• KIEAE Journal
• /
• 제13권6호
• /
• pp.129-136
• /
• 2013

The rental housing has played a key role to supply a decent living space for the low-income households. The owner of the rental housing should maintain and manage the building physical condition. On the other hand, rents should use the housing without any damage and pay a certain fare for the rent. A rent is classified into two types : private and public. The public rent is mainly to supply a living space for non-available home owner with a low-rent fare. Many of public rent are built and supplied by the public institution or local government. The supplier would take a responsibility to maintain the building and components, reflected by the maintenance plan and repair scope. In this paper, it aimed at providing the repair time in building components of the public rental housing such as lighting, electrical cable, paintings and etc.. The repair time is analyzed with three calculation methods which are solved by the probability and empirical approach. Results are as follows : First, the repair time of the electrical facilities are maintained with 11yr, 10yr and 7 in permanent, public and redevelopment rent respectively. The roof proof has a repair time with 14yr, 11yr and 8 in permanent, public and redevelopment rent housing respectively. Second, Most of the components has a prior length of the repair time in permanent, public and redevelopment rent sequently. There is a difference in repair time according to the rental types. Therefore, it would continue to research the difference in aspect of the living style, building physics, living consciousness and etc.

• 헤리티지:역사와 과학
• /
• 제45권3호
• /
• pp.160-173
• /
• 2012

본 연구는 동대문운동장에서 출토된 조선시대 기와의 선후관계, 유물제작기법 및 기술적 속성을 파악하기 위하여 기와의 물리적 화학적 특성 연구를 실시하였다. 기와의 물리적 특성 연구를 위해 흡수율, 비중, 전암대자율, 시차열분석을 실시하였으며, 화학적 특성 연구를 위해 중성자 방사화분석(NAA), 미세조직관찰, X-선 회절분석(XRD) 등을 실시하였다. 기와편 22점의 중성자방사화분석 및 통계분석결과 각각 기와시료는 다른 시대에 서로 다른 제작지에서 생산된 것으로 뚜렷하게 구분되었다. 또한 희토류원소의 출토지별 평균값을 비교해 보아도 각각 서로 다른 조성의 차이를 보이는데 이는 산지가 다른 점토광물을 이용하여 제작하였다는 것을 의미한다. XRD 및 편광현미경 관찰결과 기와의 주요 성분은 석영과 장석이었으며 부분적으로 운모와 일라이트(Illite)가 나타났다. XRD 분석결과 $1000^{\circ}C$의 부근에서 소성되었을 때 나타나는 뮬라이트(mullite)광물 조성이 나타났으며, 시차열분석에서는 $900^{\circ}C$ 부근에서 완만한 발열피크가 나타났다. 이를 토대로 기와의 소성온도를 추정한 결과, 기와는 $900{\sim}1000^{\circ}C$에서 소성이 이루어진 것으로 보인다. 전암대자율 평균값으로 비교분석하였을 때 출토지별 분류는 나타나지 않았지만 문양이 파상문, 태상문, 어골문, 격자문, 횡선문인 경우 0.2~0.78(${\times}103$ SI unit)의 낮은 전암 대자율이 나타나는 특징이 있다. 전체 흡수율은 대체적으로 14%~21% 범위를 보였으며 이는 조선시대 전통기와에서 나타나는 흡수율 14~18%와 유사한 범위를 보이고 있다. 기와시료의 비중은 대체적으로 1.4~2.5g/cm3의 범위를 보여 출토지에 따른 비중 차이가 나타나지 않았다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.197-202
• /
• 2005

This study started to confirm and prove for the applicability of the dry-process waterproofing system to cover the defects of the wet-process waterproofing system according to weather circumstance, foundation condition and maintenance, etc. This process has triple combined waterproofing system using asphalt sheet, metal sheet, engineering plastic film. It is not influenced by the concrete's crack as the foundation of the roof according to the movement of the building because the waterproofing system is designed for maintaining good quality by absorbing the stress of contraction and expansion that is occurred by the variation of temperature. Ali components used in this process can be recycled environmentally. The superiority of this process proved and reconfirmed through with the investigation of about 130 fields, around 30,000nf for two years.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2006년도 춘계학술발표대회 논문집
• /
• pp.97-98
• /
• 2006

This study proposes a method of generating steel house shop drawing in an automated design method, reducing construction manpower and period. With one hour fire-resistant approval code, reflecting work ability and efficiency, steel-framed house market is expected to extend from one or two story house to multi-purpose facilities up to four story height. More models have been constructed in this system than the first appearance of fire-resistant approval in Korea in 1997 Also, cost estimation of components such as frame walls, roof trusses and floors is obtained with shop drawings. Also, the lack of suppliers of steel framed house shop drawing and unstandardized drawing method get constructors have difficulty in understanding its design. In steel framed house industry, shop drawings are essential part in building and constructing framework and they have major effects on construction deadlines and expenses. By exploring method of shop drawing automation, this study aims to optimize work flow with a standardized drawing method. The proposed system can be applied to manufacturing automation in domestic industry of factory-built panelizing method in the near future.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.53-56
• /
• 2008

