• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.227-233
• /
• 2008

Porous concrete has large continuous voids of 20-30 % by volume, and this concrete is attractive as environmental material in Japan i.e. permeable road pavement, river bank protection with vegetation and green roof system which influence thermal environment. It is necessary to confirm the frost resistance when constructing porous concrete structure in cold region. However applicable test method and evaluation criterion of porous concrete has not defined yet. Therefore, the object of this study is to investigate the frost resistance of porous concrete and this investigation attempts to address this concern by comparing 4 kinds of specified freezing and thawing tests methods (JIS A1148 procedure A/B and RILEM CIF/CDF test) in consideration of actual environment. RILEM freeze-thaw tests are different from JIS A1148 freeze-thaw tests, which are widely adopted for evaluating the frost resistance of conventional concrete in Japan, in water absorption, cooling rate, length of freezing and thawing period, and number of freezing and thawing cycles. RILEM CIF test measures internal damage and is primarily applicable for pure frost attack. CDF test is appropriate for freeze-thaw and de-icing salt attack. JIS A1148 procedure A/B showed extremely low frost resistance of porous concrete if the large continuous voids were filled with water and the ice expansion in the large continuous voids set in during cooling. Frost resistance of porous concrete was improved by mixing coarse aggregate (G7) which particle size is smaller and fine aggregate in JIS freezing and thawing tests. RILEM CIF/CDF test showed that freeze-thaw and de-icing resistance of porous concrete was seems to be superior in that of conventional concrete.

• 콘크리트학회논문집
• /
• 제18권3호
• /
• pp.425-429
• /
• 2006

한국도로공사가 운영하고 있는 시험도로의 연속철근콘크리트 포장(CRCP) 구간에서 콘크리트 슬래브의 중간 깊이에서 수평방향으로 균열이 발생한 것을 발견하였다. 이러한 수평균열이 콘크리트 슬래브 내부에 어느 정도 존재하며 얼마나 진전되어 있는지를 조사하기 위하여 필요한 위치에서 코어를 채취하여 분석하였다. 또한 수평균열의 원인을 파악하기 위하여 수치해석을 수행하였다. 설계, 재료, 환경과 관련된 여러 가지 변수에 대하여 연구하여 수평균열을 야기할 수 있는 가능한 원인을 분석하였다. 수치해석모형은 유한요소법을 이용하여 개발하였으며 연속철근콘크리트 포장의 콘크리트 슬래브의 전단 및 수직 응력의 분포를 분석하였다. 수치해석 결과 최대 전단 및 수직인장 응력은 횡방향 균열의 위치에서 철근이 배근되어 있는 깊이에서 가장 크게 나타나는 것을 알 수 있었다. 이러한 최대 응력이 콘크리트의 강도에 다다르면 이러한 위치에서 수평균열이 발생하게 된다. 수평균열을 발생시키는 콘크리트의 최대응력은 환경하중, 콘크리트 열팽창계수, 콘크리트 탄성계수 등이 증가할수록 커지는 것을 알 수 있었다.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.95-104
• /
• 2014

PURPOSES : The purpose of this study is to evaluate the degree of restraint (DOR) of longitudinal steel at continuously reinforced concrete pavement (CRCP) against environmental loadings. METHODS : To measure the longitudinal steel strain, 3-electrical resistance and self-temperature compensation gauges were installed to CRCP test section (thickness = 250mm, steel ratio = 0.7%) and continuously measured 10 min. intervals during 259 days. In order to properly analyze the steel strains first, temperature compensation process has been conducted. Secondly, measured steel strains were divided into 12 phases with different events such as before paving, during concrete hardening, and after first cracking, etc. RESULTS : Thermal strain rate (TSR) concept is defined as the linear strain variations with temperature changes and restraints rate of longitudinal steel against environmental loadings (especially thermal loading) with different cases is defined as degree of restraint(DOR). New concept of DOR could be indirect indicator of crack width behaviors of CRCP. CONCLUSIONS : Before paving, DOR of longitudinal steel is almost same at the coefficient of thermal expansion of steel ($12.44m/m/^{\circ}C$) because of no restraint boundary condition. After concrete pouring, DOR is gradually changed into -1 due to concrete stiffness developing with hydration. After first cracking at crack induced area, values of DOR are around -3~-5. The negative DOR stands for the crack width behavior instead of steel strain behavior. During winter season, DOR reached to -5.77 as the highest, but spring this values gradually reduced as -1.7 as the lowest. Based on this observation, we can presume crack width decreased over time within the time frame of this study. This finding is not consistent with the current theory on crack width variations over time, so further study is necessary to identify the causes of crack width reducing. One of the reasons could be related to concrete stress re-distribution and stress relaxation.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.59-67
• /
• 2014

