• Korean Journal of Plant Resources
• /
• v.31 no.5
• /
• pp.547-553
• /
• 2018

This study was conducted to investigate the effect of branch extracts of Vaccinium oldhamii (VOB) on melanin synthesis in B16F10 cells. VOB promoted melanin production in absence or presence of ${\alpha}$-melanocyte-stimulating hormone (${\alpha}-MSH$) in B16F10 cells. However, VOB did not affect the expression of tyrosinase and TRP-1 associated with melanin synthesis at the mRNA and protein levels in B16F10. But, VOB decreased TRP-2 protein level and induced tyrosinase activation in B16F10 cells. Inhibition of tyrosinase activity and tyrosinase knockdown attenuated VOB-mediated melanin synthesis. In conclusion, VOB may stimulate melanin synthesis through activating tyrosinase activity.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.1
• /
• pp.13-23
• /
• 2015

This study was performed to compare the effects of different drainage layers on tree growth at the exposed sites of Saemangeum sea dike. 4 types of drainage layers including control(dredged soil), specially prepared bark, gravel, and wood chip were set in 150~165cm depth of soil. Pinus thunbergii and Celtis sinensis were planted after 9 months of soil treatment. Electrical conductivity(EC) of soil in all treated plots were decreased under $4dS{\cdot}m^{-1}$, and NaCl(%) was decreased under 0.05% after 1 year from soil treatment. Soil moisture at the 120cm depth of the bark treated plot was higher than that of the 180cm soil depth, below the drainage layer. It is considered that vertical mobility of water was inhibited. Organic matter(OM) at the 120cm soil depth increased at bark and wood chip treated plots. Survival rates after 4 years of P. thunbergii and C. sinensis were 100% in all treatments. The height of P. thunbergii was not significantly different among the treatments while the height of C. sinensis was significantly different among the treatments and it was highest at the bark treated plot.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.5
• /
• pp.40-50
• /
• 2007

One-year-old rooted cuttings of ten poplar clones and one willow clone were planted in a riparian area in Osan. Survival rate, growth performance, biomass, vitality, defoliation, leaf damages by diseases and/or insects and stem borer damage of the poplar and willow clones have been investigated for three growing seasons. Average survival rate of all eleven clones was declined from 80.7% for the first year to 60.7% for the third year. At three years after planting, poplar clones Dorskamp, ST-148 and Eco-28 showed the best survival rate of 80%. For height and DBH growth, the poplar clone Ay-48 and the willow clone 131-25 were the highest 8.3m and 9.5cm, respectively. However, poplar clones 72-30 and 72-31 were lower than those of the other clones. Clones Ay-48 and 131-25 seemed to have strong vitality when compare to the other clones. No serious damages by diseases and insects were found in most clones. Clones Ay-48 and ST-148 were the most tolerant to various diseases and insects. Clone Ay-48 produced the largest biomass for individual and annual total biomass, 22.5kg and 18.7ton $ha^{-1}$, respectively. Clone Dorskamp showed the best adaptability, which was estimated with survival rate, biomass and damages by various diseases and insects in the riparian area and followed by clones Ay-48, 97-19 and Eco-28. As a consequence, the four clones seemed to be the best candidate poplar clones for the establishment of riparian woody buffer.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.565-576
• /
• 2018

Cellulose acetate (CA) has been widely utilized for composite materials due to its high transparency and thermal resistance. In this study, CNCs (cellulose nanocrystals) were reinforced in CA nanocomposites for fortifying mechanical properties of the composites. In addition, CA nanocomposites reinforced with CNCs were manufactured by extrusion/injection processes applied with CNC-predispersion method for achieving a high dispersion level of CNCs in the CA matrix. According to the analysis of mechanical properties, the CA nanocomposite with 3 wt% CNCs has the highest tensile and flexural strengths due to the reinforcing effect of CNC nanoparticles. Thermogravimetric analysis (TGA) showed that the addition of acid hydrolyzed CNCs slightly lowered the initial pyrolysis temperature of CA nanocomposite.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.6
• /
• pp.76-85
• /
• 2009

This study was carried to select the proper vegetation base materials which improve soil quality in abandoned coal mine areas. Also, we aimed at the feasibility of the direct seeding method without soil molding for the ecological restoration in those areas. We set total eight plots within the study site established on an abandoned coal mine area near Taebaek city, Gangwon province in April 2006. The plots were classified as two groups(straw mats mulching and no mulching), and the four treatments (C; control, MI; microbial innoculation, WC; wood chip, OF; organic fertilizer) were applied in each two groups for the soil conditioning. The survival of Pinus densiflora was highest among other species(Betula platyphylla var. japonica, Amorpha fruticosa and Arundinella hirta). For the non straw mat, the survival rate of Pinus densiflora seedlings was highest in the WC treatment($1,756trees/m^2$). For the straw mat, survival rate of Pinus densiflora seedlings was also highest in the WC treatment ($1,622trees/m^2$). In addition, for the non straw mat, the height growth of Pinus densiflora seedling was highest in the OF treatment($12.4{\pm}3.9cm$). For the straw mat, the height growth of Pinus densiflora seedling was also highest in the OF treatment($18.7{\pm}5.3cm$). In general, organic fertilizer treatment with the straw mat was most effective for seedling growth. Also, we suggested that the direct seeding method without soil molding could be sufficiently possible for revegetating abandoned coal mine, Korea.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.2
• /
• pp.163-171
• /
• 2014

