• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.107-116
• /
• 1993

In the design and operation of robitic arm with flexible links, the equation of motion are required to exactly model the interaction between rigid body motion and elastic motion and to be formulated efficientlyl. In this paper, the flexible link is represented by applying the D-H rigid link representation method to measure the elestic deformation. And the equations of motion of robotic arm, which are configured by the generalized coordinates of elastic and rigid degrees of freedom, are formulated from the principle of virtual power. Dynamic characteristics due to elastic deformation of each link are obtained by using F. E. M to model complex shaped link acurately and by eliminating elastic modes of higher order that do not largely affect motion to reduce the number of elastic degrees of freedom. Also presented is the result of simulation of flexible robotic arms whose joints are controlled by direct or PD control.

• 한국해양환경ㆍ에너지학회지
• /
• 제13권2호
• /
• pp.83-90
• /
• 2010

해양파 중에서 2개 선체가 가까운 거리에 계류되어있는 경우에 2선체의 운동을 엄밀한 파 중 2 부유체 운동이론에 의하여 계산하였다. 2 선체의 방사 및 산란파 포텐셜은 특이파 수 현상이 없는 주파수영역 Improved Green 적분방 정식으로부터 구하였다. 규칙파 중에서 근접한 2선체가 서로 연결되지 않은 경우와 강체 연결장치로 병렬 계류된 된 경우의 운동 및 강체연결체에 작용하는 6방향 힘과 모오멘트를 해석하는 기법과 수치실험 결과도 보였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권2호
• /
• pp.61-71
• /
• 2005

The study reported deals with investigating the feasibility of control strategy for a serial rigid link manipulator that applies impulsive torques at the joints. The strategy is illustrated for a planar three rigid link manipulator. An impulse-based concept which uses successive torque impulses on rigid link as the controller for motion correction was introduced. This control strategy was tested over the entire trajectory to demonstrate that the tracking error could be reduced effectively. The best condition for minimizing the tracking error with the least impulse input at each joint is investigated by considering one design and one operating parameter. The first was the damping in the system, and the second was the sampling time during operation. The results show that this approach can provide useful guidance for the design and control of robot manipulators that require minimum impulse feedback for accurate tracking.

• 한국공간구조학회논문집
• /
• 제3권2호
• /
• pp.101-107
• /
• 2003

There exists a structural problem for link structures in the unstable state. The primary characteristics of this problem are in the existence of rigid body displacements without strain, and in the possibility of the introduction of prestressing to change an unstable state into a stable state. When we make local linearized incremental equations in order to obtain knowledge about these unstable structures, the determinant of the coefficient matrices is zero, so that we face a numerically unstable situation. This is similar to the situation in the stability problem. To avoid such a difficult situation, in this paper a simple and straightforward method was presented by means of the generalized inverse for the numerical analysis of stability problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.21-26
• /
• 1988

The application of robot to industry is increasing and as a result the study on robot is widely being carried out. In this study, to improve the accuracy of robot motion the method which calibrates initially assumed link parameters is considered. This method calibrates 4N link parameters for N D.O.F. robot with rigid links.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3883-3891
• /
• 1996

Performance and productivity of robot manipulator can be improved by increasing its working speed and extending its link length. But heavy weght of the commercial robot links, considered as "rigid body", limits its mazimum working speed and the weght of the links can be reduced for high speed operation. But this light-weight link or long link for special use cannot be consideredas "rigid" structure and vibration of the link due to its flexibility causes errors in end-effector position and orientation. Thus the elastic behaviro of the flexible link should be taken care of for increasing work speed and getting smaller error of end-effector position. In this paper, the fuzzy control theory is selected to design the controller which controlos the joint positions of the robot manipulator and suppress the vibration of flexible link. In the forst place, for the 1 DOF flexible link system, the fuzzy control theory is implemented. The contdroller for the 1 DOF flexible link system is designed. Experimental research is carried out to examine the controllability and the validity of the fuzzy control theory based controller. Next, using the extended desing schemes for the case of the 1 DOF flexible link system and usign the experimental phenomena of the 3 DOF flexible link system, the fuzzy controller for the 3 DOF flexible link system is desinged and experimented.ed and experimented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.472-475
• /
• 1997

The principle objective of this paper is to explain and demonstrate the advantage of the output-feedback controller proposed by Ailon in [61 by using simulation and experimental results. Namely, the goal of this study is to design and implement a real-time controller for set-point regulation of a one-link rigid robot manipulator with unknown parameters using only position measurement. For implementation a direct drive one-link rigid robot manipulator is constructed and a TMS320C40 DSP systems board is used in implementing real-time control algorithm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.233-238
• /
• 2001

In the design and operation of robot arms with flexible links, the equations of motion are required to exactly model the interaction between rigid motion and elastic motion and to be formulated efficiently. Thus, the flexible link is represented on the basis of the D-H rigid link represented to measure the elastic deformation. The equations of motion of robot arms, which are configured by the generalized coordinates of elastic and rigid degrees of freedom, are formulated by using F.E.M to model complex shaped links systematically and by eleminating elastic mode of higher order that does not largely affect option to reduce the number of elastic degree of freedom. Finally presented is the result of simulation to flexible robotic arm whose joints are controlled by direct or PD control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.533-538
• /
• 1991

In the design and operation of robot arms with flexible links, the equations of motion are required to exactly model the interaction between rigid motion and elastic motion and to be formulated efficiently. Thus, the flexible link is represented on the basis of the D-H rigid link representation to measure the elastic deformation. The equations of motion of robot arms, which are configured by the generalized coordinates of elastic and rigid degrees of freedom, are formulated by using F.E.M. to model complex shaped links systematically and by eliminating elastic mode of higher order that does not largely affect motion to reduce the number of elastic degree of freedom. Finally, presented is the result of simulation to flexible robotic arm whose joints are controlled by direct or PD control,

• 대한기계학회논문집A
• /
• 제36권7호
• /
• pp.745-750
• /
• 2012

이 논문에서는 강체 메커니즘의 위상 최적설계를 위해 제안된 구속조건 힘 설계 기법(constraint force design method)을 확장하여 로프-링크(string-link)를 고려한 위상 최적설계기법을 제안한다. 기존의 메커니즘 설계이론을 이용하여 메커니즘을 구성하는 강체 링크의 길이와 조인트의 위치를 최적설계하는 것은 가능하다. 하지만 강체 메커니즘의 최적 위상을 설계하는 것은 어렵다는 것으로 알려져 있다. 강체 메커니즘의 최적 위상을 설계할 수 있는 기법인 구속조건 힘 설계 기법이 본 연구자들에 의해 제안되었다. 구속조건 힘 설계 기법은 이진수 설계 변수를 이용하여 강체 링크의 위상 최적설계를 가능하게 한다. 이번 연구에서는 강체 링크뿐만 아니라 로프-링크로 구성된 메커니즘을 위상 최적설계하기 위한 발전된 해석기법과 설계 기법을 제안한다.