• 한국음향학회지
• /
• 제26권7호
• /
• pp.353-360
• /
• 2007

급속한 도시화와 인구밀도의 증가로 도시의 주거지역은 점점 고층화, 고밀화 되어가는 추세이다. 그로 인하여 인구의 공간적 집중으로 발생하는 교통수요를 감당하기 위하여 도시내부 도로는 점차 증가하였으며, 주거지역은 도로에 바로 인접하여 개발되고 있다. 이에 따라 도로에 연접한 주거지역의 도로교통소음 문제를 해결하기 위하여 방음벽에 의존하는 실정이었으나, 경관저해, 소음차단성능저해 등 다양한 역기능이 발생하고 있다. 본 연구에서는 방음벽의 역기능을 해소하고 바람직한 개선방안을 제시하기 위하여 도로변에 위치한 주거지역의 현장측정을 통하여 시뮬레이션의 정확도를 검증한 후 방음시설별 성능평가 및 전체 지역을 분석하였다. 그리고 개선방안으로 건축물의 배치형태 변화와 도로단으로부터의 이격거리를 20m 증가시켰다. 분석 결과 도로변과 평행한 공동주택의 피해가 가장 심각하였고, 시설별 분석에서는 방음벽의 성능이 우수하였으며, 건물 배치형태는 $30^{\circ}$ 배치가 우수하며, 이격거리가 증가함에 따라 교통소음이 감소하는 것으로 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.301-302
• /
• 2008

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.948-951
• /
• 2014

Road traffic noise is closely related with urban forms and urban components, such as population, building, traffic and land-use, etc. Hence, it is possible to minimize the noise exposure problem depending on how to plan new town or urban planning alteration. This paper provides ways to apply for urban planning in consideration of noise through exposed noise estimation for urban planning alteration. Spatial autoregressive model which explains about 81.4% of road traffic noise from the former paper is used. The simulation results by the spatial statistical model are compared with those by the engineering program-based modeling for 5 small-scaled scenarios of urban planning alteration. The error from the limitation of containing informations inside the grid cell and the difficulties of reflecting acoustic phenomena is existed. Nevertheless, in the stage of preliminary design, the use of the statistical models that have been estimated well is useful in time and economically.

• International Journal of Contents
• /
• 제16권1호
• /
• pp.1-9
• /
• 2020

Recently, the number of traffic accidents on trunk roads tends to decrease due to the performance improvement of passenger vehicles. In the commuter rush hour of morning and evening, vehicles via residential road increases without going along trunk roads. Therefore, there are many traffic accidents of pedestrians (or bicycles) and vehicles on residential roads. In order to safeguard residents against traffic accidents, traffic calming devices (TCD), such as chicane, speed hump, and school zone, etc. have been introduced. Investigating these effects repeatedly is not easy since many times and efforts are required, such as observed at the place actually. In this paper, the effects of TCDs in residential areas, such as noise, speed, and emission of a vehicle, using Simulation of Urban Mobility (SUMO) are examined. As a result, it is found that it is possible to reduce the speed of the vehicle by TCD, and the level of noise at the location behind TCD becomes higher than the level of noise at the location of TCD implemented.

• 한국도로학회논문집
• /
• 제13권3호
• /
• pp.111-119
• /
• 2011

본 연구에서는 실시간으로 개별 차량에 대한 소음 예측 시뮬레이션을 통해 매 순간 소음지도와 Lmax, Lmin 등을 얻을 수 있는 소음 예측 모델을 제시하였다. GIS 지형처리 기법을 이용해 공간 모델 처리 기법을 바탕으로 실시간 교통소음예측 시스템 모델을 제안하고, 객체지향기법을 이용해 개발하였다. 실시간 소음 시뮬레이션 모델을 이용하여 교통 흐름의 변화에 따라 소음레벨, 소음지도 변화, Lmin, Lmax값을 한눈에 파악하거나 비교할 수 있다. 현장에서 수행한 소음측정치와 예측치를 비교한 결과, 대부분 거리에서 Leq는 2~3db, Lmax는 3~4db 이내의 차이를 나타내어 소음예측의 신뢰성이 양호함을 확인할 수 있었다. 개발된 시스템을 이용해 민감도 분석을 수행한 결과, 대형차 비율, 차량 속도, 방음벽 높이에 따라 소음레벨의 차이를 보였고, 특히 방음벽 높이는 Leq나 Lmin보다 Lmax에 큰 영향을 미치는 것을 알 수 있었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1087-1092
• /
• 2006

