• 소성∙가공
• /
• 제12권2호
• /
• pp.83-87
• /
• 2003

Current state of plastic processes of steel bearing parts is surveyed. According to the advances in plastic forming technologies and their great advantage to mass production, plastic processes are adopted in manufacturing majority of bering parts. The rings are forged or ring rolled and the rolling elements, i.e, balls or rollers are cold formed before fine machining. Bearing's steel retainers are mainly press formed using cold rolled seel strips. Including the general explanation about above processes, some details of forging technology, control of forging temperature and after cooling process, and examples of computer simulation are described.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.534-539
• /
• 1986

This paper considers the ring rolling process contorl and treats the problem of controlling the pressure roll and conical roll motion which critically affects final quality of the rolled products. Since the process dynamics reveals nonlinear characteristics and parameter uncertainty, an adaptive control scheme was applied. The results show that this proposed adaptive control scheme can produce rolled rings of closer dimensional tolerances as compared with nonadaptive control system.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.38-45
• /
• 2017

A finite element analysis-based approach which investigates the causes of the breakdown in the outer ring of the choke at hot rod rolling mill is presented. Two-dimensional drawings of the whole vertical-type mill stand are transformed into three-dimensional CAD models. Non-linear elasto-plastic deformation analysis of material at the roll gap is performed for computing roll force and torque of the work roll. Then, the reaction forces of the bearing rings together with a set of roller bearings that support the work roll are obtained by means of rigid body motion analysis. Finally, stress behaviors in the bearing rings together with a set of roller bearings that support the work roll are investigated by linear elastic analysis. Results reveal that stress at the contact area between the outer ring and roller bearing is extraordinary high when an internal gap between an external surface of the outer ring and the internal surface of the chock due to wear of the inside of the chock occurs.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.425-428
• /
• 2009

Aerospace engine application needs to stand high temperature and pressure. Because of its mechanical properties such as high strength at high temperature, Alloy 718 is used aerospace engine application about 80%. But alloy 718's mechanical properties cause some problem to manufacturing profile ring like damage of material and mold. In this study, alloy 718's mechanical properties investigated for knowing its formability and using FE-Simulation for designing profile ring roll process and mold shape. Profile ring rolling processing is designed with "Initial material$\rightarrow$Blank$\rightarrow$Linear Ring$\rightarrow$Profilering". Blank's heating temperature is setting $1100^{\circ}C$ for manufacturing a trial profile ring on the basis of FE-Simulation. As a result of manufacturing alloy 718 profile ring, it is possible to make near target profile shape ring with all of the processing condition which gives in this study.

• 대한기계학회논문집A
• /
• 제38권1호
• /
• pp.65-70
• /
• 2014

본 연구는 외경부에 단이 존재하는 제품의 링롤링작업을 위한 예비성형체의 설계에 관한 연구이다. 형상링롤링 공정에서 가장 일반적으로 나타나는 결함 중 하나는 미충진이며, 변형량이 적을 경우나 외경부 단의 깊이가 클 경우 발생한다. 이러한 미충진을 방지하기 위해서는 변형량을 증가시키거나 예비성형체를 최종형상에 근접하도록 설계하여야 한다. 결함이 없는 제품을 생산하기 위하여 형상비와 성형비를 이용한 충진한계식을 제안하였다. 충진한계식은 네가지 경우에 대하여 유한요소해석과 시험생산한 결과를 토대로 작성되었다. 실물 크기의 형상링롤링 작업을 수행하고 충진한계식을 이용한 예측과 비교함으로써 제안된 방법의 타당성을 검증하였다.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.40-47
• /
• 1993

To diversify the area of application of UBET to the analysis of ring rolling which produces rings having more complex cross-sectional configuration, an element of triangular cross-section has been introduced and the corresponding kinematically admissible velocity field has been derived while considering the material flow between neighboring elements. The theoretical perdictions in roll torque and profile formation show good agreement with the experiments. The effect of process parameters such as feed rate and taper angle of the roll groove has been discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.77-78
• /
• 2007

• 소성∙가공
• /
• 제19권6호
• /
• pp.329-336
• /
• 2010

Ring forging process is more appropriate for high-length and thin walled ring, because it utilizes the forging press and hence does not require heavy-duty ring rolling mill. Although ring forging process is very simple and economic for facilities, the process is not efficient because of multi-forging-step and low material utilization. An effective ring forging process is developed using a hollow ingot. When a hollow ingot is used with a workpiece, the ingot can be forged into a final ring without multi-stage pre-forging process, such as, cogging, upsetting, and piercing, etc.. Finally it has advantages of the material utilization and process improvement because a few reheating and forging process are not necessary to make workpiece for ring forging. The important design variables are the applied plastic deformation energy to eliminate cast structure and make uniform properties. In this study, the mechanical properties after forging of hollow cast ingot were investigated from the experiment using circumferential sectional model. Also, the effects of process variables were studied by FEM simulation on the basis of thermo-visco-plastic constitutive equation. Applied strain is different at each position in length direction because diameter of hollow ingot is different in length direction. The different strain distribution become into a narrow gap by additional plastic deformation during diameter extension process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 춘계학술대회논문집
• /
• pp.233-237
• /
• 1995

Effects of frictional laws on finite element solutions in bulk metal forming were investigated in this paper. The Coulomb friction and the constant shear friction law were compared through finite element anlayses of compression of ring and cylinders with different aspect rations, ring-gear forging and hot strip rollin under the isothermal condition. It has been shown that two laws may yield quite different results inthe case that the aspect ration of a process is large, for example , strip rolling and ring -gear forging and that the difference depends mainly on the aspect ratio and the friction.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.92-100
• /
• 1997

An upper-bound elemental technique (UBET) analysis is carried out to improve the material flow and to reduce the load of bearing-race forming process. The UBET analysis, which adapts the advantages of stream function and finite element method, is useful for predicting the profile of complex geometric bound- ary. From the UBET analysis, the forming load, the velocity distribution and the stream line of the deformed billet are determined by minimizing the total power consumption with respect to chosen parameters. The results of present UBET analysis are better than those of previous UBET analysis. Experiments have been carried out with model material plasticine billets at room temperature. The theoretical predictions for forming load and flow pattern(stream line) are in good agreement with the experimental results.