• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1598-1601
• /
• 2008

We describe the fabrication of transparent conducting single-walled carbon nanotubes (SWCNTs) film on flexible substrate following the conventional spin coating method. The fabricated film was post treated with diluted acid solution and its electrical and optical characterizations were performed. The electrical conductivity of SWCNTs film was enhanced and the film was found to be attached strongly with substrate after the post treatment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1271-1274
• /
• 2006

Integrated a-Si:H gate driver with high reliability has been designed and simulated. The proposed a-S:H gate driver has only one reset transistor under AC driving for P and output node. These reset transistors show much less degradation than those under DC driving. The simulation results show that the lifetime and response time are improved significantly compared with those of the prior circuit.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1432-1435
• /
• 2006

We report on carbon nano-fibers (CNFs) for applying to epoxy as a highly thermal conductive adhesive. In order to fabricate CNFs, electro-spinning process was performed with polyacrylonitrile (PAN) solutions. The sample was stabilized at the annealing temperature of $360^{\circ}C$, and carbonized from 900 to $1100^{\circ}C$. It is shown that the synthesized CNFs have a good thermal conductivity of several hundred W/m K. LED backlight units (BLUs) fabricated with MPCB using CNF-mixed epoxy give a better heat dissipation and higher performance than normal LED BLUs. On the basis of SEM, XRD, and FTIR, the characteristics of CNFs are described.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.620-624
• /
• 2007

Recently, Gonzalez-Audicana et al. proposed the substitute wavelet intensity (SWI) method which provided a solution based on the intensity-hue-saturation (IHS) method for the fusing of panchromatic (PAN) and multispectral (MS) images. Although the spectral quality of the fused MS images is enhanced, this method is not efficient enough to quickly merge massive volumes of data from satellite. To overcome this problem, we introduce a new SWI method based on a fast IHS transform to implement efficiently as an alternative procedure. In addition, we show that the method is well applicable for fusing IKONOS PAN with MS images.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.4
• /
• pp.27-31
• /
• 2002

Thin film diode with reliable interfacial structure was fabricated by using multi-step anodic oxidation. The thickness of the oxide layer was preciously controlled with anodic voltage. Also, interfacial structure between oxide layer and top electrode was improved by applying post heat-treatment. The thin film diode showed symmetric and stable I-V characteristics after the post heat-treatment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.522-525
• /
• 2002

본 논문에서는 고휘도 LCD 백라이트 유닛에 사용되는 직하방식 백라이트 제조 방법을 이용하여 저전력, 고휘도, 경박 단소의 광고용 사인보드를 설계 제작하였다. 광학 시뮬레이션을 이용하여 램프의 배치 등 을 설계하였으며. 최고 16개의 냉음극관 램프를 구동할 수 있는 인버터를 설계 제작하였다. 크기 $500mm{\times}400mm$의 광고판의 경우 두께는 35mm 이었으며 휘도는 15,000lux이었다.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1221-1222
• /
• 2006

태양전지는 일사량에 따라 그 출력특성이 변화하기 때문에 태양전지로 부터 최대출력을 얻기 위해서는 컨버터에 의한 최대 전력점 추종제어가 필요하다. 본 연구에서는 태양광 발전시스템의 최대전력추종을 위해 퍼지 이론을 도입한 퍼지제어기를 설계하였다. 그리고 퍼지제어기의 디지털 설계를 위해 태양광 발전시스템의 각 부분을 구성하고, 마이크로프로세서와 FPGA의 두가지 방식으로 제어기를 구현하였다. 또한 구현된 두 가지 방식의 퍼지제어기에 대해 실험을 통하여 비교분석 하였다.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.2
• /
• pp.29-33
• /
• 2008

LCD panels are increasingly used to show moving image material, for example in LCD television sets. However, moving images become blurred on LCD panels. One of the causes of motion blur is the slow reaction of LC(liquid crystal) cell to change in the pixel value. Another cause of motion blur is the hold-type characteristic of the LCD panel, during the frame time the image is shown continuously. This type of motion blur can be reduced with a scanning backlight. We have designed and fabricated a scanning backlight system that solves the hold-type characteristic problem in a way that Flat fluorescent lamp divided 6 blocks was scanned 60Hz.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.857-860
• /
• 1993

In this paper, we apply the self generating neuro fuzzy model (SGNFM) to the dimension analysis of the chaotic time series. Firstly, we formulate a nonlinear time series identification problem with nonlinear autoregressive (NARMAX) model. Secondly, we propose an identification algorithm using SGNFM. We apply this method to the estimation of embedding dimension for chaotic time series, since the embedding dimension plays an essential role for the identification and the prediction of chaotic time series. In this estimation method, identification problems with gradually increasing embedding dimension are solved, and the identified result is used for computing correlation coefficients between the predicted time series and the observed one. We apply this method to the dimension estimation of a chaotic pulsation in a finger's capillary vessels.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1681-1682
• /
• 2006

태양전지는 일사량에 따라 그 출력특성이 변화하기 때문에 태양전지로 부터 최대출력을 얻기 위해서는 컨버터에 의한 최대 전력점 추종 제어가 필요하다. 본 연구에서는 태양광 발전시스템의 최대전력추종을 위해 퍼지 이론을 도입한 퍼지제어기를 설계하였다. 그리고 퍼지제어기의 디지털 설계를 위해 태양광 발전시스템의 각 부분을 구성하고, 마이크로프로세서와 FPGA의 두가지 방식으로 제어기를 구현하였다. 또한 구현된 두 가지 방식의 퍼지제어기에 대해 실험을 통하여 비교분석 하였다.