• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.9-18
• /
• 2014

PURPOSES : The objective of this study is to evaluate the applicability of the pitch, which is produced during SDA petroleum upgrading process, as a pavement paving material. In order for the purpose, the physical and chemical properties of the pitch are analyzed, and then the various plasticizers are applied in the pitch. METHODS : Two types of pitch are selected from oil refinery companies, which are owned the SDA petroleum upgrading process. Also, two types of asphalt binders, PG 64-22 and PG 58-22, are employed to compare with the pitch because these two types of asphalt binders are currently used as paving materials. For the chemical property of the pitch, the composition of SARA (Saturate, Aromatic, Resin, Asphaltene), the elementary composition, and the functional group are analyzed. For the physical property of the pitch, the basic material property tests, such as penetration test, softening point test, flash point test, ductility test, and rotational viscometer test, are performed. Also, the DSR (Dynamic Shear Rheometer) test and the BBR (Bending Beam Rheometer) test are conducted using asphalt binder specimens obtained by both short term aging (Rolling Thin Film Oven, RTFO) and long term aging (Pressure Aging Vessel, PAV) processes. The rheological property of each pitch type is evaluated as a function of temperatures and loading cycles. PG 64-22 asphalt binder is used as a control material. RESULTS AND CONCLUSIONS : The Pitch may not be suitable for the pavement paving material without modifications, but the pitch can be used as alternatives of modified addictive or asphalt. If low molecular component, such as saturate and aromatic components, are added in the pitch based on the development of various plasticizers, it has a strong possibility for the pitch to be used as a alternative. However, in order to verify the performance property of the pitch, further research is needed.

• Food Science and Biotechnology
• /
• 제14권2호
• /
• pp.233-237
• /
• 2005

Rheological properties of acorn flour-guar gum mixtures (4% w/w) at different guar gum concentrations (0, 0.2, 0.4, 0.6, and 0.8% w/w) were evaluated in steady and dynamic shear. The acorn flour-guar gum mixtures at $25^{\circ}C$ showed high shear-thinning flow behavior (n= 0.20-0.27). Consistency index (K), apparent viscosity (${\eta}_{a,100}$), and Casson yield stress (${\sigma}_{oc}$) increased with the increase in guar gum concentration. Within the temperature range of $25-70^{\circ}C$, the {\eta}_{a,100}$ of mixtures obeyed the Arrhenius relationship with high determination coefficient ($R^2=\;0.974-0.994$). Activation energy values (5.37-6.77 kJ/mole) of acorn flour dispersions in the mixtures with guar gum (0.2-0.8%) were much lower than that (12.5 kJ/mole) of acorn flour dispersion (0% guar gum). Storage modulus (G'), loss modulus (G"), and complex viscosity (${\eta}^*$) increased with the increase in guar gum concentration. Dynamic rheological data of 1n (G', G") versus ln frequency (w) of guar gum-acorn flour mixtures had positive slopes with G' greater than G" over most of the frequency range, indicating that they exhibited weak gel-like behavior.

• 한국정밀공학회지
• /
• 제10권1호
• /
• pp.134-141
• /
• 1993

Electro-Rheological(ER) fluids undergo a phase-change when subjected to an external electic field, and this phase-change typically manifests itself as a many-order-of-magnitude change in the rheological behavior. This phenomenon permits the global stiffness and energy- dissipation properties of the beam structures to be tuned in order to synthesize the desired vibration characteristics. This paper reports on a proof-of-concept experimental investigation focussed on evaluation the vibration properties of hollow cantilevered beams filled with an ER fluid. and consequently deriving an empirical model for predicting field-dependent vibration characteristics. A hydrous-based ER fluid consisting of corn starch and silicone oil is employed. The beams are considered to be uniform viscoelastic materials and modelled as a viscously-damped harmonic oscillator. Natural frequency, damping ratio and elastic modulus are evaluated with respect to the electric field and compared among three different beams: two types of different volume fraction of ER fluid and one type of different particle concentration of ER fluid by weight. Transient and forced vibration responses are examined in time domain to demonstrate the validity of the proposed empirical model and to evaluate the feasibility of using the ERfluid as an actuator in a closed-loop control system.

