• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.06a
• /
• pp.139-140
• /
• 2018

본 논문에서는 열화상 카메라를 사용하는 손가락 인터페이스와 손을 사용하지 않는 인터페이스 연구에서 표면 재질에 따른 잔류 열 생성 차이를 비교하고 분석하고자 한다. 열화상 카메라를 사용하는 인터페이스는 사용자가 프로젝터의 투사 스크린으로 사용되는 표면에 잔류 열을 생성하면 그 잔류 열의 형상을 검출하여 상호작용 할 수 있도록 한다. 스크린으로 사용되는 표면은 활용되는 장소에 따라 표면의 재질이 다를 수 있다. 따라서 일상 환경에서 프로젝터의 투사 스크린으로 사용이 가능한 표면 재질에 따라 다양한 방법으로 잔류 열을 생성하고 잔류 열에 대한 분석이 필요하다. 본 논문에서는 스크린으로 사용될 수 있는 다양한 표면 재질을 선택하여 세 가지 방법으로 잔류 열을 생성하고 열화상 카메라로 촬영한 영상을 분석하였다.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.71-76
• /
• 2022

We evaluated and developed a 6th generation large-size polisher in the type of face-up and Oscar. We removed the hillocks of the low temperature poly-silicon (LTPS) thin film with this polisher. The surface roughness of LTPS was lowered from 7.9 nm to 0.6 nm after CMP(chemical mechanical polishing). The thickness of the LTPS is measured through reflectance in real time during polishing, and the polishing process is completed according to this thickness. The within glass non-uniformity (WIGNU) was 6.2% and the glass-to-glass non-uniformity (GTGNU) was 2.5%, targeting the LTPS thickness of 400Å. In addition, the residual slurry after the CMP process was removed through the Core Flow PVA Brush and alkaline chemical.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.705-713
• /
• 2011

In this paper, we introduce two techniques for resolving integer ambiguities between reference stations, which is one of the most important processes in Network RTK correction generation process. Each techniques uses Hatch filter and combination of L1/L2 measurements and we used simulation data and real data to evaluate performance of the techniques. For evaluating performance of each technique, we compared corrections generated from user site and Network RTK. As a result, Network RTK with the technique which uses Hatch filter improves user performance much more than single baseline RTK does. Residual of user is smaller than a half size of wavelength so it does not affect user integer ambiguity resolution, however, it contains significant bias error. On the other hand, when we used the technique which uses combination of L1/L2 measurements, residual error of user is largely reduced compared to the technique using Hatch filter.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.4
• /
• pp.67-76
• /
• 2012

Expanding services and productions for screen content videos recently, necessity of new compression techniques is emerging. The next-generation video coding standard is also considering specified coding tools for screen content videos, but it is still preliminary stage. In this paper, we investigate the characteristics of screen content videos for which we propose the quantization in spatial domain to improve coding efficiency. The proposed method directly employs quantization for residual signal without any transformations. The proposed method also applies adaptive coefficients prediction and in-loop filter for quantized residual signals in spatial domain based on the characteristics of screen content videos. As a results, the proposed method for the random access, the low-delay and the all-intra modes achieve bit-saving about 4.4%, 5.1%. and 4.9%, respectively.

• Korean Journal of Poultry Science
• /
• v.9 no.1
• /
• pp.35-42
• /
• 1982

Data pertaining to the first generation of a Synthetic White Leghorn flock were used to estimate the heritabilities of and genetic correlation between partial egg production(egg number or percentage) or diversely segmented part records and other traits such as age at sexual maturity, residual and annual egg production, and to compare the expected genetic gain from selection on partial egg number or partial percent production with correlated response in other traits. The estimated heritabilites for six measures of egg Production were ranged from 29 to 35, while heritability for age at sexual maturity (SM) was intermediate (48). Genetic correlations between partial egg number (P) and annual egg number. (A), and partial percent production (P') and annual percent production (A') were 51 and 72, respectively. Genetic correlation between P and SM was estimated largely negative (-.64), while correlation bettween P' and SM was positively intermediate(34). In comparing direct response from selection on partial production (P or P') with another response in correlated trait, selection on P would be 25% more efficient than selection of P' for improving A, while selection of P' would be 94% more efficient than selection P for improving A' For shortening SM selection of P would be 98% more efficient than selection on P'.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.8
• /
• pp.33-44
• /
• 2000

