• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.2
• /
• pp.114-124
• /
• 2015

In the city, the urban park contributes to the quality of citizen life in many ways, and the importance of the urban park as an urban planning facility is growing each day. In this study, evaluation of park service supply adequacy in Suwon-si, the difference in analysis methods, and the type of land use at urban park catchment area analysis were analyzed. As a result, there were remarkable differences between the two analysis methods. In Suwon-si, the catchment area by network analysis was only about 41% of catchment area by buffer analysis. However, when basic local authorities establish planning of parks and green areas, they use buffer analysis to calculate the park service area. It means that such calculations of urban park service areas may be wider than actually used. Also, because there were differences between urban park catchment areas by land use types, guidelines of planning parks and green areas will be adjusted. Although quantitative expansion of the park area is also important for the realization of green welfare, it is necessary to consider city characteristics such as the population size, population density, land use types, and so on.

• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.179-194
• /
• 2012

In this study, we compared the efficiency of container terminals using DEA. To do this, we designed an AHP/DEA hybrid model using AHP and DEA, and evaluated the efficiency by comparing the container terminal operation company in Gwangyang(KEC, KIT, GICT) and Busan(HBCT, DPCT, KBCT, UPT, Gamman, PNC, PNIT, HJNC, HPNT). The proposed model can control the number of selected promising container terminal by applying DEA-AR model. This model can also improve the credibility of analysis by using objective weights through the AHP application to efficiency evaluation data and normalizing the evaluation data to apply AHP and DEA. The model assumes inputs to be container crane, transfer crane, yard tractor, and reach stacker and output as container traffic. The result shows that DPCT was an efficient DMU.

• Journal of Technologic Dentistry
• /
• v.39 no.1
• /
• pp.35-42
• /
• 2017

Purpose: The purpose of this paper was to evaluate the occurrence of errors regarding adaptation by conducting a three-dimensional assessment comparing the bridge type dental restoration after the cutting process, which has multiple abutments, with a single type dental restoration. Methods: By using ten identical files obtained by scanning the master model, thirty designs were created consisting of ten maxillary right first premolars and ten maxillary right first molars with single crown abutments, along with ten bridge designs with the identical abutment. A 5-axis milling machine was used to produce the design file. The produced denture prostheses were scanned using a silicone replica for a STL file. An evaluation was conducted using 3D analysis software on the master model and each of the thirty data files. Results: The RMS value of the pre-molar (14) was $38.4{\pm}4{\mu}m$ for single and $54.7{\pm}6{\mu}m$ for bridge abutment; therefore, a statistically significant difference was observed for single and bridge designs although both shared the same abutment form (P<.05). Also, the RMS value of the molar (16) was $47.6{\pm}2{\mu}m$ and $56.6{\pm}5{\mu}m$ for the single and bridge designs, respectively, thereby presenting a statistically significant difference (P<.05). Conclusion: As a result, dental prosthesis fabricated using the single method presented better internal adaptation outcomes.

• Journal of Korean Academy of Nursing
• /
• v.31 no.6
• /
• pp.967-977
• /
• 2001

This study explored and described the living spiritual experience and was attempted to gain an understanding of spirituality. This was done by eliciting participants′ verbal descriptions of their experiences. Method: Data was obtained from in-depth interviews with one cancer patient, one pastor, and three missionaries after obtaining informed consent from each. Interviews were tape recorded and transcribed verbatim. The transcripts were analyzed using Colaizzi′s phenomenological method. Sandelowski′s evaluation criteria for qualitative research, such as reliability, suitability and auditability, were also used to establish reliability and validity of this study. Result: The five major theme clusters that designated the essence of the spiritual experience, "spiritual awareness," "interconnectedness," "love," "tran- scendent energy," "purpose and meaning in life," emerged from the analysis. Conclusion: This study revealed that spirituality was activated by awareness through introspection and interconnectedness with a Supreme Being. The interconnectedness with a Supreme Being played an important role in harmonious relationships with others and self. It also resulted in revealing the other beneticial attributes of spirituality. Love, the core concept of the interconnectedness, worked as a transcendent energy. Also, the ability to see beyond reality and resulted in finding meaning in life and accomplishing well being.