• 한국축산식품학회지
• /
• 제42권5호
• /
• pp.889-902
• /
• 2022

With increasing consumer demand for "clean label" products, the use of natural ingredients is required in the food industry. Protein/polysaccharide complexes are considered good alternatives to synthetic emulsifiers and stabilizers for formulating stable emulsion-based foods. Milk protein and carrageenan are widely used to improve the physical properties and stability of dairy food products. In a previous study, milk protein isolate (MPI) was conjugated with 𝛋-carrageenan (𝛋-Car) in a wet-heating system through the Maillard reaction, and the Maillard conjugates (MC) derived from MPI and 𝛋-Car effectively improved the stability of oil-in-water emulsions. Therefore, MPI/𝛋-Car conjugates were used in whipping cream as natural emulsifiers in this study, and the physical and rheological properties of whipping creams stabilized using MPI/𝛋-Car MC and MPI/𝛋-Car electrostatic complexes (EC) were investigated. The whipping creams stabilized with MPI/𝛋-Car MC have lower rheological parameters (η_a,50, K, G', and G'') than those of whipping creams stabilized with MPI/𝛋-Car EC. Although the overrun value was slightly reduced owing to the addition of MPI/𝛋-Car MC, the stability of the whipped creams with MC was effectively improved due to enhanced water-holding ability by conjugation.

• Advances in concrete construction
• /
• 제13권4호
• /
• pp.281-289
• /
• 2022

3D printing cement-based materials (3DPCBM) is an innovative rapid prototyping technology for construction materials. This study is tested on the rheological behavior, printability and buildability of steel slag (SS) content based on the extrusion system of 3D printing. 0, 8 wt%, 16 wt%, 24 wt%, 32 wt% and 40 wt% SS was replaced cement, The test results revealed that the addition of SS would increase the fluidity of the printed paste, prolong the open time and setting time, reduce the plastic viscosity, dynamic yield stress and thixotropy, and is beneficial to improve the pumping and extrudability of 3DPCBM. With the increase of SS content, the static yield stress developed slowly with time which indicated that SS is harmful to the buildability of printing paste. The content of SS in 3DPCBM can reach up to 40% at most under the condition of satisfying rheological property and buildability, it provides a reference for the subsequent introduction of SS and other industrial solid waste into 3DPCBM by explored the influence law of SS on the rheological properties of 3DPCBM.

• 한국식품과학회지
• /
• 제21권6호
• /
• pp.826-831
• /
• 1989

농후 고추장-물 현탁액의 리올로지 거동을 검토하였다. 리올로지 거동은 Herschel-Bulkley식에 적합하였다. 가수량 12.5-100%의 모든 고추장 현탁액은 전단속도 $0.25-179.20sec^{-1}$에서 항복응력을 갖는 의가소성을 보였으며, 전단속도 $5.16sec^{-1}$ 이상에서는 전단속도가 증가함에 따라 의가소성이 더욱 증가함을 보였다. 또, 이들 의가소성은 가수량의 증가 및 측정온도의 감소로 더욱 약해졌다. 고추장 현탁액의 점조도지수에 대한 온도의존성은 매우 낮았으며 점조도지수 값은 고형분함량의 증가로 낮아졌으나 가열로 증가되었다. 고온에서의 리올로지 거동에 대한 주요인 성분은 발효 중의 미분해 전분 또는 단백질인 것으로 추정되었으며, 식초첨가에 의한 리올로지 거동의 변화는 단지 희석효과에 기인하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 추계학술발표회 논문집
• /
• pp.373-379
• /
• 2011

