed leakage. The leakage in the CA group was greater than that in the MTA group at 48 and 72 hours based on Fisher's exact test (P=0.025), and the difference was statistically significant. Similarly, the leakage in the CA group was greater than that in the MTA group over time based on the Kaplan-Meier survival estimate (P=0.011), and the difference was statistically significant. Conclusion: Glass ionomer, glass ionomer after adhesive application, and MTA all showed leakage. Caviton showed greater leakage compared to MTA 48 and 72 hours after filling, and the difference was statistically significant; thus suggesting that Caviton is not appropriate as retrograde filling material considering its sealing ability.

• Restorative Dentistry and Endodontics
• /
• 제45권1호
• /
• pp.5.1-5.8
• /
• 2020

Objectives: The obturation quality of MTA, Biodentine, Total Fill BC root canal sealer (RCS), and warm gutta-percha (WGP) in teeth with simulated internal root resorption (IRR) was evaluated by using micro-computed tomography. Materials and Methods: Standardized IRR cavities were created using 40 extracted maxillary central incisor teeth and randomly assigned into 4 groups (n = 10). IRR cavities were filled with MTA, Biodentine, Total Fill BC RCS (bulk-fill form) and WGP + Total Fill BC RCS. Percentage of voids between resorptive cavity walls and obturation material (external void), and inside the filling materials (internal voids) were measured. Results: Total Fill BC sealer in the bulk-fill form presented significantly highest values of external and internal void percentages (p < 0.05). Biodentine showed a significantly lowest external void percentage (p < 0.05). WGP + Total Fill BC RCS presented significantly lower values of internal void percentages than all groups (p < 0.05), except Biodentine (p > 0.05). Conclusion: None of the filling materials were created void-free obturation in resorption cavities. Biodentine may favor its application in teeth with IRR over Angelus MTA and bulkfill form of Total Fill BC.

• Imaging Science in Dentistry
• /
• 제47권3호
• /
• pp.189-197
• /
• 2017

Purpose: To quantify artifacts from different root filling materials in cone-beam computed tomography (CBCT) images acquired using different exposure parameters. Materials and Methods: Fifteen single-rooted teeth were scanned using 8 different exposure protocols with 3 different filling materials and once without filling material as a control group. Artifact quantification was performed by a trained observer who made measurements in the central axial slice of all acquired images in a fixed region of interest using ImageJ. Hyperdense artifacts, hypodense artifacts, and the remaining tooth area were identified, and the percentages of hyperdense and hypodense artifacts, remaining tooth area, and tooth area affected by the artifacts were calculated. Artifacts were analyzed qualitatively by 2 observers using the following scores: absence (0), moderate presence (1), and high presence (2) for hypodense halos, hypodense lines, and hyperdense lines. Two-way ANOVA and the post-hoc Tukey test were used for quantitative and qualitative artifact analysis. The Dunnet test was also used for qualitative analysis. The significance level was set at P<.05. Results: There were no significant interactions among the exposure parameters in the quantitative or qualitative analysis. Significant differences were observed among the studied filling materials in all quantitative analyses. In the qualitative analyses, all materials differed from the control group in terms of hypodense and hyperdense lines (P<.05). Fiberglass posts did not differ statistically from the control group in terms of hypodense halos(P>.05). Conclusion: Different exposure parameters did not affect the objective or subjective observations of artifacts in CBCT images; however, the filling materials used in endodontic restorations did affect both types of assessments.

• Restorative Dentistry and Endodontics
• /
• 제36권6호
• /
• pp.510-514
• /
• 2011

Mineral trioxide aggregate (MTA)는 치근 천공을 수복하기 위한 생체적합성이 우수한 재료로 소개되었으며 현재 근관 치료의 다양한 분야에서 사용되고 있다. MTA는 전통적인 수복재료와는 달리 수분이 있는 환경에서 경화되는 특징이 있다. 임상에서 흔치는 않지만 경화되지 않은 MTA가 관찰되는 경우가 있으나 이의 원인은 불명확하며 관련된 연구도 많지 않다. 본 증례는 정 방향 MTA 충전 6년 후 MTA가 소실(wash-out)된 환자에 대한 증례로서 그 원인에 대해 고찰해보고자 한다.

• Restorative Dentistry and Endodontics
• /
• 제42권4호
• /
• pp.332-341
• /
• 2017

Objectives: To determine the incidence of crack formation and propagation in apical root dentin after retreatment procedures performed using ProTaper Universal Retreatment (PTR), Mtwo-R, ProTaper Next (PTN), and Twisted File Adaptive (TFA) systems. Materials and Methods: The study consisted of 120 extracted mandibular premolars. One millimeter from the apex of each tooth was ground perpendicular to the long axis of the tooth, and the apical surface was polished. Twenty teeth served as the negative control group. One hundred teeth were prepared, obturated, and then divided into 5 retreatment groups. The retreatment procedures were performed using the following files: PTR, Mtwo-R, PTN, TFA, and hand files. After filling material removal, apical enlargement was done using apical size 0.50 mm ProTaper Universal (PTU), Mtwo, PTN, TFA, and hand files. Digital images of the apical root surfaces were recorded before preparation, after preparation, after obturation, after filling removal, and after apical enlargement using a stereomicroscope. The images were then inspected for the presence of new apical cracks and crack propagation. Data were analyzed with ${\chi}^2$ tests using SPSS 21.0 software. Results: New cracks and crack propagation occurred in all the experimental groups during the retreatment process. Nickel-titanium rotary file systems caused significantly more apical crack formation and propagation than the hand files. The PTU system caused significantly more apical cracks than the other groups after the apical enlargement stage. Conclusions: This study showed that retreatment procedures and apical enlargement after the use of retreatment files can cause crack formation and propagation in apical dentin.

• Restorative Dentistry and Endodontics
• /
• 제39권4호
• /
• pp.282-287
• /
• 2014

Objectives: The aim of the present study was to investigate the bond strength of RelyX Unicem (3M) to root canal dentin when used as an endodontic sealer. Materials and Methods: Samples of 24 single-rooted teeth were prepared with Gates Glidden drills and K3 files. After that, the roots were randomly assigned to three experimental groups (n = 8) according to the filling material, (1) AH Plus (Dentsply De Trey GmbH)/Gutta-Percha cone; (2) Epiphany SE (Pentron)/Resilon cone; (3) RelyX Unicem/Gutta-Percha cone. All roots were filled using a single cone technique associated to vertical condensation. After the filling procedures, each tooth was prepared for a push-out bond strenght test by cutting 1 mm-thick root slices. Loading was performed on a universal testing machine at a speed of 0.5 mm/min. One-way analysis of variance and Tukey test for multiple comparisons were used to compare the results among the experimental groups. Results: Epiphany SE/Resilon showed significantly lower push-out bond strength than both AH Plus/Gutta-Percha and RelyX Unicem/Gutta-Percha (p < 0.05). There was no significant difference in bond strength between AH Plus/Gutta-Percha and RelyX Unicem/Gutta-Percha (p > 0.05). Conclusions: Under the present in vitro conditions, bond strength to root dentin promoted by RelyX Unicem was similar to AH Plus. Epiphany SE/Resilon resulted in lower bond strength values when compared to both materials.