• 전기학회논문지P
• /
• 제64권3호
• /
• pp.146-152
• /
• 2015

In this paper, we propose a boost DC-DC converter using a modification of the passive auxiliary resonant snubber circuit with a DC-DC converter in a typical active auxiliary resonant snubber-bridge inverter. The proposed boost DC-DC converter is small compared to the DC-DC converter according to the soft-switching scheme that requires a general auxiliary switch by realizing the soft switching operation as a DC-DC converter which does not require an auxiliary switch. It is light-weight, switch the turn-on and turn-off switching loss at the time of the superposition of the voltage and current is extremely small, so small. And the reduction of the surge voltage and current of the switch. In addition, the proposed boost DC-DC converter has a high efficiency over a wide load characteristics change area than conventional hard switching PWM boost converter using an RC snubber loss.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.188-193
• /
• 2017

In this paper, a ZVS-PWM high-frequency inverter with a PWM control function is applied to commercial system 220[Vrms], and a resonator type ZVS-PWM high-frequency inverter circuit with a fixed-two methods were proposed. The parameters of the transformer model equivalent circuit of a copier fixing device, which is an essential element in the parameter optimization of the proposed circuit, are obtained by using a high-frequency amplifier and its frequency characteristics are described. The proposed method compared to the existing single-ended ZVS-PFM high frequency inverter can suppress the voltage and current peak value of the power semiconductor switching device and reduce the switching loss. The efficiency of the proposed method itself is 98[%] at rated power output. Also, the efficiency of 96[%] can be obtained even at low output, so that the proposed high frequency inverter is very efficient inverter. The total efficiency from the commercial AC input to the inverter output is 93[%] at rated, which is considered efficient for use in copying machines. In addition, the diode bridge loss accounts for the largest portion of the overall system efficiency distribution. On the other hand, the nonparallel filter has a very low loss.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.295-300
• /
• 2001

A variety of high voltage DC power supplies employing the high frequency inverter are difficult to achieve soft switching considering a quick response and no overshoot response under the wide load variation ranges which are used in medical-use x-ray high voltage generator from 20kV to 150kV in the output voltage and from 0.5mA to 1250mA, respectively. The authors develops soft switching high voltage DC power supply designed for x-ray power generator applications, which uses series resonant inverter circuit topology with a multistage voltage multiplier instead of a conventional high voltage diode rectifier connected to the second-side of a high-voltage transformer with a large turn ratio. A constant on-time dual mode frequency control scheme operating under a principle of zero-current soft switching commutation is described. Introducing the multistage voltage multiplier, the secondary transformer turn-numbers and stray capacitance of high-voltage transformer is effective to be greatly reduced. It is proved that the proposed high-voltage converter topology with dual mode frequency modulation mode control scheme is able to be the transient response and steady-state performance in high-voltage x-ray tube load. The effectiveness of this high voltage converter is evaluated and discussed on the basis of simulation analysis and observed data in experiment.

• Journal of Electrical Engineering and Technology
• /
• 제2권1호
• /
• pp.89-97
• /
• 2007

This paper presents a new circuit topology of active edge resonant snubbers assisted half-bridge soft switching PWM inverter type DC-DC high power converter for DC bus feeding power plants. The proposed DC-DC power converter is composed of a typical voltage source-fed half-bridge high frequency PWM inverter with a high frequency planar transformer link in addition to input DC busline side power semiconductor switching devices for PWM control scheme and parallel capacitive lossless snubbers. The operating principle of the new DC-DC converter treated here is described by using switching mode equivalent circuits, together with its unique features. All the active power switches in the half-bridge arms and input DC buslines can achieve ZCS turn-on and ZVS turn-off commutation transitions. The total turn-off switching losses of the power switches can be significantly reduced. As a result, a high switching frequency IGBTs can be actually selected in the frequency range of 60 kHz under the principle of soft switching. The performance evaluations of the experimental setup are illustrated practically. The effectiveness of this new converter topology is proved for such low voltage and large current DC-DC power supplies as DC bus feeding from a practical point of view.

• 전력전자학회논문지
• /
• 제8권2호
• /
• pp.116-127
• /
• 2003

본 논문에서는 UPS 인버터의 성능 개선을 위하여 출력측 LC 필터의 커패시터 전압과 전류의 2중 제어루프를 구성하고, 2중 제어루프에 디지털 제어시스템을 채택하였다 또한, 디지털 제어기의 연산지연시간을 보상하기 위하여 이러한 연산지연시간을 인버터 플랜트의 고유한 파라미터로 가정하고, 플랜트 모델에 포함시켜 모델링 하였다. UPS 인버터 출련전압의 과도상태 응답특실을 개선하고, 파라미터 변동에 강인한 특성을 얻기 위하여 2중 제어루프에서 내부 전류 제어루프는 내부 모델 제어기를 제안하였다. UPS 인버터 출력전압의 0의 정상상태 오차를 얻기 위하여 외부 전압 제어루프는 비례 제어기와 공진 제어기를 병렬로 연결한 비례-공진 진압제어기를 제안하였다.