A photovoltaic panel is a device that, through the photovoltaic effect, converts luminous energy into electric energy. Photovoltaic generation system used infinity of solar energy, cost of fuel is needless and there in no air pollution or waste occurrence. This paper summarizes the results of these efforts by offering a photovoltaic system structure in 30[kW] large scale applications installed in Mokpo National University dormitory roof. The status of photovoltaic system components, are inter-connection and safety equipment monitoring system will be summarized as this article. This describes configuration of utility interactive photovoltaic system which generated power supply for dormitory. In this paper represent 30[kW] utility photovoltaic system examination result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1126-1127
• /
• 2008

A photovoltaic panel is a device that, through the photovoltaic effect, converts luminous energy into electric energy. Photovoltaic generation system used infinity of solar energy, cost of fuel is needless and there in no air pollution or waste occurrence. This paper summarizes the results of these efforts by offering a photovoltaic system structure in 30[kW] large scale applications installed in Mokpo National University dormitory roof. The status of photovoltaic system components, are inter-connection and safety equipment monitoring system will be summarized as this article. This describes configuration of utility interactive photovoltaic system which generated power supply for dormitory. In this paper represent 30[kW] utility photovoltaic system examination result.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.720-722
• /
• 2005

A photovoltaic panel is a device that, through the photovoltaic effect, converts luminous energy into electric energy. Photovoltaic generation system uses infinity of solar energy, cost of fuel is needless and there is no all pollution or waste occurrence. This paper summarizes the results of these efforts by offering a photovoltaic system structure in 50kW large scale applications installed In Chosun University dormitory roof. The status of PV system components, are inter-connection and safety equipment monitoring system will be summarized as this article. This describes configuration of utility interactive photovoltaic system which generated power supply for dormitory In this paper represent 50kw utility PV system examination result

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.189-201
• /
• 1999

According to the current trend of single arm type pantograph for high speed trail korean pantograph designed to single arm type will be installed on each power car roof of prototype train of korean very high speed rail configured to 7 cars and have the characteristics of maximum 1% contact loss at 350 km/h speed. This study is devoted to design basically element components of pantograph for korean very high speed train on the basis of kinematic analysis, static analysis and dynamic analysis, followed by making the basic drawings of korean pantograph. This drawings will be complemented through certification tests of prototype pantograph and verification of analysis software.

• 한국측량학회지
• /
• 제30권4호
• /
• pp.353-362
• /
• 2012

건물모델의 정규화 없이 3차원 건물 모델링을 하면 건물모델에 왜곡이 발생하거나 위상적 불일치가 발생할 수 있다. 반면에, 정규성을 고려할 경우 제약조건으로 인하여 재구성이 가능한 건물 유형이 제한적일 수 있다. 이에 본 연구에서는 보다 다양한 건물을 고려한 건물모델 정규화 방법을 적용하여 항공라이다 데이터로부터 3차원 건물을 모델링하였다. 우선 특징공간에서의 군집화와 객체공간에서의 분할을 통해 건물점들을 지붕면으로 분할한다. 건물모델 구성요소 간의 평행성, 대칭성, 일치성 등을 충족시키기 위하여 면-선-점의 순차적 조정에 의한 정규화를 통해 3차원 건물을 재구성한다. 도시 지역에 대한 실험을 통해 기존의 방법들보다 다양한 형태의 건물에 대하여 정규성을 충족하는 3차원 모델을 생성할 수 있음을 확인하였다. 또한, 정규화가 건물모델의 정확도에 미치는 영향을 정량적으로 분석하였다.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.177-192
• /
• 2002

Computation solutions for the flow around a cube, which were generated as part of the Computational Wind Engineering 2000 Conference Competition, are compared with full-scale measurements. The three solutions shown all use the RANS approach to predict mean flow fields. The major differences appear to be related to the use of the standard $k-{\varepsilon}$, the MMK $k-{\varepsilon}$ and the RNG $k-{\varepsilon}$ turbulence models. The inlet conditions chosen by the three modellers illustrate one of the dilemmas faced in computational wind engineering. While all modeller matched the inlet velocity profile to the full-scale profile, only one of the modellers chose to match the full-scale turbulence data. This approach led to a boundary layer that was not in equilibrium. The approach taken by the other modeller was to specify lower inlet turbulent kinetic energy level, which are more consistent with the turbulence models chosen and lead to a homogeneous boundary layer. For the $0^{\circ}$ case, wind normal to one face of the cube, it is shown that the RNG solution is closest to the full-scale data. This result appears to be associated with the RNG solution showing the correct flow separation and reattachment on the roof. The other solutions show either excessive separation (MMK) or no separation at all (K-E). For the $45^{\circ}$ case the three solutions are fairly similar. None of them correctly predicting the high suctions along the windward edges of the roof. In general the velocity components are more accurately predicted than the pressures. However in all cases the turbulence levels are poorly matched, with all of the solutions failing to match the high turbulence levels measured around the edges of separated flows. Although all of the computational solutions have deficiencies, the variability of results is shown to be similar to that which has been obtained with a similar comparative wind tunnel study. This suggests that the computational solutions are only slightly less reliable than the wind tunnel.