• 대한의용생체공학회:의공학회지
• /
• 제26권1호
• /
• pp.23-30
• /
• 2005

3D virtual endoscopy has been used as an alternative non-invasive procedure for visualization of hollow organs. However, due to computational complexity, this is a time-consuming procedure. In this paper, we propose a fast volume rendering algorithm based on perspective ray casting for virtual endoscopy. As a pre-processing step, the algorithm divides a volume into hierarchical blocks and classifies them into opaque or transparent blocks. Then, in the first step, we perform ray casting only for sub-sampled pixels on the image plane, and determine their pixel values and depth information. In the next step, by reducing the sub-sampling factor by half, we repeat ray casting for newly added pixels, and their pixel values and depth information are determined. Here, the previously obtained depth information is utilized to reduce the processing time. This step is recursively performed until a full-size rendering image is acquired. Experiments conducted on a PC show that the proposed algorithm can reduce the rendering time by 70- 80% for bronchus and colon endoscopy, compared with the brute-force ray casting scheme. Using the proposed algorithm, interactive volume rendering becomes more realizable in a PC environment without any specific hardware.

• 한국안광학회지
• /
• 제17권1호
• /
• pp.27-35
• /
• 2012

목적: 본 연구에서는 동일 재질 및 렌즈 파라미터를 가진 일반 소프트 콘택트렌즈와 써클 콘택트렌즈의 각막에서 중심안정위치와 움직임 양상을 비교하여 착색 여부에 따른 차이를 알아보고자 하였다. 방법: 눈물양이 정상인 20안을 대상으로 동일한 재질 및 파라미터의 일반 소프트 콘택트렌즈와 써클 콘택트렌즈를 각각 1일에 3시간씩 5일 동안 착용시키면서 각막에서의 중심안정위치와 반복적인 순목 후 콘택트렌즈의 이동거리 및 회전량을 측정하고 비교하였다. 결과: 일반 소프트 콘택트렌즈와 써클 콘택트렌즈 모두 착용 초기의 중심안정위치는 피팅 기준에서 벗어나는 경우가 있었으나 일반 소프트 콘택트렌즈의 경우는 착용 시간이 증가함에 따라 동공 중심으로 모이면서 모든 경우에도 피팅 기준에서 벗어나지 않는 적합한 중심안정위치로 변화되었다. 하지만, 써클 콘택트렌즈는 착용 시간이 증가하여도 수평 방향으로의 중심이탈이 여전히 존재하였다. 일반 소프트 콘택트렌즈와 써클 콘택트렌즈 모두 반복적인 순목 후 각막에서의 이동거리는 착용기간이 증가할수록 감소하였으나 두 콘택트렌즈 간에는 총 착용 기간이나 일일 착용 시간의 증가에 따른 차이는 통계적으로 유의하지 않았다. 반복적인 순목에 의한 써클 콘택트렌즈의 회전양은 착용기간이 증가하였을 때 일반 소프트 콘택트렌즈를 착용한 경우와 비교하여 통계적으로 유의한 차이가 있었다. 결론: 써클 콘택트렌즈의 각막에서의 위치 및 움직임은 일반 소프트 콘택트렌즈와 달라지며 이러한 차이는 착용기간이 증가하면 더 커짐을 밝혔다.

• 한국사회복지학
• /
• 제57권2호
• /
• pp.351-374
• /
• 2005

본 연구는 한국노동패널조사, 1998-2003 자료를 이용하여 빈곤지속기간과 이에 관련된 요인을 분석하였다. 본 연구의 발견에 따르면 우리나라에서는 빈곤에 진입한 사람들의 4분의 3 정도가 2년 안에 빈곤을 탈피하는 정도로 매우 활발한 빈곤탈출양상이 나타난다. 그러나 한 시점에서의 빈곤층을 볼 경우에는 장기빈곤층이 무시할 수 없는 비중을 차지한다. 5년 이상의 장기 빈곤층이 전체 빈곤층의 50%를 차지하며 10년 이상의 최장기 빈곤층도 25%를 넘어선다. 반복빈곤을 분석에 포함하는 경우 장기빈곤층의 비중은 더욱 증가한다. 장기빈곤층의 대표적 집단은 노인가구이다. 장기빈곤의 경향이 강한 다음 집단은 비노인 여성가구주 가구이다. 90년대 후반 경제위기 이래로 근로빈곤층의 증가가 커다란 사회적 관심의 대상이 되었지만 이들의 주력을 차지하는 비노인 남성가구주 가구의 대다수는 일시적으로 빈곤을 경험하는 단기빈곤층인 것으로 보인다.