The lightning with high voltage and current can enter the basestations for mobile communication through their antenna. The device which can protect the basestation against the lightning, is surge arrestor. In this paper, the concept, kind, operating mechanism, design and fabrication of surge arrestor were studied. Based on the studied data, variable surge arrestors were designed for the current mobile communication service like a cellular, GSM and PCS and the next generation mobile communication like a IMT-2000. Computer simulation for the prediction of their characteristics and inner structure optimization for the improvement of their electrical characteristics were carried with high frequency 3D structure simulator. Quarter wave short stub surge arrestors for IMT-2000 were fabricated with their final design and then the measurement of electrical characteristics and the lightning test were executed. As a results of measurement, we obtained below 1.05 of VSWR, -0.035 dB of insertion loss, -150 dBc of intermodulation and 7∼ll V of residual voltage.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.1
• /
• pp.55-60
• /
• 2021

This paper relates with the performance evaluation of QE-MMA (Quantized Error-MMA) adaptive equalization algorithm based on the stepsize and quantizer bit number in order to reduce the intersymbol interference due to nonlinear distortion occurred in the time dispersive channel. The QE-MMA was proposed using the power-of-two arithmetic for the H/W implementation easiness substitutes the multiplication and addition into the shift and addition in the tap coefficient updates process that modifies the SE-MMA which use the high-order statistics of transmitted signal and sign of error signal. But it has different adaptive equalization performance by the step size and quantizer bit number for obtain the sign of error in the generation of error signal in QE-MMA, and it was confirmed by computer simulation. As a simulation, it was confirmed that the convergence speed for reaching steady state depend on stepsize and the residual quantities after steady state depend on the quantizer bit number in the QE-MMA adaptive equalization algorithm performance.

• Restorative Dentistry and Endodontics
• /
• v.48 no.1
• /
• pp.10.1-10.9
• /
• 2023

Objectives: This study compared the buckling resistance of 3 nickel-titanium (NiTi) retreatment file systems and the torque/force generated during retreatment. Materials and Methods: The buckling resistance was compared among the D-RaCe (DR2), HyFlex Remover, and Mtwo R25/05 retreatment systems. J-shaped canals within resin blocks were prepared with ProTaper NEXT X3 and obturated by the single-cone technique with AH Plus. After 4 weeks, 4 mm of gutta-percha in the coronal aspect was removed with Gates-Glidden drills. Retreatment was then performed using DR1 (size 30, 10% taper) followed by DR2 (size 25, 4% taper), HyFlex Remover (size 30, 7% taper), or Mtrwo R25/05 (size 25, 5% taper) (15 specimens in each group). Further apical preparation was performed with WaveOne Gold Primary. The clockwise torque and upward force generated during retreatment were recorded. After retreatment, resin blocks were examined using stereomicroscopy, and the percentage of residual filling material in the canal area was calculated. Data were analyzed using 1-way analysis of variance with the Tukey test. Results: The HyFlex Remover files exhibited the greatest buckling resistance (p < 0.05), followed by the Mtwo R25/05. The HyFlex Remover and Mtwo R25/05 files generated the highest maximum clockwise torque and upward force, respectively (p < 0.05). The DR1 and DR2 files generated the least upward force and torque (p < 0.05). The percentage of residual filling material after retreatment was not significantly different between file systems (p > 0.05). Conclusions: NiTi retreatment instruments with higher buckling resistance generated greater clockwise torque and upward force.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.412-417
• /
• 2022

In this paper, multi-GNSS network RTK MAC correction generation software developed based on MATLAB GUI is introduced. The software was developed as a post-processing software based on simulation data to evaluate the feasibility of an algorithm for generating correction for multi-GNSS including GPS, GLONASS, and Galileo. As a result of software operation, network RTK correction for each system of multi-GNSS is output in MATLAB file format. In this paper, to evaluate the performance of the developed software, the residual error was analyzed after applying the correction generated through the software to the user. As a result of the analysis, it was confirmed that effective network RTK correction could be generated by confirming that the residual errors of users were maintained at 10 cm or less.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.1
• /
• pp.44-50
• /
• 2009

While American acoustics had been lagged behind European one in the nineteenth century, Alfred Mayer greatly contributed to enhance American experimental acoustics. He inherited experimental skills in collaboration with Koenig in Paris, and got chances to obtain research ability from leading researchers such as Rayleigh during his visit to England. His accomplishments, which brought him fame in Europe, included the creation of the acoustic pyrometer which measured the high temperature by means of the thermal change of the sound velocity, the discovery of mosquito's hearing by selective resonance, the formalization of the duration of the residual sensation of sound, the invention of the topophone which searched for the direction of the sound source, the construction of the apparatus for visualizing the frequency of sound and so on. He not only added new research results to Europe's acoustics but applied acoustics to physical education to help produce the next generation of American acousticians.