• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.157-162
• /
• 2012

A structural modification of baseframe is an effective method to avoid resonance in marine diesel generator (D/G) set which consists of diesel engine, generator and baseframe. However the reinforcement with thick plates or additional parts to increase the natural frequency can be less effective because of increased weight. Especially fine control of target mode based on the experience is difficult because the weight and interference of system have to be considered. In this paper, the design optimization of baseframe was performed to reduce the resonant vibration using a gradient descent method. The design parameters such as thickness, shape and location of baseframe parts are optimized to increase the torsional natural frequency of D/G set. From the actual test, the new designed baseframe reduced the vibration level in resonance by 55% without any increase of weight and interference. interference.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.159-168
• /
• 2005

Noise generated by the blunt trailing edge of lifting surfaces is investigated in this study using fluid structure interaction theory. First, through the eddy modeling, noise generation doe to the flow instability on the rigid trailing edge is surveyed. Then the behavior of elastic cantileverd beam is investigated. Parametric study based on various material properties is employed to analyze the motion of the beam. Moreover, each eigenmode approach of cantilevered beam is used to find when flow induced vibration is resonant. To analyze elastic behavior of cantilever beam efficiently, moving grid generation technique based on non-conservative form of Navier-Stokes equation is used. Equation of the motion associated with the cantilever beam is discretized by the Galerkin procedure with forced vibration. As a consequence, behavior of the elastic cantilevered beam is stable when the first mode natural frequency of the material is relatively higher than that of flow induced pressure fluctuation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.790-796
• /
• 2010

This paper designed the horn of half-wave needed for Ultrasonic meta) welding. The horn has to be designed and manufactured accurately, because measurements such as the shape, length, mass and etc. have effects on the resonant frequency and the vibration mode. Designed horn of half-wave has the feature of 40,000Hz of nature frequency, and maximizes vibration range in the Tip by resonance in the frequency of ultrasonic wave machine. In this study, we calculated and analyzed the natural frequency to find the optimal design of the horn that amplified the amplitude about double by the modal analysis and harmonic analysis using ANSYS. And we did FFT analysis of the manufactured horn.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.993-997
• /
• 1998

This paper presents a two-switch boost chopper with a sinewave current shaping and power factor correction scheme, which is applied for driving electronic ballast using high frequency resonant inverter. A working principle of the proposed one-converter type electronic ballast with power factor correction and active filtering schemes is described on the bases of the equivalent circuit of each operation mode, together with operation analysis. The steady-state performance evaluations of this electronic ballast are illustrated and discussed in experiment.

• Journal of Power Electronics
• /
• v.2 no.3
• /
• pp.206-211
• /
• 2002

Silent gas discharge method has been widely applied fur ozone production, ultraviolet light and UV laser generation. Since ozone and ultraviolet applications have tendency to spread widely in industry, the development of efficient and low - cost power supply for such systems is an important task at present. This paper introduces high-frequency inverter type mode power supply designed fur ozone generation tube and ultraviolet generation excimer lamp and considerations on the design of the inverter and pulse density modulation control strategy applied in it.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.423-427
• /
• 1998

A new single-switch, three-phase, high power factor, multi-resonant, ZCS buck rectifier that operates in the continuous conduction mode has been reported. Basically, pulse frequency modulation method should be adopted to suitably control the system. This paper puts main focus on the methods how the pulse frequency modulation can be implemented and a comprehensive investigation on the corresponding control loops is coducted.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.343-344
• /
• 2010

본 논문에서는 넓은 입출력 변동 범위를 가지는 LLC 공진형 직류-직류 변환기의 전류형 제어에 대해서 소개한다. 먼저, 전류형 제어의 개념과 목적을 설명하고 전류형 제어를 적용한 변환기를 소신호 해석을 이용해 전원단의 동특성을 확인한다. 그리고 동특성 해석을 바탕으로 전압 보상기 회로를 구성한 후, 변환기의 성능을 실험과 시뮬레이션을 통해 비교 및 검증한다. 마지막으로 전압형 제어를 이용한 변환기와 비교를 통해 전류형 제어의 우수성을 확인한다.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.243-246
• /
• 1990

The theory was analyzed and the computer program was developed for simulation about ceramic filter in the state of the one-strip electrode using the energy trapping effect. They were fabricated using the PZT-4 specimen. Each of the average differances of the resonant point and bandwidth between by the theoretical calculations and by experiment results was 5.6[%] and 3.72[%], and it is considered that this differance is originated from the high temperature and stress during the process that the ceramic filter was fabricated It is considered that the one-strip ceramic filter having a wanted characteristics and the lowest differance is fabricated easily by means of the simulation developed in this paper and the fabrication methods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.135-138
• /
• 2003

The circular cavity resonator which can measure the dielectric properties of dielectrics in the V-band($50GHz{\sim}75GHz$) frequency range was designed and fabricated. Exciting and detecting of the resonator is peformed by WR15 rectangular waveguides using Bethe's small hole coupling. The GaAs plate sample was used for the verification of the performance of the fabricated circular cavity resonator. In the measurement of GaAs single crystal using that resonator, the resonant frequency of the dominant $TE_{011}$ mode, the permittivity and $Q{\times}f_0$ were measured as 53.29GHz, 12.87 and 138,000, respectively.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.2
• /
• pp.54-61
• /
• 1994

본 논문에서는 종래의 전파모드 영전압 스위칭 다중공진형 콘버터의 문제점을 극복하기 위하여 전파모드 영전압 다중공진형 콘버터의 스위칭 조건 개선방법을 제안한다. 기존의 전파모드 영전압 다중공진형 콘버터는 능동스위치의 기생커패시턴스에 저장된 에너지로 인한 턴-온 손실이 있다. 그러므로 종래의 손실을 제거시키기 위하여 역전류 저지 다이오드와 병렬로 작은 커패시터를 첨가한 개선된 전파모드 영전압 스위칭 다중공진형 콘버터를 제안하였다. 개선된 스위칭 조건은 Buck형 영전압 스위칭 다중공진형 콘버터에 적용하였으며 실험 결과 이 개선된 콘버터는 능동 스위치의 실질적인 영전압 스위칭이 이루어졌으며 능동 스위치의 턴-온 손실을 제거할 수 있었다.