• 조명전기설비학회논문지
• /
• 제19권3호
• /
• pp.10-16
• /
• 2005

본 논문에서는 퍼지 이득 조정기를 이용한 황전등 전원장치를 제안하고, 회로를 설계하고 제작을 통해 성능을 확인하였다. 직렬 공진 하프 브리지 인버터를 기본으로 하여 전원변동 및 출력 보상을 위한 PFM(Pulse Frequency Modulation), 영전압 스위칭, 소프트 스위칭, 소프트 스타트를 적용하고 퍼지 이득 조정 알고리즘을 통해 역률과 효율을 개선하여 마그네트론의 수명 연장 및 안정된 출력을 얻을 수 있도록 하였고, 기존의 고정 출력에서 $900\~1250[W]$ 연속 가변 출력이 가능하게 하였다. 제작된 전원장치는 전원 전압의 변동에 대하여 상용 전원 $220V{\pm}15[\%]$에서 안정적인 출력 특성과 광효율 97[1m/W], 역률 $96[\%]$로서 만족한 결과를 얻을 수 있었다.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.181-190
• /
• 2007

This paper presents a novel circuit topology of a DC bus line series switch and parallel snubbing capacitor-assisted soft-switching PWM full-bridge inverter type DC-DC power converter with a high frequency planar transformer link, which is newly developed for high performance arc welding machines in industry. The proposed DC-DC power converter circuit is based upon a voltage source-fed H type full-bridge soft-switching PWM inverter with a high frequency transformer. This DC-DC power converter has a single power semiconductor switching device in series with an input DC low side rail and loss less snubbing capacitor in parallel with the inverter bridge legs. All the active power switches in the full-bridge arms and DC bus line can achieve ZCS turn-on and ZVS turn-off transition commutation. Consequently, the total switching power losses occurred at turn-off switching transition of these power semiconductor devices; IGBTs can be reduced even in higher switching frequency bands ranging from 20 kHz to 100 kHz. The switching frequency of this DC-DC power converter using IGBT power modules can be realized at 60 kHz. It is proved experimentally by power loss analysis that the more the switching frequency increases, the more the proposed DC-DC power converter can achieve a higher control response performance and size miniaturization. The practical and inherent effectiveness of the new DC-DC converter topology proposed here is actually confirmed for low voltage and large current DC-DC power supplies (32V, 300A) for TIG arc welding applications in industry.

• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.27-34
• /
• 2004

본 논문에서는 half-bridge inverter를 이용하여 400[W] 고압나트륨 램프용 전자식 안정기를 설계하였다. 제안된 등가 LC 직렬 공진회로에서 인덕터와 커패시터의 값을 이론적으로 계산하고, LC 직렬 half-bridge 회로에 대한 IsSPICE 시뮬레이션을 수행하였다. 계산결과를 검증하기 위해 전자식 안정기를 설계 제작하여 실험을 수행하였다. 실험에 의한 전자식 안정기의 제반특성은 시뮬레이션 결과와 대단히 유사하였다. 실험결과 출력전압 400[W]에서 역률 99.3[%], 전류 전고조파 10.01[%], 램프효율 119[lm/W]의 좋은 성과를 나타내었다.

• 한국콘텐츠학회논문지
• /
• 제10권4호
• /
• pp.257-264
• /
• 2010

기존의 경두개 자극장치는 일정한 자극치료 펄스의 정현파 모양으로 다양한 치료 및 진단을 하는데 한계가 있다. 본 연구에서, 치료 및 진단마다 요구되는 세기, 폭, 펄스모양이 다른 코로로프트-월톤회로와 반파브리지 공진 인버터를 도입하여 주파수와 전압이 가변되는 새로운 장치를 제안하고자 한다. 기존장치 보다 많은 장점을 가진다. 첫째로 고압 변압기를 가지지 않는다. 둘째로 스위칭손실이 적고, 출력에너지를 정밀하게 제어할 수가 있다. 세째로 자극의 세기, 폭, 펄스모양이 다양하다. 결과적으로 변압기를 사용하지 않는 반파브리지 인버터와 코크로프트-월톤회로를 적용하여 개선된 특성과 실험을 구하였다.

• 전력전자학회논문지
• /
• 제22권5호
• /
• pp.440-448
• /
• 2017

This paper proposes a controller design of a distributed source inverter in stand-alone mode or grid-connected mode to compensate the current or voltage harmonics caused by local nonlinear load. The PR-based multi loop controller has been used to improve the dynamic performance of the system and to compensate the output voltage or grid current harmonics. The multi-loop controller consists of an outer current controller and an inner voltage controller for the output voltage control in stand-alone mode. In grid-connected mode, an outer current controller is added to the output voltage controller for the grid current control. The design performance of each controller is described through the Root locus and Bode plot of the transfer functions. The validity of the proposed control algorithm and design parameters has been verified through the PSiM simulation and experimental results.