• Journal of Applied Reliability
• /
• v.13 no.4
• /
• pp.241-252
• /
• 2013

Because of financial and safety concerns, there are needs for more accurate prediction of bridge behavior. Underestimation of the bridge load carrying capacity can have serious economic consequences, as deficient bridges must be repaired or rehabilitated. Therefore, the knowledge of the actual bridge behavior under live load may lead to a more realistic calculation of the load carrying capacity and eventually this may allow for more bridges to remain in service with or without minor repairs. The presented research is focused on the reliability evaluation of the actual load carrying capacity of existing bridges based on the field testing. Seventeen existing bridges were tested under truck load to confirm their adequacy of reliability. The actual response of existing bridge structures under live load is measured. Reliability analysis is performed on the selected representative bridges designed in accordance with AASHTO codes for bridge component (girder). Bridges are first evaluated based on the code specified values and design resistance. However, after the field testing program, it is possible to apply the experimental results into the bridge reliability evaluation procedures. Therefore, the actual response of bridge structures, including unintentional composite action, partial fixity of supports, and contribution of nonstructural members are considered in the bridge reliability evaluation. The girder distribution factors obtained from the tests are also applied in the reliability calculation. The results indicate that the reliability indices of selected bridges can be significantly increased by reducing uncertainties without sacrificing the safety of structures, by including the result of field measurement data into calculation.

• Structural Engineering and Mechanics
• /
• v.86 no.1
• /
• pp.29-48
• /
• 2023

Pounding happens when contiguous structures with differing heights vibrate out of line caused by a seismic activity. The situation is aggravated due to the insufficient separation gap between the structures which can lead to the crashing of the buildings or total collapse of an edifice. Countries around the world have compiled building standards to address the pounding issue. One of the strategies recommended is the introduction of the separation gap between structures. AS1170.4-2007 is an Australian standard that requires 1% of the building height as a minimum separation gap between buildings to preclude pounding. This article presents experimental and numerical tests to determine the adequacy of this specification to prevent the occurrence of seismic pounding between steel frame structures under near-field and far-field earthquakes. The results indicated that the recommended minimum separation gap based on the Australian Standard is inaccurate if low-rise structure in a coupled case is utilised under both near and far field earthquakes. The standard is adequate if a tall building is involved but only when a far-field earthquake happens. The research likewise presents results derived by using the ABS and SRSS methods.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.1
• /
• pp.39-47
• /
• 2003

In order to test the predictability of the wind resource assessment computer code in our country a field experiment and prediction by WAsP has been compared. A field experiment has been performed in Songdang province, Jeju island, composed of sea, inland flat terrain, a high and a low slope craters. For this experiment, four meteorological towers have been installed at seashores, inland flat and on a crater. Wind resource at one site is predicted by WAsF with the meteorological data at the other three sites. The comparisons show that the WAsP preditions give better agreement with experimental data by adjusting the roughness descriptions.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.167-169
• /
• 2003

This paper presents a theoretical study concerning multibubble dynamics in a sound field and the numerical validation for it by employing our new CFD code MTS-DiCUP. In recent papers, the author has shown theoretically that an unknown characteristic frequency, named 'transition frequency,' exists in a multibubble system. For a N -bubble case, up to 2N -1 transition frequencies per bubble have been predicted, only N ones of them correspond to the natural frequencies of the system. The transition frequencies that do not correspond to the natural frequencies give rise to the phase reversal of bubbles' pulsation without resonant response. In this paper, it has been suggested theoretically that those transition frequencies may cause the sign reversal of the secondary Bjerknes force, which is an interaction force acting between acoustically coupled gas bubbles. This theoretical result has been validated by the direct numerical simulation, at least in a qualitative sense.

• Journal of Information Technology Services
• /
• v.6 no.3
• /
• pp.141-162
• /
• 2007

In this study, we conduct a case analysis on EZmedicom which is one of the leading companies in e-Marketplace for medical fields. By examining major business models of EZmedicom, we provide the success factors in launching the electronic commerce to the potential companies which are interested in participating in e-marketplace for medical fields. Especially, we deduct the solution, logistics field, and electronic group-purchasing as its major business model. Based on these factors, we also propose the MDvan solution which is one of the electronic purchase and supply system, Ezlogis that is the system supporting logistics parts in medical fields, VMI(vendor management inventory), standardization of item code and the linkage of SCM as its critical success factors of EZmedicom. The findings of this study suggest practical and managerial implications for e-Marketplace implementation in the medical field and further research.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.503-510
• /
• 2000

