• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.604-607
• /
• 2005

In the electro-discharge machining the machining performance is closely related to the characteristics of discharge which can be identified from electrical behavior in gap between workpiece and electrode. Therefore, the accurate prediction of electrical behavior in electro-discharge machining (EDM) is useful to process control and optimization. However, any simulation model fur prediction of electrical behavior in EDM process has never been reported until now. In this study, a simulation model is developed to analyze the electrical behavior of electro-discharge plasma which significantly influences electrical behavior in EDM process. For the purpose of this the fundamentals of electro-discharge mechanism such as inception, propagation, formation of plasma channel and termination are investigated to accurately predict the cycle of discharge plasma in EDM. As a result, a mathematical model of electro-discharge plasma is constructed with considering the fundamentals of electro-discharge plasma. Consequently, it is demonstrated that the developed model can predict the electrical behavior of plasma such as electron density in various conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2214-2216
• /
• 2005

This paper is researched discharge and ozone generation characteristics of ozonizer using $Al_2O_3$ Ceramic dielectric. The discharge characteristics with variation of the discharge electrode area is studied. The characteristics of ozone concentration. ozone generation and ozone yield were measured to discharge power, discharge electrode area and supplied gas flux for oxygen and air. The solubility of ozone for water concentrations and ozone generations proportional to discharge power and discharge electrode area. Ozone yield has slowly increase with Increasing discharge power at high flow-rate. As the result, the maximum values of ozone characteristics ozone generation and ozone yield, can be obtained 5817[ppm] and 36[g/kWh]. We make enough the ozone concentration as the air in the home. An electric discharge electrode area is apt to shrink gradually into a miniaturization trend of the ozonizer but the enlargement of the occurrence flight of the electric discharge area gives the characteristic enhance the aid in the identity condition through the structure improvement.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.2000-2004
• /
• 2009

In general, for the condition monitoring of a power transformer using the UHF PD measuring technique, detection of any partial discharge, identifying the defect in the transformer and locating the insulation defect are necessary. In this paper one of the most frequent detects which can result in turn to turn fault in power transformer was examined for identifying the defect. In order to model the defect, as a discharge source, a partial discharge cell was used for experimental activity. Magnitude of electromagnetic wave signals and corresponding amount of apparent discharge were measured simultaneously against phase of applied voltage to the discharge cell. Frequency range and phase resolved partial discharge signals were measured and analyzed. The results will be contributed to build the defect database of power transformer and to decrease the occurrence of transformer faults.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1997년도 춘계 학술논문발표회
• /
• pp.67-75
• /
• 1997

To establish testing method for ignition energy of explosive powders caused by electrostatic discharge, one testing method using a very small quantity of tested powders ( Frima ) was proposed, and the influence of discharge - limiting resistance connected in series into a capacitive discharge circuit on ignition energies of explosive powders was investigated using, as tested powders. As a result the minimum ignition energy was 9 mJ when discharge-limiting resistance was 300 k$\Omega$. The reason for the dependence of ignition energy on discharge-limiting resistance was thought to the difference in the type of electrostatic discharge, such as arc or glow discharge, from the observation of discharging wave forms.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.539-540
• /
• 2006

In this paper, We examine that characteristics of formative electret with polymer film and electric charge storage using grid corona discharge. compound polymer of fluorine resin used for material in electret because of high electric charge accumulation, excellent electrical and physical characteristic. All experiments were carried out with circular samples of $Teflon^(R)FEP$ film, 12.5[${\mu}m$] thick. As experiment variables, we used voltage, electrode thickness, discharge electrode gap, and discharge time. According to this variables, we studied on characteristics of formative electret and electric charge storage. Additionally we make a comparative study of the result between the grid corona discharge and needle electrode discharge.

• 한국전기전자재료학회논문지
• /
• 제36권1호
• /
• pp.56-61
• /
• 2023

The characteristics of write discharge were investigated when the conventional driving method with the unipolar sustain voltages, and the single sustain driving method applying the bipolar sustain voltage were applied in an AC plasma display. In the case of having a single sustain waveform, the strength of the write discharge is weakened compared to the conventional driving method during the address period, because the wall charge inside the panel is more dissipated by the lower scanning voltage. In the driving method with a single sustain waveform, the bias voltage of the other electrodes was changed to improve the write discharge characteristics. As a result, the intensity of the discharge was enhanced by 32% and the delay time was shortened by 60 ㎲.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권6호
• /
• pp.323-327
• /
• 2006

