• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.1-11
• /
• 2003

The service reliability of power plants strongly depends on the excellent performance and integrity of hydrodynamic bearings. Consequently, the bearings must be properly designed so as to control vibration amplitudes of rotor due to mass unbalance in passing critical speeds and also suppress self-excited vibrations of rotor even over maximum rated speeds. Furthermore, the bearings must be designed so as to maintain required tribological performance even under severe operating conditions. However, various tribological troubles have been experienced in power plants in Japan. The actual troubles are analysed, focusing on not only direct mechanical causes but also specific bearing designs that surfaced the troubles. Furthermore human factors that decided such designs are also studied. The powerful database of troubles and analyses will contribute greatly to designing advanced power plants with enhanced service reliability in the future. To this end, trouble information should be disclosed, shared and transferred limitlessly. Cooperation of users of power plants is essential to making more advanced design specifications, because no one has easier access to operating and trouble information of power plants than users.

• 한국소음진동공학회논문집
• /
• 제14권8호
• /
• pp.695-701
• /
• 2004

This study is to suggest a Probabilistic design determining configurations of slider air bearings with the dimensional manufacturing tolerances of the ABS. The probabilistic design problem is formulated to minimize the variation in flying height from a target value while satisfying the desired probabilities keeping the pitch and roll angles within a suitable range. The proposed approach first selves the deterministic optimization problem. Then, beginning with this solution, the RBDO is continued with the probabilistic constraints affected by the random variables with a fixed standard deviation in normal distribution. The RBDO results are directly compared with the values of the initial design and the results of the deterministic optimization, respectively. The reliability analyses are performed by the descriptive sampling (DS) to show the effectiveness and accuracy of the proposed approach. It is demonstrated that the Proposed RBDO approach can efficiently obtain an optimum solution satisfying all the desired probabilistic constraints.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.129-137
• /
• 2004

This paper presents an accelerated life test for burnout of tungsten filament of incandescent lamp. From failure analyses of field samples, it is shown that their root causes are local heating or hot sports in the filament caused by tungsten evaporation and wire sag. Finite element analysis is performed to evaluate the effect of vibration and impact for burnout, but any points of stress concentration or structural weakness are not found in the sample. To estimate the burnout life of lamp, an accelerated life test is planned by using quality function deployment and fractional factorial design, where voltage, vibration, and temperature are selected as accelerating variables. We assumed that Weibull lifetime distribution and a generalized linear model of life-stress relationship hold through goodness of fit test and test for common shape parameter of the distribution. Using accelerated life testing software, we estimated the common shape parameter of Weibull distribution, life-stress relationship, and accelerating factor.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 춘계학술대회
• /
• pp.525-534
• /
• 2012

The issue is all about the study of warranty data collection and the analysis method to get a reasonable information of the products and improve reliability. In this paper, we consider the classification of warranty data analyses into a parametric and non-parametric analysis and method to get a reasonable information of the products. Also, it is considered the research trend by grouping the relationship among the studies. This study would be used to find the effective application and the condition of warranty data analysis.

• Geomechanics and Engineering
• /
• 제7권4호
• /
• pp.431-458
• /
• 2014

Construction of a new cavern close to an existing cavern will result in a modification of the state of stresses in a zone around the existing cavern as interaction between the twin caverns takes place. Extensive plane strain finite difference analyses were carried out to examine the deformations induced by excavation of underground twin caverns. From the numerical results, a fairly simple nonparametric regression algorithm known as multivariate adaptive regression splines (MARS) has been used to relate the maximum key point displacement and the percent strain to various parameters including the rock quality, the cavern geometry and the in situ stress. Probabilistic assessments on the serviceability limit state of twin caverns can be performed using the First-order reliability spreadsheet method (FORM) based on the built MARS model. Parametric studies indicate that the probability of failure $P_f$ increases as the coefficient of variation of Q increases, and $P_f$ decreases with the widening of the pillar.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권1호
• /
• pp.51-61
• /
• 2006

