• The Korean Journal of Pesticide Science
• /
• v.19 no.2
• /
• pp.81-87
• /
• 2015

The present study was aimed to predict the pre-harvest residue limits (PHRLs) of pyrimethanil (fungicide) and methoxyfenozide (insecticide) in grape, and to estimate their biological half-lives and residual characteristics. The pesticides were sprayed once on grape in two different fields 10 days before harvest. At the end of 0, 1, 2, 3, 5, 7 and 10 days after application, samples were harvested for further analysis. The residual pesticides were extracted with acetonitrile and partitioned with dichloromethane, and the high-performance liquid chromatography with diode array detector (HPLC/DAD) was employed for the residue analysis. The results obtained in the present study show that the limit of detection of both pesticides were found to be $0.01mg\;kg^{-1}$. The recoveries of these pesticides were ranged between 80.6% and 102.5% with coefficient of variation lower than 10%. The biological half-lives of both pesticides were observed in field 1 and field 2 which shows 7.7 and 7.4 days for pyrimethanil and 5.1 and 6.1 days for methoxyfenozide, respectively. Further, the PHRL of pyrimethanil and methoxyfenozide was found to be $8.90mg\;kg^{-1}$ and $5.51mg\;kg^{-1}$, respectively at 10 days before harvest. Consequently, the present study suggests that the residual amounts of both pesticides will be lower than the maximum residue limits (MRLs) when grape is harvested.

• The Korean Journal of Pesticide Science
• /
• v.19 no.4
• /
• pp.361-369
• /
• 2015

This study investigated residual characteristics of bistrifluron and fluopicolide in Korean cabbage, and suggested the pre-harvest residue limits (PHRLs) based on their dissipation patterns and biological half-lives. The pesticides were sprayed on Korean cabbage in two different region under greenhouse conditions at the recommended dose, respectively. The samples for residue analysis were harvested at 0 (2 hr), 1, 2, 4, 6, 8 and 10 days after treatment, and analyzed by HPLC after clean-up with Florisil SPE. The limit of quantification (LOQ) was $0.03mg\;kg^{-1}$ for bistrifluron and fluopicolide, and the recoveries ranged from 87.2-110.6% with below 5% of RSD. The biological half-lives of field I and field II were 3.9 and 4.2 days for bistrifluron and 4.9 and 4.2 days for fluopicolide, respectively. The PHRL of bistrifluron and fluopicolide were recommended as 3.83 and $3.23mg\;kg^{-1}$ for 10 days before harvest, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.1
• /
• pp.1-11
• /
• 2013

In this study, we investigated chemical characteristics of solid residues obtained from inorganic acid hydrolysis of hybrid poplar (Populus alba ${\times}$ glandulosa). Different concentration (72, 36, 18%) of sulfuric acid and hydrochloric acid were used for first hydrolysis step and second hydrolysis step were carried out after equally dilution to 4%. Solid residues after consecutive two step hydrolysis were named to RS72 (Residue from Sulfuric acid 72%), RS36, RS18, as well as RC36 (Residue from hydroChloric acid 36%) and RC18, respectively. The yield of RS decreased from 71.2% to 21.4% with increasing sulfuric acid concentration in the first hydrolysis step, whereas that of RC showed little difference (67.0% to 65.0%), irrespective of hydrochloric acid concentration. The lignin content in solid residue was 23.6% for both of RS36 and RS18, 25.6% for RC36 and 27.3% for RC18, respectively. The results of pyrolyzer-GC/MS showed that 24 cellulose derivatives (Levoglucosan, Furfural) and 21 lignin derivatives (Guaiacol, Syringol) were detected. Thermogravimetric analysis indicated that the yield of char increased and maximum wieght loss rate decreased with increasing lignin portion of solid residue. Therefore, structure of lignin was condensed effectively by sulfuric acid and by high concentration of acid.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.308-314
• /
• 2012

In order to monitor the residual pesticides in environment friendly agricultural commodities, fruits and fruiting vegetables. Twenty-five agricultural commodities were collected twice in May and August 2011 from nine environment friendly agricultural commodities-selling supermarkets and retail stores located in eight major cities in Korea. The number of each agricultural commodity collected, 555 samples in total, was 152 organic agricultural products, 202 pesticide-free agricultural products and 201 low-pesticide agricultural products. Pesticide residues in samples were analyzed by multiresidue method for 245 pesticides using a GC-ECD/NPD and an HPLC-DAD/FLD and the peaks suspected as pesticides were identified with a GC/MSD. As a result of pesticide residue analysis, three pesticides, bifenthrin, EPN and chlorpyrifos, were detected from four samples including apple, representing a detection rate of 0.72%. The residue levels of the four pesticide-detected samples were less than their maximum residue limits (MRLs) but one pesticide EPN detected from pear exceeded its legible criterion of one twentieth MRL. Estimated daily intakes of the pesticides detected from fruits and fruiting vegetables were less than 0.76% of their maximum permissible intake.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.860-865
• /
• 1995

This study was conducted to extract and isolate the polysaccharides from buckwheat. Also the sugar composition of the polysaccharides was investigated. The soluble and indigestible polysaccharides were isolated from supernatant and residue after enzyme treatment of raw, roast and steam buckwheat. The yields of low molecular weight soluble polysaccharides(LMS-P: MW<10 Kda) and high molecular weight soluble polysaccharides(HMS-P: MW>10 Kda) were $74.9{\sim}84.2%$ and $5.5{\sim}9.4%$, respectively. The yields of indigestible polysaccharides were low molecular weight insoluble polysaccharides; $0.8{\sim}4.2%$, crude hemicellulose; $3.2{\sim}9.6%$, alcohol insoluble hemicellulose; $0.9{\sim}1.7%$, residue; $2.0{\sim}2.4%$, respectively. The free sugars were detected in the soluble polysaccharides and low molecular weight insoluble polysaccharides but were not detected in the crude hemicellulose, alcohol insoluble hemicellulose and residue. The protein of all fraction were detected and the content was $1.0{\sim}18.9%$. The main sugar of soluble polysaccharides was glucose and the indigestible polysaccharides were composed of glucose, arabinose, rhamnose, xylose, mannose and galactose.