In this paper a new wire-wire discharge system with a slit dielectric harrier has been proposed, and, its corona discharge and ozone generation characteristics have been investigated experimentally. When the slit mica barrier is installed between corona wires, instead of the grounded plate electrode, a significant increase in the generation of ozone, about 2.2 times higher than that of the conventional ones without the slit harrier, could be obtained. Photographs show that this type of discharge system with a slit barrier was found to produce a corona discharge twice, once from the upper and bottom corona wires, and. again from both sides of surfaces and slits of the slit barrier. As a result, the proposed discharge system has the potential to increase significantly ozone production and it may be useful as an effective means for removing pollutant gases.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1571-1575
• /
• 2006

하도 형성 유량은 현재 하도의 형태와 특성을 결정하는 유량을 말하는 것으로 지배유량라고도 불린다. 지배유량과 동일한 개념에서 충적하천에서 장기간에 걸쳐 동일한 규모의 유량이 하도에 적용된다고 가정할 때, 현재의 하천과 같은 형상을 나타내게 만드는 유량이 하도 형성 유량이며, 이것은 크게 강턱유량과 유효유량의 개념으로 설명된다. 금회 연구에서는 국내에서 많이 이용되는 1.58년 빈도의 홍수량을 포함하여 각종 빈도의 홍수량을 결정하고, 이를 1차원 부등류 해석 프로그램에서 모의하여 수위 및 유량을 결정하였다. 하도 형성 유량 산정을 위해 이용된 홍수의 빈도는 1.01년, 1.58년, 2년, 2.33년, 5년이다. 각 빈도별 홍수량은 해당하천의 하천정비 기본계획에서 제시된 80년 빈도 홍수량과 무차원성장곡선을 이용하여 산정하였다. 오차분석 결과 조사된 전체 하천에서 1.01년 빈도의 홍수량이 강턱에 가장 근접하는 결과를 나타내었으며, 국내에서 관행적으로 이용하던 국내에서 관행적으로 이용되는 1.58년 빈도 홍수량은 강턱유량의 개념에서 하도 형성 유량에 접근할 때는 과대하게 평가되는 점을 확인할 수 있었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1107-1111
• /
• 2006

하도 형성 유량은 현재 하도의 형태와 특성을 결정하는 유량을 말하는 것으로 지배유량라고도 불린다. 지배유량과 동일한 개념에서 충적하천에서 장기간에 걸쳐 동일한 규모의 유량이 하도에 적용된다고 가정할 때, 현재의 하천과 같은 형상을 나타내게 만드는 유량이 하도 형성 유량이며, 이것은 크게 강턱유량과 유효유량의 개념으로 설명된다. 금회 연구에서는 국내에서 많이 이용되는 1.58년 빈도의 홍수량을 포함하여 각종 빈도의 홍수량을 결정하고, 이를 1차원 부등류 해석 프로그램에서 모의하여 수위 및 유량을 결정하였다. 하도 형성 유량 산정을 위해 이용된 홍수의 빈도는 1.01년, 1.58년, 2년, 2.33년, 5년이다. 각 빈도별 홍수량은 해당하천의 하천정비 기본계획에서 제시된 80년 빈도 홍수량과 무차원성장곡선을 이용하여 산정하였다. 오차분석 결과 조사된 전체 하천에서 1.01년 빈도의 홍수량이 강턱에 가장 근접하는 결과를 나타내었으며, 국내에서 관행적으로 이용하던 국내에서 관행적으로 이용되는 1.58년 빈도 홍수량은 강턱유량의 개념에서 하도 형성 유량에 접근할 때는 과대하게 평가되는 점을 확인할 수 있었다.

• Child Health Nursing Research
• /
• 제12권2호
• /
• pp.268-276
• /
• 2006

Purpose: this study is attempted to provide basic data on development of systematic discharge educational programs for discharging cancer patients. Method: The subjects of this study were 132 mothers whose children were diagnosed with cancer and being treated at 3 university hospitals in Busan. The data were collected from December 1 to February 28, 2005, and were analyzed Using SPSS WIN 10.0. Result: The degree of education at the time of discharge from hospital was statistically significantly lower than that of educational demand after the discharge. Such demand significantly varied in accordance with the length of period passed after the discharge. Mother’s educational demand was significantly different in accordance with generation characteristics of her child with cancer, especially the first period of hospitalization and change in weight Conclusions: mothers of children with cancer were higher in educational demand after the child’s discharge from hospital than in education provided at the time of the discharge. Such demand was different in accordance with the length of period passed after the child's discharge from hospital.