Recently, many kinds of research has been actively developing for a standardization and information related to the construction works. These works include the general field of design, construction, supervision, maintenance and management on facilities. The works of database construction for a standardization and information were chiefly propelled centering around the present conditions related to the design, construction work. The field related to maintenance and management on facilities lags behind in the works of database construction. The establishment of standard classification system(SCS) on facilities and inspection data is most important among the things related to maintenance and management to have a efficiently maintenance and management. This paper suggests SCS on facilities and inspection data according to that of facilities. On the basis of SCS of facilities and inspection data, code work with classification system and input work for a data of maintenance and management was practised. The purpose of this paper is to suggest a kind of statistics data and investigate a characteristics of inspection using statistic data on tunnel structures

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.3 s.309
• /
• pp.76-81
• /
• 2006

Recently, Finite field is applied the cryptography in the modern multimedia communication. Especially, block codes such as Elliptic Curve Cryptosystem and Reed-Solomon code among the error correcting codes are defined with finite field. Also, finite field algorithm is conducting the research actively because many kind of application parts need the real time operating ability therefore the exclusive hardware have been implementing. In this paper, we proposed the inverse finite field algorithm over GF($2^8$) using finite composite field and implemented in a hardware, and then compare this hardware with the currently used 'Itoh and Tsujii' hardware in respect to structure, area and computation time. Furthermore, this hardware was inserted into the AES SubBytes block and implemented on FPGA emulator board to confirm that the superiority of the proposed algorithm through the performance evaluation.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.59-77
• /
• 1998

This paper is focused on the traditional sash weaving handicraft of‘She’ethnic group, which is located in Fujian, Zhejiang, Jiangxi, Guangdong province of China. This research is main-ly based on the field work, analyzed and inter-preted the traditional sash in systematic and reasoned way. The summary of this study are as follows : 1. On its technological aspect, weaving structure of the traditional sash is made of warp rod backed weaving. The used tool is primitive one but the weaving process includes scientific method. 2. From the social-cultural point of view, the sash ha been the symbol of love towards her lover. Every woman of this group had taken training for this sash weaving from a child. 3. On its ethnological aspect, it has been long history and has interchanged with other ethnic group like Miao, Han and also Okinawa country of Japan. The pattern inside this sash are almost looks like characters, but they are not Chinese characters whereas are the inde-pendent code of‘She’ group and have been inherent from ancestors and which will be tran-smitted to their posterity. These independent code of‘She’group are the traditional message to their later generation implicating their natural circumstances, human relationship, ethnic myth, spirit etc. 4. I recognize that the pattern inside the sash is defined as the communicative code and in comparison to language, it is more repetition and less apparent as close code. Nowadays China has been developed es-pecially in the economical fields rapidly. Under the circumstances traditional weaving culture of ethnic groups has been facing a crisis of disappearance, which will be a great loss for the country as well as the human beings. For this reason, I emphasize that it is very immediate to make co-researches into the material culture of Chinese ethnic groups.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.61.1-61.1
• /
• 2012

We examine both optical and optical/near-infrared (NIR) color distributions of the globular cluster (GC) system in the core of the Coma cluster of galaxies (Abell 1656), centered on the giant elliptical galaxy NGC 4874, to study how non-linearities in the color-metallicity relations of GC systems in large elliptical galaxies are linked to bimodal optical color distributions. Since optical-NIR color distributions of extragalactic GC systems reflect the underlying features of the metallicity distributions, we also present the color-color relation for this GC system. In order to do this, we combine F160W ($H_{160}$) NIR imaging data acquired with the Wide Field Camera 3 IR Channel (WFC3/IR), newly installed on Hubble Space Telescope (HST), with F475W ($g_{475}$) and FF814W ($I_{814}$) optical imaging data from the HST Advanced Camera for Surveys (ACS). To quantitatively explain the feature of color distributions, we use the Gaussian Mixture Modeling (GMM) code. Finally, we show the radial distribution of the GCs in the field of NGC 4874.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.05a
• /
• pp.94-99
• /
• 2006

As part of a Department of Defense Grand Challenge Project, advanced high performance computing (HPC) time-accurate computational fluid dynamics (CFD) techniques have been developed and applied to a new area of aerodynamic research on microjets for control of small and medium caliber projectiles. This paper describes a computational study undertaken to determine the aerodynamic effect of flow control in the afterbody regions of spin-stabilyzed projectiles at subsonic and low transonic speeds using an advanced scalable unstructured flow solver in various parallel computers such as the IBM SP4 and Linux Cluster. High efficiency is achieved for both steady and time-accurate unsteady flow field simulations using advanced scalable Navier-Stokes computational techniques. Results relating to the code's portability and its performance on the Linux clusters are also addressed. Numerical simulations with the unsteady microjets show the jets to substantially alter the flow field both near the jet and the base region of the projectile that in turn affects the forces and moments even at zero degree angle of attack. The results have shown the potential of HPC CFD simulations on parallel machines to provide to provide insight into the jet interaction flow fields leading to improve designs.