• The Korea Journal of Herbology
• /
• v.20 no.4
• /
• pp.133-140
• /
• 2005

Objectives : We have been used many herbal medicines after processing to improve the effect, decrease toxicity and side-effect, and change property. We have studied the physico-chemical change and HPLC pattern of Morindae Radix by means of processing method. Methods : This study was investigated the contents of loss on drying, residue on ignition, residue on acid insoluble ignition, 50% ethanol extract and HPLC pattern of Morindae Radix(Morinda officinalis How.) by processed and non-processed. We have conducted Morindae Radix and Damnacanthi Radix which is circulated in herbal medicine market by forgery. Processed Morindae Radix was prepared by heating of added to salt(SP), liquor(LP) and Glycyrrhizae Radix solution(GP) for 20-40 minutes. Results and Conclusions : From this analysis, we found that the content of 50% ethanol extract was increased by processing method. And we were detected distinguishable marker of processed and non-processed from Morindae Radix(Morinda officinalis How.) by HPLC pattern analysis.

• The Korea Journal of Herbology
• /
• v.21 no.4
• /
• pp.37-41
• /
• 2006

Objectives : This study has been conducted to investigate the amount of residual pesticide in herbal medicine of Osterici Radix which are purchased on Kwangju(Hanyaksarang). Methods : In order to analyze many pesticides in Osterici Radix, simultaneous multi-residue analysis of pesticides by GC-ECD/NFD was used. Results : But the amount of residual pesticide in Osterici Radix, simultaneous multi-residue analysis of pesticides by GC-ECD/NFD was used. Conclusion : These results indicate that Osterici Radix in current has safety. In future, it is considered the results of this study will be furnished the basis to succeeding studies and it is needed to extensive comparative study for the same genus-degree of relatedness.

• Journal of Biosystems Engineering
• /
• v.32 no.2 s.121
• /
• pp.121-129
• /
• 2007

This study was conducted to elucidate extraction efficiency by microwave technique in comparison with sonication technique for extraction of insecticide residue in pear. In the analysis of the extraction efficiency of microwave for a pear spiked with imidacloprid, the extraction efficiency by microwave power of 300 W with extraction temperature of $80^{\circ}C$, heating time of 1 to 3 minute was shown to be similar with the extraction time 20 minutes by sonication. The optimal condition. in consideration of economical condition and treatment time, for microwave extraction of imidacloprid in the pear were 300 watts of power supply, $100^{\circ}C$ of extraction temperature, 1 minute of heating time and 10 mL of acetone volume. A new microwave vessel was developed to rapidly process the sample of the insecticide imidacloprid residues in the pear. This vessel was designed to include a reaction chamber and a filtration equipment, and a gathering chamber. The system could curtail a pretreatment time to 21 minutes than sonication and 7.9 minutes than the previous microwave vessel.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.4
• /
• pp.251-257
• /
• 2004

Analytical methods were developed to determine cyclosulfamuron residues in soil, water, rice grain and straw using high-performance liquid chromatography (HPLC) with ultraviolet absorption detection. In these methods, cyclosulfamuron was extracted with aqueous $Na_2HPO_4$/acetone and acetone/methanol mixture from soil and rice samples respectively. Liquid-liquid partition coupled with ion-associated technique, Florisil column chromatography, and solid-phase extraction (SPE) were used to separate cyclosulfamuron from interfering co-extractives prior to HPLC analysis. For water sample, the residue was enriched in $C_{18}$-SPE cartridge, cleaned up in situ, and directly subjected to HPLC. Reverse-phase HPLC under ion-suppression was successfully applied to determine cyclo-sulfamuron in sample extracts with the detection at its ${\lambda}_{max}$ (254 nm). Recoveries from fortified samples averaged $87.8{\pm}7.1%$ (n=12), $97.3{\pm}7.2%$ (n=12), $90.8{\pm}6.6%$ (n=6), and $78.5{\pm}6.7%$ (n=6) for soil, water, rice grain and straw, respectively. Detection limits of the methods were 0.004 mg/kg, 0.001 mg/L, 0.01 mg/kg and 0.02 mg/kg for soil, water, rice grain and straw samples, respectively.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.113-119
• /
• 2014

Due to the development of the petroleum refining technology and continuously increased demand from markets, a quantity of gasoline and diesel oil produced from a restricted quantity of crude oil has been increasing, and residual fuel to be used at marine diesel engines has been gradually becoming low quality. As a result, it was recently reported that trouble oils which cause abnormal combustion such as knocking with extreme noise and misfire from internal combustion engines were increasing throughout the world. In this study, an author investigated ignitability and combustion quality by using combustion analyzer with constant volume(FCA, Fuel Combustion Analyzer) and middle speed diesel engine about MDO(Marine Diesel Oil), HFO(Heavy Fuel Oil), LCO(Light Cycle Oil) and Blend-HFO which was blended LCO of 1000 liters with HFO of 600 liters. Moreover, for betterment of ignitability and combustion quality of injected fuels, multi-injection experiment was carried out in the diesel engine using Blend-HFO. According to the results of FCA analysis, ignitability and combustion quality was bad in the order of MDO