• Composites Research
• /
• v.16 no.3
• /
• pp.58-67
• /
• 2003

To perform the realtime strain and fracture monitoring of the smart composite structures, two optical fiber sensor systems are proposed. The two types of the coherent sources were used for fracture signal detection - EDFA with FBG and EDFA with Fabry-Perot filter. These sources were coupled to EFPI sensors imbedded in composite specimens. To understand the characteristics of matrix crack signals, at first, we performed tensile tests using surface attached PZT sensors by changing the thickness and width of the specimens. This paper describes the implementation of time-frequency analysis such as short time Fourier transform (STFT) and wavelet transform (WT) for the quantitative evaluation of fracture signals. The experimental result shows the distinctive signal features in frequency domain due to the different specimen shapes. And, from the test of tensile load monitoring using optical fiber sensor systems, measured strain agreed with the value of electric strain gage and the fracture detection system could detect the moment of damage with high sensitivity to recognize the onset of micro-crack fracture signal.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.4
• /
• pp.256-264
• /
• 2013

This study presents a greening plan for the under space of elevated rail tracks to reducing landscape impairment and improve the streetscape. This study focuses on a section of the Daegu Metro line number 3 that includes a concentration of high-rise apartments and commercial areas. First, different types of planting were categorized for the under space of the elevated rail track, and then images of each planting type were created using a 3D simulation tool to evaluate the visual characteristics. The landscape images and related adjectives were assessed using a survey. As a result, rows of flower trees received the highest evaluation, and 'harmony' was identified as the most important factor affecting the railscape preference. These results can be important data for establishing an efficient greening plan for the under space of elevated rail tracks.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.3
• /
• pp.199-207
• /
• 2003

In the study, the open area keeping a few visible satellites and the urban area covered with the high building, an electric pole were chosen far evaluation of accuracy of satellite positioning. First, suggest the validity of GPS/GLONASS, TS/RTK-GPS, and compared the accuracy with that of the classical surveying method. As a result, In static relative surveying, the difference of between the known cadastral supplementary control station and that of the acquired is 0.000∼.0006m in GPS alone, GPS/GLONASS, and In the RTK-GPS/TS, 0.010∼0.077m on the non-ambiguity fixed solutions in the urban area 0.008∼0.078m in the open area. it proved to be valid because it is within the allowed connecting errors, i.e 12cm on the baseline of loom in l/l,200 cadastral map.

• Journal of Korean Society of Rural Planning
• /
• v.16 no.4
• /
• pp.53-60
• /
• 2010

This study aims at suggesting the attributes and limitations of each methods through the evaluation of the verified analysis results, so that it will be possible to select an efficient method that may be applied to assess the green coverage ratio. Green coverage areas of each sites subject to this study were assessed utilizing the following four methods. First, assessment of green coverage area through direct planimetry of satellite images. Second, assessment of green coverage area using land cover map. Third, assessment of green coverage area utilizing the band value in satellite images. Forth, assessment of green coverage area using and land cover map and reference materials. For this study, four urban zones of the City of Seosan in Chungcheongnam-do. As a result, this study show that the best calculation method is the one that combines the merits of first and second methods. This method is expected to be suitable for application in research sites of middle size and above. It is also deemed that it will be possible to apply this method in researches of wide area, such as setting up master plans for parks and green zones established by each local self-government organizations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.187-194
• /
• 1998

In this study, effective multispectral Landsat TM band combinations for a merging with the high resolution IRS-1C PAN data using the IHS method to improve landuse accuracy is discussed. From the pre-classified image using the merged images with TM all six band images(with the exception of band 6 image) and PAN image, a sample data which has ten classes was generated. An evaluation of the overall classification accuracy for the representative seven merged images which were merged using each TM three-band images and IRS-1C PAN image by IHS method for the sample area. The increase in classification accuracy is most significant with the inclusion of two of TM4, TM5 and TM7 infrared band images. Especially, the largest increase(11.8 percent) in landuse classification accuracy were investigated when Landsat TM247 bands were merged with IRS-1C PAN data. The classification accuracy when TM three band image and PAN image were used without merging is higher than result of the case of using the merged images.

• Korean Journal of Acupuncture
• /
• v.28 no.4
• /
• pp.79-89
• /
• 2011

Objectives : The aim of this study is to propose the W area of pulse (AW) as a new index which can confirm the arteriosclerosis by analyzing parameters of 5-level pressure pulse waveform measurement system for normotensive group according to aging. Methods : We measured radial pulse waveforms of normotensive group (20 to 60 years old) using 3-dimensional pulse imaging analyser (DMP-3000, DAEYOMEDI Co., Korea). And then we analyzed various parameters for sclerosis of the arteries such as Height (h1, h2, h3, h4, h5), Time (t1, t2, t3, t4, t5), AW, AW rate, Total area of pulse (At) and Augmentation Index (AIx). Results : As a result of analyzing parameters according to the aging, h2, h3, AS (systolic area rate to AT), AIx and AW were increased but t2/t, t3/t, t5/t and AD (diastolic area rate to AT) were decreased. Conclusions : We checked blood vessel conditions for normotensive group according to aging and confirmed various parameters. Also, we found that AW was analogous to AIx which has been used for diagnosing arteriosclerosis. Furthermore, we confirmed the usefulness of AW as a new parameter for checking vessel condition and characteristic compared with the AIx.

