• 대한치과보철학회지
• /
• 제41권3호
• /
• pp.360-368
• /
• 2003

Statement of Problem: The residual monomer of denture base materials causes hypersensitivity on oral mucosa and intereferes with the mechanical properties of the cured resin. The amount of residual monomer is influenced by materials, curing cycle, processing method, and etc. Purpose: The aim of this study was to investigate the residual methyl methacrylate(MMA) content of injection molded denture base polymer, and to compare this with the self-cured resin and the conventional compression molded heat-cured resin. Materials and Methods: Disc shaped test specimens (50mm in diameter and 3mm thick) were prepared in a conventional flasking technique with gypsum molding. One autopolymerized denture base resins (Vertex Sc. Dentimex. Netherlands) and two heat-cured denture base resins (Vertex RS. Dentimex. Netherlands, Ivocap. Ivoclar Vivadent, USA) were used. The three types of specimens were processed according to the manufacturer's instruction. After polymerization, all specimens were stored in the dark at room temperature for 7 days. There were 10 specimens in each of the test groups. 3-mm twist drills were used to obtain the resin samples and 650mg of the drilled sample were collected for each estimation. Gas chromatography (Agillent 6890 Plus Gas Chromatograph, Agillent Co, USA) was used to determine the residual MMA content of 10 test specimens of each three types of polymer. Results: The residual monomer content of injection molded denture base resins was $1.057{\pm}0.141%$. The residual monomer content of injection molded denture base resins was higher than that of compression molded heat cured resin ($0.867{\pm}0.169%$). However, there was no statistical significant difference between two groups (p>0.01). The level of residual monomer in self cured resin($3.675{\pm}0.791$) was higher than those of injection molded and compression molded heat cured resins (p<0.01). Conclusion: With respect to ISO specification pass / fail test (2.2% mass fraction) of residual monomer, injection molding technique($1.057{\pm}0.141%$) is a clinically useful and safe technique in terms of residual monomer.

• 한국식품영양학회지
• /
• 제24권4호
• /
• pp.496-500
• /
• 2011

The purpose of this investigation was to evaluate anti-tumor activity and detect what compounds affect its activity form $Alpinia$ $officinarum$ Hance. Two fractions, methanol and ethylacetate, were isolated by Amberlite XAD-2 resin column chromatography from methanol extract of the rhizomes of $Alpinia$ $officinarum$. In hollow fiber assay, the methanol extract and methanol fraction were found to inhibit the tumor growth against colon tumor cell lines such as Colo-320, HCT116 and WiDr. Three diarylheptanoids [5-hydroxy-1,7-diphenyl-3-heptanone, 5-hydroxy-7-(4"-hydroxy-3"-methoxyphenyl)-1-phenyl-3-heptanone and 3,5-dihydroxy-1,7-diphenylheptane] and two flavonoids [galangin and kaempheride] were isolated and identified from the methanol fraction, which is higher activity than ethylacetate fraction. Among these diarylheptanoids and flavonoids, 3,5-dihydroxy-1,7-diphenylheptane, galangin and kaempheride as active components on anti-tumor activity were mainly posited in methanol fraction.

• 암석학회지
• /
• 제24권4호
• /
• pp.365-371
• /
• 2015

희토류 원소는 암석의 분화과정을 연구하는데 있어서 매우 중요한 자료가 된다. 이 중 Sm, Nd은 암석의 연대측정 및 지각의 진화 연구 등 지구화학적 연구 분야에 유용하게 사용되어지는 원소로, 이를 위해선 고순도 원소 분리가 필수적이다. 그러나 Nd 분리를 위해 널리 사용되고 있는 란탄 레진과 0.25M HCl을 이용한 원소 분리법을 이용할 경우, Ce을 완전히 제거할 수 없었다. 따라서 이 기술보고에서는 Nd을 분리해 내는데 있어서 란탄 레진법을 이용할 경우, 용리액 농도를 0.25M HCl보다 더 희석시킨 0.15M HCl로 변화시켰을 때 Nd과 Ce의 분리가 더 효율적인 지를 비교 검토하고자 하였다. 그 결과, 0.15M HCl의 경우 0.25 M HCl 보다 용리액을 다량으로 사용하면서도 Ce과 Nd의 분리에 있어서는 효과적이지 않았다. 이는 란탄 레진법에서 용리액의 농도를 낮추어도 Nd의 분리 효율이 더 증가되지 않음을 의미한다.

• Composites Research
• /
• 제27권1호
• /
• pp.31-36
• /
• 2014

본 연구에서는 고압 RTM 공정에서 고속 수지 유동에 의한 섬유 보강재의 변형 거동에 관한 연구를 진행하였다. 이를 위해 섬유와 금형의 마찰계수 측정 장치와 고압 RTM 공정을 모사하여 preform 변형을 평가하는 장치를 구축하였다. 마찰계수 측정 장치를 통해 금형-섬유 간 Coulomb 마찰계수와 수력학적 마찰 계수를 측정하였고, preform 변형 평가 장치를 통해 preform의 변형이 발생할 때의 유체에 의해 작용하는 외력의 힘을 측정하였다. 마찰계수를 이용하여 마찰력을 구하고 외력과 비교하여 직물의 슬립(slip) 여부를 판별할 수 있었다. 유체에 의해 섬유에 작용하는 외력이 섬유와 금형 사이의 마찰력보다 커지게 되면 직물이 움직이는 것으로 관찰 되었으며, 이는 섬유의 체적률과 마찰계수에 주로 영향을 받는 것으로 나타났다.

