• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.123-126
• /
• 2006

Existing Deck Plate for a one of system forms, there is various advantage and application actual results increasing rapidly. But design of deck is depending on engineering data collections or design data on deck manufacture ordinarily. When construct, is responsible for deflection occurrence, And Because confirmation of crack occurrence region is impossible, there is difficulty of repair, reinforcement about crack and water leakage. According to got following conclusion as result that economic performance, preservation administration and repair reinforcement develops easy using steel truss snap tie by wedge pin on coating plywood that is slab Panel Wood System Form method of construction there is Deck Plate's advantage. (1) In stab lower part is exposed disjointing in which a criminal is fastened to be interrogated after construction acceptance and repair, reinforcement of crack is possible (2) Construction cost curtailment effect of about 29.2% than conventional type and about 10% than deck plate (3) Construction period reduction of about 3 day than conventional type and about 0.3 day than deck plate (4) Labor curtailment effect more than about $29{\sim}50%$ from conventional type

• Journal of Chest Surgery
• /
• v.54 no.3
• /
• pp.172-178
• /
• 2021

Background: Complicated acute type B aortic dissection is a life-threatening condition with high morbidity and mortality. The aim of this study was to report a single-center experience with endovascular stent-graft repair of acute type B dissection of the thoracic aorta and to evaluate the mid-term outcomes. Methods: We reviewed 18 patients treated for complicated acute type B aortic dissection by thoracic endovascular aortic repair (TEVAR) from September 2011 to July 2017. The indications for surgery included rupture, impending rupture, limb ischemia, visceral malperfusion, and paraplegia. The median follow-up was 34.50 months (range, 12-80 months). Results: The median interval from aortic dissection to TEVAR was 5.50 days (range, 0-32 days). There was no in-hospital mortality. All cases of malperfusion improved except for 1 patient. The morbidities included endoleak in 2 patients (11.1%), stroke in 3 patients (16.7%), pneumonia in 2 patients (11.1%), transient ischemia of the left arm in 1 patient (5.6%), and temporary visceral ischemia in 1 patient (5.6%). Postoperative computed tomography angiography at 1 year showed complete thrombosis of the false lumen in 15 patients (83.3%). Conclusion: TEVAR of complicated type B aortic dissection with a stent-graft was effective, with a low morbidity and mortality rate.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.3
• /
• pp.199-207
• /
• 2012

Concrete is an economical construction material and for that reason it is widely used in buildings and infrastructures. The use of deicing salts, expansion joint failure, and freeze-thaw cycles have led to concrete bridge girders experiencing corrosion of steel reinforcement and becoming unsafe for driving. The goal of this research is to assess the effectiveness of current and possible repair techniques for the end region of damaged prestressed concrete girders. To do this, three American Association of State Highway and Transportation prestressed concrete girders were tested to failure, repaired, and retested. Three different repair materials were tested including carbon fiber, glass fiber, and surface mounted rods. Each different repair material was also tested with and without injected epoxy. Comparisons were then made to determine if injecting epoxy had a positive effect on stiffness and strength recovery as well as which repair type regained the largest percentage of original strength.

• Journal of Chest Surgery
• /
• v.36 no.8
• /
• pp.566-575
• /
• 2003

We reviewed our 18-year surgical experience of biventricular repair for double-outlet right ventricle. Material and Method: One hundred twelve consecutive patients (80 males and 32 females) who underwent biventricular repair for double-outlet right ventricle between May 1986 and September 2002 were included. We assessed risk factors for early mortality and reoperation. Reoperation-free survival rate and actual survival rate were analysed. Result: Most common type of ventricular septal defect was subaortic (n=58, 52%) and non-committed type was second most common (n=32, 29%). Four different surgical methods were used: intraventricular baffle repair (n=71 , 63%): right ventricle to pulmonary ariery conduit interposition or REV with left ventricle to aorta baffle repair (n=24, 21 .4%): arierial switch operation with left ventricle to pulmonary artery baffle (n=14, 12.5%): Senning atrial switch operation with left ventricle to pulmonary artery baffle (n=3, 2.7%). Thirty four patients(30%) underwent palliative procedures before definite repair. Twenty three patients (21%) required reoperations. There were 12 (10.7%) early deaths and 4 late deaths. Age younger than 3 months at repair (p=0.003), cardiopulmonary bypass and aortic cross clamp time (p=0.015, p=0.067), type of operation (arterial switch operation) (p <0.001) and type of ventricular septal defect (subpulmonic type) (p=0.002) were revealed as risk factors for early death in univariate analysis, while age under 3 months was the only significant risk factor in multivariate analysis. Patients younger than 1 year of age (p=0.02), pulmonary artery angioplasty at definitive repair (p=0.024), type of ventricular septal defect (non-committed) (p=0.001), type of operation (right ventricle to pulmonary artery conduit interposition and REV operation) (p=0.028, p=0.017) were risk factors for reoperation in univariate analysis but there was no significant risk factor in multivariate analysis. Follow-up was available on 91 survivals with a mean duration of 110.8$\pm$56.4 (2~201) months. 5, 10 and 15 year survival rates were 86.5%, 85% and 85% and reoperation free survival were 85%, 71.5%, 70%. Conclusion: Age under 3 months at repair, subpulmonic ventricular septal defect and arterial switch operation were significant risk factors for early mortality. Patients with non-committed ventricular septal defect and who underwent conduit interposition or REV operation were risk factors for reoperation. With careful attention to chose best timing and surgical approach depending on morphologic characteristics, biventricular repair for double outlet right ventricle can be achieved with good long-term outcome.