Environmental issues about indoor air quality have been increased and focused on volatile organic compounds (VOCs) caused cancer, asthma, and skin disease. Reducing VOCs has been attempted in many different methods such as using environmentally friendly materials and air cleaner or purifier. Charcoal is well known material for absorbing VOCs. Therefore, carbonized board from medium density fiberboard has been developed. We assumed that the source of carbonized boards can be any type of wood-based panels. In this study, carbonized boards were manufactured from oriented strand board (OSB) at 400, 600, 800, and $1000^{\circ}C$. Each carbonized OSB (c-OSB) was evaluated and determined physiomechanical characteristics such as exterior defects, dimensional shrinkage, modulus of elasticity, and bending strength. No external defects were observed on c-OSBs at all carbonizing conditions. As carbonizing temperature increased, less porosity between carbonized wood fibers was observed by SEM analysis. The higher rate of dimensional shrinkage was observed on c-OSB at $1000^{\circ}C$ (66%) than c-OSB at 400, 600, and $800^{\circ}C$ (47%, 58%, and 63%, respectively). The densities of c-OSBs were lower than original OSB, but there was no significant different among the c-OSBs. The bending strength of c-OSB increased 1.58 MPa (c-OSB at $400^{\circ}C$) to 8.03 MPa (c-OSB at $1000^{\circ}C$) as carbonization temperature increased. Carbonization temperature above $800^{\circ}C$ yielded higher bonding strength than that of gypsum board (4.6 MPa). In conclusion, c-OSB may be used in sealing and wall for decorating purpose without additional artwork compare to c-MDF which has smooth surface.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.299-304
• /
• 2010

Depending on the progress of the surveying and information processing technology, the rapidly developing field of spatial information and the 3D real world spatial information for a variety of content on the computer was able to easily access. In this research, to study on the spot or to use aerial photographs to measure trees of the acquired data, calculate the trees height, forest area and capacity, determine the distribution of the density of acquired points in the forest and analyze accurate and objective information was acquired. The United States, Canada and so on through the capacity of trees biomass, forest resource analysis, time series monitoring, wildfire behavior modeling and applied research and has been declared. During worldwide is increasing interest in forest resources. In nationally, extensive research and analysis of the forest consists of the correct management and protection of forest resources to be effective.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.293-299
• /
• 2009

In manufacturing the crack-free carbonized boards using fiberboards, shrinking ratio, weight loss and density variation of carbonized boards at each carbonization temperature were investigated. Fiberboards with thickness of 3, 4.5, 6, and 18 mm were carbonized while pressed with pressure plates at different temperature from $400^{\circ}C$ to $1,000^{\circ}C$ using a ordinary laboratory furnace. Either of crack or twist was not observed in fiberboards by adapting the pressing carbonization method. The ratios of shrinkage of length, width, and thickness were 10~25%, 12~25%, and 28~48%, respectively, and shrinkage ratio of thickness was higher than those of length and width with increasing the carbonization temperature. Weight loss tended to increase with increasing the carbonization temperature, but low correlation between weight loss in thickness of fiberboards and carbonization temperature was observed. Density of 3 mm carbonized hardboard had the highest value and it tended to increase with increasing the carbonization temperature.

• Korean Journal of Plant Resources
• /
• v.27 no.6
• /
• pp.660-670
• /
• 2014

The Korean plum yew (Cephalotaxus koreana Nakai) is a shade-tolerant, coniferous shrub. The seeds have been used as a folk medicine in Korea, and an alkaloid extract (HTT) is known to have anticancer properties. We estimated the genetic diversity of 429 trees in 16 populations in South Korea using 194 polymorphic amplicons from seven combinations of AFLP primer-restriction enzymes. The average number of effective alleles and the percentage of polymorphic loci were 1.37 and 79.4%, respectively. Shannon's diversity index and the expected heterozygosity were 0.344 and 0.244, respectively. We divided 16 populations into four groups on the UPGMA dendrogram and the PCA biplot. The first two principal components explained 84% of the total genetic variation. Genetic differentiation between populations explained 14% of total genetic variation, and the remaining 86% came from difference between individuals within populations, as determined by an analysis of molecular variance (AMOVA). However, the genetic differentiation did not correlate with the geographic distance between populations from the Mantel test. The Bayesian statistics, which are comparable to Wright's $F_{ST}$ and Nei's $G_{ST}$, were ${\theta}^I=0.406$ and ${\theta}^{II}=0.172$, respectively. The population genetic diversity was slightly lower, and the strength of genetic differentiation was much weaker, than the average of those plants having similar life histories, as assessed using arbitrary marker systems. We discuss strategies for the genetic conservation of the plum yew in Korea.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.556-565
• /
• 2009

Automated visual grading system of lumber needs correct input image. In order to create a correct image of domestic red pine lumber 3.6 m long feeding on a conveyer, part images were captured using area sensor and template matching algorithm was applied to merge part images. Two kinds of template matching algorithms and six kinds of template sizes were adopted in this operation. Feature extracted method appeared to have more excellent image merging performance than fixed template method. Error length was attributed to a decline of similarity related by difference of partial brightness on a part image, specific pattern and template size. The mismatch part was repetitively generated at the long grain. The best size of template for image merging was $100{\times}100$ pixels. In a further study, assignment of exact template size, preprocessing of image merging for reduction of brightness difference will be needed to improve image merging.