Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Outflow Area on Pool Boiling in Vertical Annulus

출구유로 단면적이 수직 환상공간 내부의 풀비등에 미치는 영향

  • Received : 2012.09.06
  • Accepted : 2013.01.21
  • Published : 2013.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

To identify the effects of an outflow area on pool boiling heat transfer in a vertical annulus, three different flow restrictors were studied experimentally. For the test, a heated tube of smooth stainless steel and water at atmospheric pressure were used. Both annuli with open and closed bottoms were considered. To validate the effects of the outflow area on the heat transfer, the results of the annulus with the restrictor were compared with the data for the plain annulus without the restrictor. The reduction of the outflow area ultimately results in a decrease in the heat transfer. As the outflow area is very small, a slight increase in heat transfer is also observed. The major cause of this tendency is explained as the difference in the intensity of liquid agitation cause by the movement of coalesced bubbles. It is identified that the convective flow, pulsating flow, and evaporative mechanism are considered as the important mechanisms.

출구유로 단면적이 수직 환상공간 내부의 풀비등 열전달에 미치는 영향을 규명하기 위하여 세 가지 서로 다른 유동제한장치를 실험적으로 연구하였다. 가열 튜브는 매끈한 표면을 가지는 스테인리스강이며 대기압 상태 하에 있는 물을 사용하였다. 환상공간의 하부유로 조건은 개방과 폐쇄된 경우 두 가지를 모두 고려하였으며 유동제한장치를 설치한 환상공간에 대한 결과를 유동제한장치가 없는 환상공간에 대한 결과와 서로 비교하였다. 출구유로 단면적을 축소하는 것은 열전달의 감소를 초래하지만, 출구 유로가 아주 작은 경우 열전달계수가 증가하는 경우도 관찰되었다. 이러한 경향은 기포군집의 형성과 이동에 따른 액체교란의 차이로서 설명되며, 유동대류, 맥동류 발생, 기포 군집 하부의 미세층증발이 중요한 열전달 기구인 것으로 확인하였다.

Keywords

References

  1. Shoji, M., 2004, "Studies of Boiling Chaos: a Review," Int. J. Heat Mass Transfer, Vol. 47, pp. 1105-1128. https://doi.org/10.1016/j.ijheatmasstransfer.2003.09.024
  2. Gupta, A., Kumar, R. and Kumar, V., 2010, "Nucleate Pool Boiling Heat Transfer over a Bundle of Vertical Tubes," Int. Comm. Heat Mass Transfer, Vol. 37, pp. 178-181. https://doi.org/10.1016/j.icheatmasstransfer.2009.06.023
  3. Kang, M. G., 2010, "Effects of the Upper Inflow Area on Pool Boiling in a Vertical Annulus with Closed Bottoms," Journal of Mechanical Science and Technology, Vol. 24, pp. 2555-2560. https://doi.org/10.1007/s12206-010-0925-z
  4. Yao, S. C. and Chang, Y., 1983, "Pool Boiling Heat Transfer in a Confined Space," Int. J. Heat Mass Transfer, Vol. 26, pp. 841-848. https://doi.org/10.1016/S0017-9310(83)80108-2
  5. Bonjour, J. and Lallemand, M., 1998, "Flow Patterns During Boiling in a Narrow Space between Two Vertical Surfaces," Int. J. Multiphase Flow, Vol. 24, pp. 947-960. https://doi.org/10.1016/S0301-9322(98)00017-2
  6. Hung, Y. H. and Yao, S. C., 1985, "Pool Boiling Heat Transfer in Narrow Horizontal Annular Crevices, ASME J. Heat Transfer, Vol. 107, pp. 656-662. https://doi.org/10.1115/1.3247474
  7. Cornwell, K. and Houston, S. D., 1994, "Nucleate Pool Boiling on Horizontal Tubes: a Convection-based Correlation," Int. J. Heat Mass Transfer, Vol. 37, pp. 303-309.
  8. Kang, M. G., 2002, "Pool Boiling Heat Transfer in Vertical Annular Crevices," Int. J. Heat Mass Transfer, Vol. 45, pp. 3245-3249. https://doi.org/10.1016/S0017-9310(02)00040-6
  9. Fujita, Y., Ohta, H., Uchida, S. and Nishikawa, K., 1988, "Nucleate Boiling Heat Transfer and Critical Heat Flux in Narrow Space between Rectangular Spaces," Int. J. Heat Mass Transfer, Vol. 31, No. 2, pp. 229-239. https://doi.org/10.1016/0017-9310(88)90004-X
  10. Kang, M. G., 2009, "Pool Boiling Heat Transfer in a Vertical Annulus with a Narrower Upside Gap," Nuclear Engineering and Technology, Vol. 41, pp. 1285-1292. https://doi.org/10.5516/NET.2009.41.10.1285
  11. Park, K. N., Cho. Y. G., Lee, Y. S., Sim, B. S., Lee, J. M., Chi, D. Y., Park, S. K., Lee, H. H., Whang, D. K. and Lee, C. Y., 2005, "As-built Measurement of the In-pile Structure for the Installation of In-pile Test Section in HANARO," Transactions of the Korean Nuclear Society Autumn Meeting.
  12. Kang, M. G., 2011, "Pool Boiling Heat Transfer in a Vertical Annulus with a Stepped Outside Tube," Int. J. Heat Mass Transfer, Vol. 54, pp. 4817-4822. https://doi.org/10.1016/j.ijheatmasstransfer.2011.06.035
  13. Coleman, H. W. and Steele, W. G., 1999, Experimentation and Uncertainty Analysis for Engineers, 2nd Ed., John Wiley & Sons.
  14. Ginoux, J. J., 1978, Two-Phase Flows and Heat Transfer with Application to Nuclear Reactor Design Problems, Hemisphere Publishing Corporation.
  15. Kang, M. G., 2004, "Local Pool Boiling Coefficients on the Inside Surface of a Horizontal Tube," ASME, J. Heat Transfer, Vol. 126, pp. 638-641. https://doi.org/10.1115/1.1778190
  16. Holman, H. W., 1997, Heat Transfer, 8th ed., McGraw-Hill.