• 한국의류학회지
• /
• 제41권2호
• /
• pp.326-340
• /
• 2017

This study explores the daily life of Korean designers in New York. We use in-depth interviews within the daily lives of participants to first reveal the time structure and meaning of everyday life. In this everyday time frame, this study reveals the content and meaning of life in New York, which is especially useful for fashion majors. Participants were 11 single Korean women around 30 years old working as designers in New York. Data was collected from Manhattan, New York, from November 2013 to February 2014 through the use of in-depth interviews and participant observation. Data collected daily life information on time usage, money, and energy that is first summarized into 229 meaning units. In the following, 55 central meanings were derived from stories common to behaviors for study participants and 19 subcategories were compressed into academic language. Finally, the generalized categories are divided into six categories of study life, work life, future life, family life, leisure life and fashion life. As a result of the first study, the daily time structure consisted of customary public time and personal repeat time. Second, the customary public time categories included the studying for 'Beginning to jump again to the best', 'Now working as a designer in New York', and future life expecting 'Future growing as a career woman'. Repeated personal time categories include family life: 'A single life of a lonely and poor gentile', leisure life: 'Healing life that is supported by abundant advanced culture', and fashion life: 'New York fashion life coexist with harmony'. Third, work was the center of everyday life for study participants versus fashion and leisure that were central to everyday life when not working.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.619-627
• /
• 2005

An initial member sections of steel structures is selected by experience of expert building structural designers. And appropriate member section is designed by repeat calculation through structural analysis. Therefore an initial assumption of member section is necessary for saving the time for structural design and is important to acquire safety of building structures. Also brace damper are generally used to prevent or decrease structural damage by its hysteretic behavior in building structures subjected to strong earthquake. Based on plastic design, the initial section of members for architectural steel structures with brace hysteretic dampers is presented and seismic effect of structural behavior by the ratio of damper stiffness to structural story stiffness is estimated in this paper.

• Design & Manufacturing
• /
• 제8권1호
• /
• pp.35-39
• /
• 2014

Window roller housings are durable because high-quality source materials such as stainless steel is used in making them. After a series of precise structure analysis, their design is optimized. They are subject to repetitive driving tests of more 100,000 times, durability tests, impact resistance tests, corrosion tests and others. For a long time, gaps often occur in press molded products owing to serious squareness deformation and flatness deformation of them. Severe burrs in press molded products require frequent grinding, which leads to short life cycle and rough or unreliable movement of assembled roller housing, which, in turn, causes product defects. This study focuses on developing measures to resolve existing defects and to improve lifespan of dies by designing and making a window roller shearing die.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.39-42
• /
• 2012

Pusher-Loaded Scrapers are important construction equipment for large earthmoving operations. Production rates of a Pusher-Loaded Scraper vary greatly in accordance with the temperature or elevation, the equipment performance, haul speed, haul-road conditions, the method of loading, and Number of scrapers per one pusher. Determining of most economical scrapers fleet regarding the size of equipment, model name, and number of scrapers demands time-consuming calculation because it needs to reference of varied performance charts or tables and repeat complicated calculation. In this study, decision-making support system for the Optimal Pusher-loaded Scrapers Fleet is suggested for the purpose of calculating easily and handling effectively variables which are changed depend of the work conditions. The prototype of this program is developed using MATLAB. And the Database of Pusher-loaded Scraper embodies Performance chart & Retarder chart, soil properties, and calculation-support table.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2001년도 제2회 생물정보학 국제심포지엄
• /
• pp.11-35
• /
• 2001

For the last twenty years fragment assembly in DNA sequencing followed the "overlap - layout - consensus"paradigm that is used in all currently available assembly tools. Although this approach proved to be useful in assembling clones, it faces difficulties in genomic shotgun assembly: the existing algorithms make assembly errors and are often unable to resolve repeats even in prokaryotic genomes. Biologists are well-aware of these errors and are forced to carry additional experiments to verify the assembled contigs. We abandon the classical “overlap - layout - consensus”approach in favor of a new Eulerian Superpath approach that, for the first time, resolves the problem of repeats in fragment assembly. Our main result is the reduction of the fragment assembly to a variation of the classical Eulerian path problem. This reduction opens new possibilities for repeat resolution and allows one to generate error-free solutions of the large-scale fragment assemble problems. The major improvement of EULER over other algorithms is that it resolves all repeats except long perfect repeats that are theoretically impossible to resolve without additional experiments.

• 경영과학
• /
• 제12권1호
• /
• pp.51-60
• /
• 1995

This paper presents a workload based model and cell design support system (CDSS) in manufacturing cell design. The proposed model consider manufacturing factor such as machine capacity, production volume, process time, and cell size. Based on those information, workload is calculated and according to the workload, the relationship between machine and part is represented by the workload matrix. To form the manufacturing cell, correlation similarity coefficient (CSC) among machines are calculated and a pair of machines that has the highest value of CSC is assigned to a machine cell. Repeat the above steps until the desired manufacturing cells are obtained. Finally, a cell design support system that could increase the efficiency in the application of a proposed model is developed. The proposed model and CDSS are illustrated by a numerical example.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.946-949
• /
• 2006

With repeated coverage, spaceborne SAR (Synthetic Aperture Radar) instruments provide the most efficient means to monitor and study the changes in important elements of the marine environment. Due to highresolution of SAR data, the coverage of SAR sensor is always limited, especially for a repeat cycle. With more SAR sensors from various satellites, new data products such as ocean surface drift can be derived when two SARs' tracks overlap in a short time over coastal areas. Currently, there are two SAR sensors on different satellites with almost the exactly same path. That is, ERS-2 is following ENVISAT with a 30-minutes delay, which will be a good timing for ocean mesosclae feature tracking. For another application, a mystery ship near a big eddy with strong ship wake has been tracked between ERS-2 and ENVISAT SAR images to estimate its ship speed.