PURPOSES : The purpose of this study is to analyse the longitudinal steel strain and stress of continuously reinforced concrete pavement(CRCP) with longitudinal and transverse direction at early age using stress dependent strain analysis method. METHODS : To measure the longitudinal steel strain, 9-electrical resistance and self-temperature compensation gauges were installed to CRCP test section (thickness = 250mm, steel ratio = 0.7%) and continuously measured 10min. intervals during 30days. In order to properly analyze the steel stress first, temperature compensation process has been conducted. Secondly, measured steel strains were divided into stress dependent strain (elastic strain) and stress independent strain (thermal strain) and then stress dependent strain was applied to stress calculation of longitudinal steels. RESULTS : Steel strains were successfully measured during 30days. To verify the accuracy of temperature compensation process, measured coefficient of thermal expansion(COTE,$11.46{\times}10^{-6}m/m/^{\circ}C$) of longitudinal steel before paving was compared with that of unrestrained steel. Max. steel stress in the transverse direction shows about 266MPa at 23days after placement. CONCLUSIONS : Steel stresses in the longitudinal and transverse direction have been evaluated. In longitudinal direction, steel stress from the crack was rapidly reduced from 183MPa at crack to 18MPa from 600mm apart the crack. From this observation, stress effective length can be identified as within 600mm apart from the crack. In transverse direction, max. stress point was located near the center of pavement width and stress level(266MPa) is about 66% of yield stress of steel.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.45-52
• /
• 2017

PURPOSES : The main purpose of this study is to develop a high elastic modulus and low-shrinkage roller-compacted concrete base (RCCB) in order to prevent fatigue cracking and reflective cracking in the asphalt surface layer of composite pavement. Using a rigid base material with low shrinkage can be a solution to this problem. Moreover, a strong rigid base with high elastic modulus is able to shift the location of critical tensile strain from the bottom of the asphalt layer to the bottom of the rigid base layer, which can prevent fatigue cracking in the asphalt layer. METHODS : Sensitivity analysis of composite pavement via numerical methods is implemented to determine an appropriate range of elastic modulus of the rigid base that would eliminate fatigue cracking. Various asphalt thicknesses and elastic moduli of the rigid base are used in the analysis to study their respective influences on fatigue cracking. Low-shrinkage RCC mixture, as determined via laboratory testing with various amounts of a CSA expansion agent (0%, 7%, and 10%), is found to achieve an appropriate low-shrinkage level. Shrinkage of RCC is measured according to KS F 2424. RESULTS : This study shows that composite pavements comprising asphalt thicknesses of (h1) 2 in. with E2 > 19 GPa, 4 in. with E2 > 15 GPa, and 6 in. with E2 > 11 GPa are able to eliminate tensile strain in the asphalt layer, which is the cause of fatigue cracking in this layer. Shrinkage test results demonstrate that a 10% CSA RCC mixture can reduce shrinkage by 84% and 93% as compared to conventional RCC and PCC, respectively. CONCLUSIONS : According to the results of numerical analyses using various design inputs, composite pavements are shown to be able to eliminate fatigue cracking in composite pavement. Additionally, an RCC mixture with 10% CSA admixture is able to reduce or eliminate reflective cracking in asphalt surfaces as a result of the significant shrinkage reduction in the RCC base. Thus, this low-shrinkage base material can be used as an alternative solution to distresses in composite pavement.

• 대한교통학회지
• /
• 제21권6호
• /
• pp.77-88
• /
• 2003

동적통행배정모형을 이용해서 교통정보를 ㅈ공하기 위해서는 다양한 여행자의 경로선택행태를 고려하는 것이 필요하다. 여행자계층은 일반적으로 3가지 형태로 분류된다: 1) 버스나 지하철과 같은 대중교통의 고정된 경로(fixed route class)를 이용하는 그룹, 2) 자신이 인지하는 경로비용을(perceived route, unguided class) 판단하여 경로를 선택하는 그룹, 3) 정확한 경로선택에 대한 정보를(guided class)기반으로 경로를 선택하는 그룹. 본 연구에서는 이 3그룹의 여행자를 포함하는 동적통행배정모형의 해법을 제안한다. 제안된 해법에서는 링크의 교통량과 유출교통류를 진입교통류 단일변수로 축소하여 시간과 공간을 확장하기 않고 실재의 네트워크에서 최단경로를 도출하는 방법을 적용한다. 따라서 시간종속적인 통행비용함수에 진입교통유율, 교통량, 유출교통유율 3가지 변수를 고려해야 하는 시공간확장방법에 비해 네트워크의 규모와 수행시간에 있어 유리하다.