• Journal of Families and Better Life
• /
• v.17 no.3
• /
• pp.47-62
• /
• 1999

The purpose of this study was to investigate the problem coping strategies and depression of unemployed husband's wives and to analysis the social support(education and counseling program) needs for their psychological adjustment. The subjects were 139 unemployed husband's wives living in Seoul city and Kyungi-do province. The questionnaire method was used for data gathering. The major findings were as follows" 1) Wives perceived the most negative change of unemployed husband. Wives' depression was influenced by self-esteem evaluation of husband's coping behavior weak health passive coping strategies and negative change of husband and marital relation. 2) Wives needed education and counseling support the most in the area stress & mental health problem marital conflict and marital communication. The result of this study were discussed in the relation with the contents of education and counseling program for unemployed husbands' wives.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.6
• /
• pp.35-41
• /
• 2007

The rate of loading in motor operated valve(MOV) can be defined as a variation of correlation between the actuator torque and the thrust upon the variation of operating load. This paper contains the analysis of characteristic and the validity of loading rate in the opening stroke of gate type motor operated valve. Also, this paper describes the evaluation result of loading rate for 40 MOVs' opening stroke using newly derived methodology in this study. Author has found a result that loading rate of opening stroke gets a negative value when the differential pressure is higher than 150 psi and this value goes up depending on the amount of the differential pressure.

• Journal of the Korea Furniture Society
• /
• v.29 no.1
• /
• pp.31-39
• /
• 2018

Recently, as the continuously increasing of the one-person households, builders were focusing on a built-in furniture development for efficiency. Through the dead space of the space can be reduced. Also, Condensation that occurs in a built-in furnitures installation space may result in different results depending on the room's direction, floor, finish, adjacent room effect, occupant's lifestyle. In this background, it can be considered in terms of functional aspect and morphological aspect by using WUFI2D simulation system. As a result, the tendency of occurrence of condensation was examined by comparing the water content and the growth potential of fungus graph which came from WUFI2D. Results of this study are as followings: Built-in furniture, both top & bottom open, is more stable to condensation than the built-in furniture with the top or bottom open. Also, Among from the top floor built-in furniture to the bottom of it, the bottom one is more stable to condensation.

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.103-112
• /
• 2014

Area average rainfall estimation is important to determine the exact amount of the available water resources and the essential input data for rainfall-runoff analysis. Like that, the necessary criterion for accurate area average rainfall estimate is the uniform spatial distribution of raingauge network. In this study, we suggest the spatial distribution evaluation methodology of raingauge network to estimate better area average rainfall and after the suggested method is applied to Han River and Geum River basin. The spatial distribution of rainfall network can be quantified by the nearest neighbor index. In order to evaluate the effects of the spatial distribution of rainfall network by each basin, area average rainfall was estimated by arithmetic mean method, the Thiessen's weighting method and estimation theory for 2013's rainfall event, and evaluated the involved errors by each cases. As a result, it can be found that the estimation error at the best basin of spatial distribution was lower than the worst basin of spatial distribution.

• Journal of Navigation and Port Research
• /
• v.41 no.4
• /
• pp.181-188
• /
• 2017

In the existing ship sales market, prices determined based on the prices of similar ship types that recently traded. ince the 2008 financial crisis, ship prices have fluctuated, and ship price criteria have become ever more necessary to the imminent value of the ship. Therefore, this research used the hedonic price model to estimate imminent values of ships. In this study, the influence on ship prices was analyzed by the value of each characteristic and an estimated functional formula was. Out of the four models suggested by the hedonic price model, an optimal model was selected with variance inflation factors and a stepwise selection. For this, the influence of determinants of ship prices was analyzed based on actually traded ships and characteristic data. The selected model s the Log-Line model; as a result of regression analysis, eight variables, including DWT, Age, Market Value, Short-Term Charter, Long-Term Charter, Enbloc, Special Survey Due and Builder were to affect the ship price model. This model is expected to be useful for objective and balanced ship price evaluation.

• Journal of Sensor Science and Technology
• /
• v.20 no.2
• /
• pp.124-130
• /
• 2011

In this study, in order to evaluate the yield of bubble by ultrasonic cavitation in HIFU sonication, the bubble image analysis was performed. The changing phenomenon of cavitation effect according to the sonication condition was discussed by analyzing the bubble image. Especially the appearance of bubble cloud, the size of micro-bubble, and the yield of bubble were considered. The 500 KHz and 1.1 MHz concave type ultrasonic transducers were used for HIFU sonication. Computer controlled digital camera was used to obtain the bubble image, and the binary image processing(binarization coefficient : 0.15) was performed to analyze them. In results of 500 KHz and 1.1 MHz transducer, the area of bubble cloud was increased in proportion to the rise in sonication intensity($R^2$ : 0.7031 and 0.811). The mean size of single microbubble was measured as 98.18 um in 500 KHz sonication, and 63.38 um in 1.1 MHz sonication. In addition, the amount of produced bubble was increased in proportion to sonication intensity. Through the result of this study and further study for variable image processing method, the quantitative evaluation of ultrasonic cavitation effects in HIFU operation could be possible with the linearity associated with the sonication conditions.