Failure analyses were conducted on a crank shaft and a chock liner by using X-ray diffraction, optical microscopy and SEM/EDS techniques. In the crank shaft, a crack developed where a maximum tensile stress coincided with band structure formed by hot forging. The maximum tensile stress was observed to originate from volume expansion during high frequency induction heat treatment and the band structure to develop between upper and lower dies during hot forging. In the chock liner, the wear mechanism varied with the chemical affinity and hardness of liner material relative to friction pair of housing liner. Brass of low chemical affinity and hardness compared to housing liner showed uniform adhesive wear. STS 304 and STS 420J2 of high chemical affinity showed galling and scoring respectively.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권2호
• /
• pp.112-121
• /
• 2017

Purpose: The most previous works on designing accelerated life tests (ALTs) are focused on the application of a single stress. Because of the difficulty to obtain the sufficient information in a reasonable duration using single stress only, there is needed in practice to use multiple-stress ALTs frequently. This paper presents new practical plans with two stresses for Weibull distribution. Methods: The four-level practical plans based on rectangle test region are proposed and compared with the corresponding three-level statistically optimal plans. Sensitivity analyses for assumed design parameters and life-stress relationship are conducted. Results: A procedure to choose practical ALT plans is illustrated with a numerical example and guidelines for planning two-stress ALTs are provided. Conclusion: The proposed two-stress ALT plans on practical constraints to assess a quantile of Weibull lifetime distribution at the use condition are efficient and robust.

• 전산구조공학
• /
• 제3권1호
• /
• pp.51-57
• /
• 1990

현행 원자력 발전 구조물의 설계하중 조합규준은 확률적 개념에 의한것이 아닌 재래적인 설계 개념을 그대로 사용하고 있는 실정이다. 본 연구에서는 원자력 발전 구조물의 설계하중 조합 규준을 FEM에 기초한 랜덤 진동 해석을 통하여 제안하였다. 종래의 일반적 신뢰성 해석 방법과는 달리 유한요소 해석 결과를 랜덤 진동 이론에 결합하여 해석함으로서 지진하중과 같은 각종 동적 하중에 대한 보다 정확한 신뢰성 해석이 가능하게 되었다. 본 연구에서는 설계하중 조합 규준을 통하여 국내 원자력 발전 구조물에 적합한 설계하중 계수를 제안하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.645-648
• /
• 2003

Induction motors are a critical component of industrial processes. Sudden failures of such machines can cause the heavy economical losses and the deterioration of system reliability. Based on the reliability and cost competitiveness of driving system (motors), the faults detection and the diagnosis of system are considered very important factors. In order to perform the faults detection and diagnosis of motors, the vibration monitoring method and motor current signature analysis (MCSA) method are emphasized. In this paper, MCSA method is used for induction motor fault diagnosis. This method analyses the motor's supply current. since this diagnoses faults of the motor. The diagnostic algorithm is based on the principal component analysis(PCA), and the diagnosis system is programmed by using LabVIEW and MATLAB.

• Earthquakes and Structures
• /
• 제25권1호
• /
• pp.69-78
• /
• 2023

Life-cycle performance analysis of a reinforced concrete box section bridge was generated. Moreover, Monte Carlo simulation with important sampling (IS) was used to simulate the bridge material and load uncertainties. The bridge deterioration model was generated with the basic probabilistic principles and updated according to the measurement data. A genetic algorithm (GA) with the response surface model (RSM) was used to determine the deterioration rate. The importance of health monitoring systems to sustain the bridge to give services economically and reliably and the advantages of fiber-optic sensors for SHM applications were discussed in detail. This study showed that the most effective loss of strength in reinforced concrete box section bridges is corrosion of the reinforcements. Due to reinforcement corrosion, the use of the bridge, which was examined, could not meet the desired strength performance in 25 years, and the need for reinforcement. In addition, it has been determined that long-term health monitoring systems are an essential approach for bridges to provide safe and economical service. Moreover the use of fiber optic sensors has many advantages because of the ability of the sensors to be resistant to environmental conditions and to make sensitive measurements.