• 유통과학연구
• /
• 제14권10호
• /
• pp.59-72
• /
• 2016

Purpose - This study expands the corporate social responsibility (CSR) model and concepts by adding to it the concepts of corporate identity and public existence responsibility. Then, this study examines the structural relationship between corporate identity and public existence responsibility. This study contributes to expanding CSR to give customers a different perspective from previous studies in that it specifically measures corporate public existence responsibility, corporate identity, and corporate value creation and investigates the structural relationship. Research design, data, and methodology - This study addresses specific research questions. First, it asks whether non-financial performance is a component of CSR; second, it asks if the improvement in the corporate image should be treated as its corporate identity; and third, it tries to expand CSR concepts from corporate citizenship and public market awareness to public existence responsibility. The research hypothesis is formulated to confirm the relationships among CSR, corporate value creation, corporate identity, and public existence responsibility. Result - This study confirms that CSR has a positive correlation with corporate value creation and that CSR has a relatively positive correlation with corporate identity and public existence responsibility. Additionally, it confirms a positive correlation between corporate identity and public existence responsibility. However, corporate identity and public existence responsibility do not have an effect on corporate value creation. However, the influence of public existence responsibility confirmed the influence of corporate value creation through corporate identity as a mediating variable. Conclusion - This study argues that CSR produces more general performance including both financial and non-financial performance. It also confirms that the goals and performance of CSR can substitute for corporate value creation from general performance. It further confirms that public existence responsibility includes market public awareness, corporate images, and corporate associations. It suggests that corporations should see themselves as having public existence responsibility. Further, they should devise strategies to build corporate identities that associate with corporate goals and visions. Finally, this study contributes to the expansion of perspectives on CSR theoretical concepts and goals of performance of the corporation throughout the corporate value creation process.

• 한국측량학회지
• /
• 제15권2호
• /
• pp.141-148
• /
• 1997

지속적인 PC의 발전 및 이에 반비례한 가격의 하락, Windows 95. Windows N/T로 이어지는 PC운영체제의 확장은 소규모 단지의 경우 PC에서도 도시기반시설관리정보체계의 운영가능성을 신중히 모색케 하고 있다. 이와 같은 점을 고려하여 AutoCAD를 이용하여 한국토지공사의 단지기반시설 업무인 pipe-based도시기반시설-상수, 우수, 오수-및 도로의 도면정보와 속성정보를 PC상에서 동시에 관리할 수 있는 자료자동화 시스템을 구축하였고, 향후 구축 방향 및 문제점을 논하였다.

• 한국도로학회논문집
• /
• 제14권1호
• /
• pp.17-24
• /
• 2012

본 연구에서는 다양한 실내시험을 통하여 국내에서 개발된 에폭시 아스팔트 혼합물의 공용성을 평가하였다. 최대입경 13mm의 밀입도 혼합물을 기초로 하여 아스팔트 바인더의 20% 또는 40%를 국산 및 일본산 에폭시 수지로 치환하여 4종류의 에폭시 아스팔트 혼합물의 배합 설계를 실시하였다. 에폭시 아스팔트의 가사시간이 에폭시 수지가 40% 사용한 경우 3시간, 20% 사용한 경우 6시간 정도임을 확인할 수 있었다. 휠트랙킹 시험, 간접인장 반복시험, 그리고 저온 휨 시험 결과 국산 및 일본산 에폭시 아스팔트 혼합물의 공용성이 일반 아스팔트 혼합물 보다 상당히 우수한 것으로 나타났다. 하지만 일부 에폭시 아스팔트 혼합물에서는 수분손상 가능성을 확인할 수 있었다. 또한 일본산 에폭시 아스팔트 혼합물과 국산 에폭시 아스팔트는 유사한 성능을 나타냈다. 또한 콘크리트 보수재로 개발한 국산 에폭시 아스팔트의 적합성을 평가하기 위하여 추가적으로 열팽창계수, 부착강도, 인장강도를 측정한 결과, 일반 콘크리트와의 부착력은 우수하고 인장강도는 유사한 것으로 나타났으나 열팽창계수는 5배정도 큰 것으로 나타났다.

• 터널과지하공간
• /
• 제23권2호
• /
• pp.87-98
• /
• 2013

국토의 70%가 산지인 우리나라는 도로건설 등에 필요한 토지가 매우 부족할 뿐만 아니라 환경에 대한 국민들의 관심이 고조되어 터널 시공이 증가하는 추세이다. 남해고속도로 냉정~부산간 확장공사 대동1터널 시공 시 계곡부 위치 및 갱문 이격으로 저토피가 발생하였고, 민원 등으로 착공이 지연되어 관통부 변경이 불가피하였다. 이에 다중TSP를 적용하여 관통부 위치를 변경하였고 안정해석을 실시하였다. 해석결과 터널의 안정성에 문제가 없는 것으로 나타났으며, 시공 중 추가적인 안정성을 확보하고자 계측기 설치 및 기계굴착, 저토피 구간 추가 보강, 반단면 굴착을 실시하였다.