• KIEAE Journal
• /
• v.14 no.3
• /
• pp.5-13
• /
• 2014

This paper introduces emergy(spelled with "m") that is a new environmental indicator in architecture, aiming to clarify conflicting claims of building design components in the process of energy-retrofit. Much of design practitioners' attention on low energy use in operational phases, may simply shift the lowered environmental impact within the building boundary to large consumption of energy in another area. Specifically, building energy reduction strategies without a holistic view starting from natural formation, may lead to the depletion of non-renewable geobiological sources (e.g. minerals, fossil fuels, etc.), which leaves a building with an isolated energy-efficient object. Therefore, to overcome the narrow outlook, this research discusses the total ecological impact of a building which embraces all process energy as well as environmental cost represented by emergy. A case study has been conducted to explore emergy-driven design work. In comparison with operational energy-driven scenarios, the results elucidate how energy and emergy-oriented decision-making bring about different design results, and quantify building components' emergy contribution in the end. An average-size ($101.9m^2$) single family house located in South Korea was sampled as a benchmark case, and the analysis of energy and material use was conducted for establishment of the baseline. Adoption of the small building is effective for the goal of study since this research intends to measure environmental impact according to variation of passive design elements (windows size, building orientation, wall materials) with new metric (emergy) regardless of mechanical systems. Performance simulations of operational energy were developed and analyzed separately from the calculation of emergy magnitudes in building construction, and then the total emergy demand of each proposed design was evaluated. Emergy synthesis results verify that the least operational energy scenario requires greater investment in indirect energy in construction, which clearly reveals that efficiency gains are likely to be overwhelmed by increment of material flows. This result places importance on consideration of indirect energy use underscoring necessity of emergy evaluation towards the environment-friendly building in broader sense.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.5
• /
• pp.433-438
• /
• 2012

This paper is the second paper among two papers which constitute the paper about the structural design of a dental implant. This paper completed the test drafting for the structural model of the new dental implant whose structural performance was confirmed and verified through the comparative structural analysis carried out in the first paper. This paper finished the structural design of a dental implant by manufacturing the dental implant using CNC machines and so forth on the basis of the completed draft and finally by evaluating the machining condition of the dental implant. The drafting work was performed using MDT(Mechanical Desk Top). The manufacturing work was carried out using CNC machines, general purpose milling machine, and Wire EDM. The manufactured surface condition of the dental implant was evaluated and confirmed finally using an electron microscope. As a result of evaluation, a testing dental implant with very good condition was designed and manufactured.

• Journal of Korean Public Health Nursing
• /
• v.4 no.1
• /
• pp.25-35
• /
• 1990

This study examined the evaluation of the information effects of the teaching on knowledge and daily activities of open heart surgery patients between 2 and 6 weeks after discharge. The subject was 29 patients being taught with teaching materials at discharge as experimental group, 20 patients who received no education as control group among the patients who had undergone open heart surgery in S.N.U.H. And research method was non-equivalent control group non-synchronized quasi-experimental design. As the tool of this study, 30 items of knowledge measurement scale which was extracted among the content of teaching materials to evaluate the effect of education and 28 items of which were designed to measure the daily activities of patients with myocardial infarction for the estimation of the degree of observance in daily activities were used. For data analysis, frequency, t-test, Pearson's correlation coefficient and Cronbach's $\alpha$ were used. The result were as follows; 1. Informations given through teaching materials were effective for increasing the knowledge of the patient with open heart surgery. The knowledge of patients increased to the top level (p<0.05) in 2 weeks after discharge. In control group, the knowledge level of patients did not increase after discharge. 2. The knowledge level daily activity of the experimental group was somewat higher than that of the control group, but there was no significant difference. The score .of the experimental group was 69.66 in 6 weeks after discharge much less than the top level score 112. 3. The correlation between knowledge and daily activities was not significant, suggesting the fact that the increase of knowledge did not influence the daily activities significantly. Recommendation was suggested that; 1) Further studies might be .needed with the increasing numbers of the subjects. 2) Daily activities of the patients with open heart surgery should be investigated for long term period until they recovered normal activities.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1674-1680
• /
• 2017

In this paper, an embedded system for face authentication, which exploits high-dimensional local binary pattern (LBP) descriptor and joint Bayesian algorithm, is proposed. We also present a feasible embedded system for the proposed algorithm implemented with a Raspberry Pi 3 model B. Computer simulation for performance evaluation of the presented face authentication algorithm is carried out using a face database of 500 persons. The face data of a person consist of 2 images, one for training and the other for test. As performance measures, we exploit score distribution and face authentication time with respect to the dimensions of principal component analysis (PCA). As a result, it is confirmed that an embedded system having a good face authentication performance can be implemented with a relatively low cost under an optimized embedded environment.