• 공업화학
• /
• 제3권2호
• /
• pp.318-326
• /
• 1992

분자량 350~360을 가진 비스페놀형 에폭시 수지(DER 331)를 전체 에폭시 성분 중 50% 이내의 범위에서 분자량 1,000~1,600을 가진 비스페놀형 에폭시수지(DER 662, 664) 및 분자량 800~1,000을 가진 노블락형 에폭시수지(DEN 439)와 혼합 사용하여 합성한 비닐에스테르수지의 액상 및 경화물성을 연구하였다. 희석점도는 분자량과 용해성의 영향을 받았으며 저분자량의 함량이 늘어날수록 낮아졌다. 경화시간은 MAA의 양에 영향을 받았으며 저분자량의 함량이 늘어날수록 비스페놀형은 빨라졌고 노블락형은 변화를 보이지 않았다. 경도와 신율은 분자구조의 영향을 받았으며 저분자량의 함량이 늘어날수록 떨어졌다. 굴곡강도와 인장강도는 DER 331 함량 30~40%에서 가장 우수했다.

• 환경위생공학
• /
• 제22권4호
• /
• pp.23-32
• /
• 2007

Changes in the characteristics of dissolved organic matter was studied at selected stations in the Nakdong river basin using physical and chemical methods. Characteristics of dissolved organic matters were analysed and assessed. Production of disinfection byproducts were also investigated. Distribution of the organic compounds according to the Molecular weight(MW) indicate that MWs higher than 100K were highest with cattle excrement wastewater and MW between 100-10K were highest with waters from forest streams. Low MW compounds (Jess than 1K) were highest with the effluents from environmental facilities. Results of resin fractionation study show that acidic hydrophobic substances(AHS) were dominant in many stations. The values were higher in the samples from mainstreams and sidestreams where the influence of organic matter is higher than the water from environmental facilities. Hydrophilic neutral substances(HoN) such as hydrocarbon, pesticides and detergents were higher in the wastewater treatment facilities. HoN values of water from the forest streams were 4.7% indicating there is no synthetic pollutant.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.165-173
• /
• 2003

As the cycling time of new products have become more and more short in recent years, the demand for lowering the cost and reducing the production time becomes stronger. In order for the demand, the rapid prototyping and rapid tooling technology have been used. It has been widely known that RP technology has advantages with fabricating 3-D object having a complicated geometric shape. RP products, however, have a limitation with applying to the real die and mold because soft materials such as resin, paper and wax has been mostly used in RP technology. So in this paper, the RP products have been copied to semi-metallic soft tools using the mixture of metal fillers and epoxy resin. In order to evaluate the effect of the fillers on the characteristics of semi-metallic soft tools, three fillers are used including commercial aluminum powder, cast iron powder recycled by machining chips, and aluminum short fiber made by self-excited vibration technique. Besides, in the case of aluminum powder, the change of characteristics of semi-metallic soft tools is also tested according to the volume fraction of the powder.

• 접착 및 계면
• /
• 제15권3호
• /
• pp.109-115
• /
• 2014

본 연구에서는 내부에 이소시아네이트를 포함하는 microcapsule을 합성하였으며, 제조된 microcapsule에 대한 분석 및 폴리우레탄 수지와 병용했을 때의 기계적 물성과 접착특성에 대해서 고찰하였다. 전자현미경을 사용해서 합성된 microcapsule이 구형의 외관을 갖는 것을 확인하였으며, FT-IR과 TGA 분석을 통해서 microcapsule의 core 물질이 IPDI인 것과 각 구성요소들의 성분비를 확인하였다. 폴리우레탄 수지 자체 및 microcapsule을 포함한 경우의 접착력 및 물성을 평가한 결과 접착수지 내에 포함된 microcapsule 내 IPDI의 가교반응에 의해서 폴리우레탄 수지 자체에 비해 접착력, 인장강도, 내마모 특성이 크게 향상되는 것을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3617-3627
• /
• 2023

This study presents a method to solidify spent ion-exchange resin (IER) in a metakaolin-based geopolymer and shows results of mechanical strength, immersion, leaching, irradiation, and thermal cycling tests for waste acceptance criteria (WAC) to repository. The geopolymer waste form with 20 wt% of simulated spent IER met the WAC in South Korea (ROK), and the leaching tests of various sized-waste forms up to 15.0 × 30.0 cm and waste loadings up to 20 wt% for 1-5 d and 1-90 d achieved a leachability index, L_i > 6. In a leaching test for 5 d, the cumulative fraction leached (CFL) for Cs, which leached the most, was linearly correlated with the square root of leaching time for all waste forms, and L_i increased as the size of the waste form increased. The CFL was also correlated with elapsed time in the 90 d leaching test. The correlations among CFL, time, and volume-to-surface area ratio of waste forms used to estimate the L_i of Cs of a 200-L sized geopolymer with 15 wt% IER showed the L_i values as 14.73 (5 d) and 17.71 (90 d), respectively, indicating that the large-sized geopolymer waste form met the WAC.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1990년도 추계학술대회
• /
• pp.64-67
• /
• 1990

Bending strength, bending elastic modulus ,and fracture toughness of different types of dental composite resins were deter mined. The relationship between bending strength, fracture toughness and filler volume fraction of dental composite resin was understood. In Acoustic Emission(AE) behavior during fracture toughness test, characteristic generation patterns of each type were understood. The fracture toughness values, AE generation patterns, and the nature of fracture surface were analyzed to understand fracture behavior of dental composite resin.