• 한국식품영양과학회지
• /
• 제45권4호
• /
• pp.562-568
• /
• 2016

유자의 이용성을 높이기 위해 유자펙틴 추출물을 첨가한 요구르트를 제조하여 이화학적 특성을 평가하였다. 본 연구에서 추출된 유자펙틴 추출물의 uronic acid 함량은 53.93%였다. 유자펙틴 추출물 첨가 요구르트의 이화학적 특성 실험에 따르면 실험군의 pH는 4.3으로 나타났으며 실험군의 유산균 수는 식품공전에 명시된 요구르트 제조 기준에 적합하였다. 정상유동 특성의 경우 유자펙틴 추출물 첨가 요구르트의 n값은 1보다 낮은 범위(n=0.33~0.44)에 있어 shearthinning 유체 특성이 있었다. 점조도 지수, 겉보기 점도의 경우 대조군보다 모든 유자펙틴 추출물 첨가 요구르트가 유의적으로 높았다. 동적 점탄성의 경우 저장탄성률(G')과 손실탄성률(G'')은 주파수가 증가함에 따라 유의적으로 증가하였고, G'의 수치가 G''보다 뚜렷하게 높았다. 유자펙틴 추출물 첨가 요구르트의 복소점도 값은 대조군보다 유의적으로 높았으며, 점성적 성질에 비해 탄성적 성질이 더욱 우세하였다. 또한 유자펙틴 추출물 첨가 요구르트는 약한 겔과 같은 구조적 성질을 가지고 있었다. 결과적으로 유자펙틴 추출물 첨가가 요구르트의 점탄성에 영향을 줄 수 있음을 확인하였다. 소비자검사에서도 실험군의 기호도가 더 높은 것으로 보아 우수한 품질임을 알 수 있었다. 따라서 유자를 이용한 후 버려지는 유자껍질에서 펙틴을 추출하여 요구르트 제조에 첨가함으로써 향후 친환경적이며 고부가가치 요구르트 제조가 가능할 것으로 생각한다.

• Korea-Australia Rheology Journal
• /
• 제16권4호
• /
• pp.175-182
• /
• 2004

Colloidal coating solution was prepared to enhance the hydrophilic property of the film surface. Water and ethanol were used as the dispersion media and (glycidoxypropyl) trimethoxysilane (GPS) as a binder in the colloidal silica coatings. Ethylene diamine was added to the colloidal silica solution as the curing agent. The colloidal silica solution was regarded as a hard-sphere suspension model with low volume fraction of the silica particles. Rheological properties of the silica suspensions modified with GPS have been investigated as a function of pH and concentration. The acidic solution showed high viscosity change by fast hydrolysis reaction and adsorption of the organic binders on the surface of silica particles. However, the hydrolysis was slow at the basic condition and the binders combined with themselves by condensation. The viscosity change was smallest at pH 7. The viscosity increased with the curing time after adding ethylenediamine, and the increase of viscosity at low pH was higher than that at high pH. The hydrophilic properties of the coating film were investigated by the contact angle of water and film surface. The smallest contact angle was shown under the strong acidic condition of pH 2.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.791-794
• /
• 2008

MRE(Magneto-rheological Elastomer) is a material which shows reversible and various modulus in magnetic field. Comparing to conventional rubber vibration isolator, MREs are able to absorb broader frequency range of vibration. These characteristic phenomena result from the orientation of magnetic particle (i.e., chain-like formation) in rubber matrix. In this study, NR was used as a matrix in order to manufacture MREs. Magnetic reactive powder(MRP), having rapid magnetic reaction, was selected as a magnetic particle to give magnetic field reactive modulus. The mechanical properties of manufactured MREs were measured without the application of magnetic field. The results showed that the tensile property and resilience were decreased while the hardness was increased with the addition of CIP. The analysis of MR effect was carried out by FFT analyzer with various magnetic flux. As the addition of MRP and magnetic flux increased, increment of MR effect was observed.