Recently, traffic noise level is rapidly increasing, and it is crowed caused by recently overcrowded and overgrown cities, and increasing traffic volume is emerging as a major factor of disrupting the living and working environment. In this situation, citizens are increasingly complaining about the traffic noise. The noise level of in major cities in Korea is serious and affects on citizens physically and psychologically. Many people live in residential areas around crowed roads in major cities, such as Seoul. Accordingly, the purpose of this study is to predict outside noise distribution of building through survey and simulation to make better sound insulation performance research. The result of this study shows that the traffic noise is influenced from ground 50m and analyzed that form of building and arrangement type must be considered to the level of noise decrease.

• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1124-1131
• /
• 2006

This paper presents a novel method to determine sound power level(PWL) emitted by a travelling vehicle for road traffic noise simulation. The PWL is evaluated by the equivalent sound pressure level (SPL) measured by close proximity method and the sound power correction factor derived from the maximum SPL measured by pass-by method and the propagation attenuation of vehicle noise during the pass-by measurement. Using the method, we derive the empirical formula for PWL estimation in 1/1-octave and overall frequency bands for 8 vehicles (automobile, SUV, small truck, large bus, trailer, 3 dump trucks) tested at two road surfaces (dense graded asphalt, 30mm transverse tinning concrete) of Korean highway test road. The suggested approach, if securing sufficient data to represent the acoustic characteristics of all vehicle types, has il strong merit to be able to evaluate sound power levels for any combination of vehicle categories and traffic volumes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.421-427
• /
• 2006

This paper presents a novel method to determine sound power level(PWL) emitted by a travelling vehicle for road traffic noise simulation. The PWL is evaluated by the equivalent sound pressure level(SPL) measured by close proximity method and the sound power correction factor derived from the maximum SPL measured by pass-by method and the propagation attenuation of vehicle noise during the pass-by measurement. Using the method, we derive the empirical formula for PWL estimation in 1/1-octave and overall frequency bands for 8 vehicles(automobile, SUV, small truck, large bus, trailer, 3 dump trucks) tested at two road surfaces(dense graded asphalt, 30mm transverse tinning concrete) of Korean highway test road. The suggested approach, if securing sufficient data to represent the acoustic characteristics of au vehicle types, has a strong merit to be able to evaluate sound power levels for any combination of vehicle categories and traffic volumes.

• 환경영향평가
• /
• 제16권6호
• /
• pp.485-494
• /
• 2007

Air pollution and traffic noise from roads distributed near residential area has been a major social problem. In this study, an environmental pollution map for a residential area of Shihung-city was made by an expectation model based on hourly traffic volume change. Using the result from the model, a plan to reduce population in the residential area was established. The result of the modelling is summarized as follows: 1. At peak traffic hours (18 o'clock), 301-500 degree in hazardous and $d_{25}$ degree (25% of the residents are suffering extremely from the noise) in noise pollution were predicted in Jeongwang Main Road in Shihung city. 2. The calculated critical pollutant standard index, PSI showed the air pollution level, especially PM-10 high enough to require re-entrainment. 3. It was expected air pollution would extensively extend over the area distribution of each degree. However, noise pollution problem was limited to the area near roads.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2361-2367
• /
• 2011

In this paper survey and analysis of recent trends in noise barriers and noise measurements and assessments were conducted for providing design basis of ANC barriers. Looking at the results, transparent barrier(glass) has received the most attention in domestic and foreign countries, because it has a harmony with the surrounding environment and easy installation in a small space. For optimal barrier design using computer simulation, reliability of simulation has been verified and classified into 5 groups, according to barrier's upper cross section. Evaluation results of barrier's performance and design using computer simulation are as follows : In the case of the "B-type" barrier, it has improved maximum 2.5dB(A) at each point(R1~R6) and have a good workability. Therefore, "B-type" Barriers applied to the next active noise barrier system will be possible.