• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.80-85
• /
• 1996

외부가압공기베어링중에서 Fig. 1과 같이 베어링 간극과 비슷항 크기의 간극을 갖는 슬롯을 통하여 공기를 공급하는 형태의 베어링을 슬롯 레스트릭터 공기베어링이라고 한다. 본 연구에서는 공기 윤활 외부가압 슬롯레스트릭터 저어널 베어링의 슬롯의 형상을 변화하는 방법을 이용하여 고속안정성이 우수한 또 다른 슬록의 형상을 제안하고 제안된 슬롯의 고속안정성을 해석하기로 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.4
• /
• pp.377-385
• /
• 2013

To identify the effects of an outflow area on pool boiling heat transfer in a vertical annulus, three different flow restrictors were studied experimentally. For the test, a heated tube of smooth stainless steel and water at atmospheric pressure were used. Both annuli with open and closed bottoms were considered. To validate the effects of the outflow area on the heat transfer, the results of the annulus with the restrictor were compared with the data for the plain annulus without the restrictor. The reduction of the outflow area ultimately results in a decrease in the heat transfer. As the outflow area is very small, a slight increase in heat transfer is also observed. The major cause of this tendency is explained as the difference in the intensity of liquid agitation cause by the movement of coalesced bubbles. It is identified that the convective flow, pulsating flow, and evaporative mechanism are considered as the important mechanisms.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1157-1161
• /
• 2003

A novel actuator with built-in the displacement and the thrust control function is presented in this paper. This actuator is a kind of compact hydraulic cylinder system which consists of a hydraulic cylinder, a spool, a sleeve, a mechanical feedback mechanism and a stepping motor. The displacement and thrust is in proportion to the rotational angle of stepping motor by the mechanical feedback. In order to investigate characteristics of this actuator, simulation study and preliminary experiments are conducted. Through the preliminary experiment this actuator is very effective in the control for displacement and thrust. Also, it became obvious that the stability of system can be adjusted by using the restrictor with the effect of velocity feedback. Furthermore, this paper explained that a flexible compliance control could be realized by adjusting the feedback weighting in the actuator.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.998-1002
• /
• 2003

This paper investigates the characteristics of stiffness and load in the thrust bearing of spindle which could be changeable according to the groove shape of inlet, in order to design a high-stiffness air bearing by selecting a optimal groove shape. In experiments, dead weight and displacement sensor are used to measure the load carrying capacity and the stiffness respectively. Various shapes and different depth of groove of self-restrictor are used as experimental conditions. Comparative study between the theoretical value and the practical one by measuring the value of stiffness and load of the thrust bearing is performed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.645-649
• /
• 1997

In case of swash plate type axial piston hydraulic motor, hydrostatic bearing used to achieve the lubrication effect on the mechanical sliding contact areas between the following parirs ; sliooer-pad and swash plate,piston and cylinder bore,valve plate and cylinder block, etc. This study discussed the basic charateristic for the hydrostatic slipper-pad bearings with the capillary or orifice restrictor under static load condition. And, we also development of hydrostatic bearing tester for hydrostatic balancing test of pistion & slipper-pad assembly, and some experimental data on supply pressure step responce are reported.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.249-254
• /
• 1992

Hydrostatic Bearings have been applied to ultra high precision machine tools and precision instruments, because of their low friction characteristic, high load carrying capacity and high moving accuracy at all range of speed. In regard to realizing the Hydrostatic Bearing, various restrictors such as capillary, orifice, diaphram valve, spool valve, and etc can be used. However, their stiffness and flexibility are not sufficient in practical use for ultra precision machine tool elements. In this study dynamic equations were derived and the dynamic characteristics were simulated for both orifice and flow control servo valve. Simulation was carried out on the condition that static and sinusoidal dynamic loads were applied to the table of CNC jig Boring machine. The simulation results indicate the improvement of the performance of the Bearing system when flow control servo valve has been used as restrictor of Hydrostatic Bearing.

• 한국기계연구소 소보
• /
• s.18
• /
• pp.21-27
• /
• 1988

In this study, a series of experiments and analyses are performed to estimate the static characteristics of hydrostatic journal bearing such as load capacity, pressure change in each recess, eccentricity of spindle, etc. The experiments are carried out for a multi-recess type journal bearing with capillary restrictor. The Finite Element Method(FEM) is used for the analyses. The predicted load capacity under the condition of stationary or eccentric ratio of bellow 0.2 of the spindle shows excellent agreement with the measured. But, with an increase of the eccentric ratio when the spindle is rotating, the predicted load capacity is largely estimated than the measured. It seems that the difference is mainly caused among others from the fact that the effect of oil-viscosity variation due to the temperature change in the bearing is not introduced into the analyses. The analysis method proposed to estimate the static characteristics of hydrostatic journal bearing is considered to be very reliable since the predicted results are overall in good agreement with the measured.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.4
• /
• pp.410-415
• /
• 2011

A cylindrical type of self-controlled restrictor is designed for hydrostatic bearing of crank shaft for a grinding wheel spindle. The effect of operation parameters, clearance between spindle and housing on bearing stiffness are analyzed to determine the optimum conditions of operation parameters. The lowest values of the supply pressure and the loads by the theoretical and experimental results assuming oil film thickness and shape of pocket are compared.

• Korean Journal of English Language and Linguistics
• /
• v.2 no.2
• /
• pp.279-285
• /
• 2002

English allows conjoined wh-questions to have two different readings. The English sentence Which person does John like and Mary admire\ulcorner involves ATB movement and is understood either as single questions requiring one set of individuals that are liked by John and admired by Mary (which person x, likes (j,x) & admires (m,x)) or as coordinated wh-questions, allowing distinct individuals that John likes and Mary admires (which person x, likes (j,x) & which person y, admires (m,y)). I argue this ambiguity is explained by the two key assumptions about wh-movement in Chomsky (1995): (1) Movement is copying. (2) wh-phrases consist of a wh-element and a nominal restrictor. This yields two possible LFs for English depending on whether [Wh+nominal] or wh alone is interpreted as a variable. It is therefore natural for me to propose that number of questions understood corresponds to the number of nominal segments at LF.

• Language and Information
• /
• v.19 no.2
• /
• pp.55-80
• /
• 2015

In this paper, I show how oyey 'except' and pakkey 'but' in Korean are semantically different from but/except in English. The exceptive oyey is attached only to a definite NP and shows no restriction on the NP that it is associated with. The referent of the NP is removed from either the restrictor, or nuclear scope, of the associated NP, also giving rise to two different inferences about the exception phrase. The inferences are based on the condition that an expression should make a non-trivial meaning contribution in a sentence. The complement of oyey is really taken to be an exception in one interpretation, but not in the other. The exceptive pakkey is assumed to be a NPI. It does not require a phrase that a pakkey-phrase is associated with. It can be attached to any type of phrases, including a NP. Attached to a full phrase, it is interpreted as a scalar item. Its core meaning contribution is to remove weaker alternatives from the scalar set locally. For a general interpretation, the other meanings are captured globally. A pakkey-phrase with a demonstrative has a conjunctive meaning, and it can be analyzed like oyey in one of the two interpretations.