• Journal of Information Display
• /
• v.10 no.4
• /
• pp.202-205
• /
• 2009

An automated circuit repair system was developed for enhancing the yield of nondefective liquid crystal panels, focusing on the resist patterns on the circuit material layer of thin-film transistor (TFT) substrates prior to etching. The developed system has an advantage over the parallel conventional system: In the former, the repair conditions depend on the type of resist whereas in the latter, the repair parameters must be fine-tuned for each circuit material. The developed system consists of a resist pattern defect inspection system and a pattern repair system for short and open defects. The repair system performs fine corrections of abnormal areas of the resist pattern. The open-repair system is equipped with a syringe to dispense resist. To maintain a stable resist diameter, a thermal insulator was installed in the syringe system. As a result, the diameter of the dispensed resist became much more stable than when no thermal insulator was used. The resist diameter was kept within the target of $400{\pm}100{\mu}m$. Furthermore, a prototype system was constructed, and using a dummy pattern, it was confirmed that the system worked automatically and correctly.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.219-226
• /
• 2002

To systematic maintenance and record 10,000 port structures, under Ministry of Maritime and Fisheries, data base management system is required. In this study, POMIS(Port Maintenance and Information System) program is developed for this Purpose. In this program, records for inspection and repair for the various type of port structures can be maintained and operated through internet. Thus ministry can efficiently maintenance and repair port structures and systematically manage computerized maintenance and repair data.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.104-109
• /
• 2017

It is important to keep the distribution of the raw material mixture constant, in order to maximize the effect of the pre-mix type repair mortar, and it is also necessary to increase the performance of the mixer in order to minimize the deviation of the product. In this study, three kinds of mixer used in production sites were used to make repair mortar and the properties of each mortar were examined. As a result, it is confirmed to the difference in properties of pre-mix type repair mortar differ depending on the type of mixer, and the fluidized zone mixer showed relatively good results. In addition, it is preferable to set the mixing time to about 10 minutes to 15 minutes in order to ensure workability and optimum physical properties.

• Clinics in Shoulder and Elbow
• /
• v.18 no.1
• /
• pp.36-42
• /
• 2015

Background: Repair of superior labral anterior to posterior (SLAP) lesion in patients older than 40 years is controversial. The purpose of this study was to evaluate clinical outcomes of arthroscopic repair of SLAP lesions between younger and older patient groups. Methods: We reviewed 50 patients with isolated type II SLAP lesions who underwent arthroscopic repair. Patients were divided into 2 groups: group 1 included 20 patients aged <40 years, and group 2 included 30 patients aged ${\geq}40years$. Functional outcome at the final follow-up was assessed using a visual analog scale for pain and satisfaction, American Shoulder and Elbow Surgeons form, Constant score, University of California at Los Angeles score, and periodic change in range of motion (ROM). Anatomical outcome was evaluated using computed tomography (CT) arthrography at least 1 year after surgery. Results: No significant differences in functional scores or postoperative ROM were observed between the 2 groups. In group 2, later recovery of ROM (forward flexion, p=0.025; internal rotation, p=0.034) and lower satisfaction score (p=0.06) were observed for atraumatic patients (n=16) compared to patients with traumatic injury (n=14). Fifteen patients in group 1 (15/17, 88%) and 21 patients in group 2 (21/26, 81%) demonstrated a healed labrum on postoperative CT arthrography, and this difference was not significant. Conclusions: The results of this study suggest that arthroscopic repair of type II SLAP lesions can yield good functional and anatomical outcomes regardless of age, if patient selection is adequate. However, the delay in ROM recovery and lower satisfaction, particularly in older patients without traumatic injury, should be considered.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.61-68
• /
• 2020

In this study, the international standard ISO TS 16774 Part 3 Test Method for Water (wash out) Resistance and KS F 4935 ｢Sealant Injection type for water leakage maintenance of adhesive flexible rubber asphalt series｣, which are standardized as a quality control method of injection type repair materials used for water leakage cracks in underground concrete structures, are currently used in Korea. As a result, considering the performance criteria of "mass change rate -0.1%" stipulated in KS F 4935, the remaining 13 types repair materials, excluding RG-2 of synthetic rubber and UG-1 of urethane, need to be reviewed for stabilization of the loss resistance due to the flow of ground water. The results of this study are determined to be available as a basic indicator for the selection of repair materials used for cracks in concrete structures. In addition, it is expected that the results of this study can be utilized as reference data that can be reflected in the improvement of the quality of repair materials that will be researched and developed later.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.269-276
• /
• 1998

This paper proposes an opportunistic age replacement policy. The system has two types of failures. Type I failures (minor failures) are removed by minimal repairs, whereas type II failures are removed by replacements. Type I and type II failures are age-dependent. A system is replaced at type II failure (catastrophic failure) or at the opportunity after age T, whichever occurs first. The cost of the minimal repair of the system at age z depends on the random part C(z) and the deterministic part c(z). The opportunity arises according to a Poisson process, independent of failures of the component. The expected cost rate is obtained. The optimal $T^{\ast}$ which would minimize the cost rate is discussed. Various special cases are considered. Finally, a numerical example is given.