• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.3
• /
• pp.34-45
• /
• 2019

Based on the analysis of congestion conditions in small cities with a population of less than 500,000 in Chungcheong Province, this study conducted a feasibility study on the scope of congestion improvement projects. Further, traffic congestion management standards were further established by analyzing LOS as well as the speed of traffic presented by congestion criteria in the existing Project. According to the analysis according to the congestion management standard LOS suggested in this study, Asan city has the most major number of highways where LOS E occurs for more than 3 hours, followed by Sejong City and Gongju City. In addition, when comparing the ratio of the busy main roads according to the frequency of LOS E by city size, it was analyzed that the ratio and extension of the busy highways relative to the overall extension of the large Chungcheong area are similar to the ratio in small cities in the Chungcheong region. Therefore, traffic congestion occurred in small cities and the feasibility of the improvement project was revealed.

• The Journal of the Korea Contents Association
• /
• v.19 no.1
• /
• pp.660-670
• /
• 2019

The purpose of this study is to elaborate the logical configuration of livelihood benefits for the institutionalized recipients under the renewed custom-tailored benefit system of National Basic Livelihood Security System(NBLSS) and to present appropriate level of benefits in terms of coherency of the system. In July 2015, the NBLSS was reformed to adopt a relative level of benefit standard for the general recipients according to certain amount of ratio of standard median income. However, the benefit for the institutionalized recipients was still based on the cost of necessities of absolute poverty level. It is at this juncture that this study suggests livelihood benefits for the institutionalized recipients reflect standard median income to comply with the reform of the NBLSS. To this end, this study firstly derives basic living items for the institutionalized recipients based on the literature review and FGI. Secondly, it calculates the reflection ratio of livelihood benefits utilizing Household Trend Survey's consumption data under 40%. Finally, it applies equivalence scale of households to adjust the under-represented scale for large size institutions. To continue the reflection ratio method, it is necessary to review the consumption trends and the stability of the reflection ratio periodically.

• International Area Studies Review
• /
• v.13 no.3
• /
• pp.331-359
• /
• 2009

We forecast the performance of the Korean biotechnology industry by adopting similar development paths taken by the U.S. biotechnology and Korean ICT industries. Our long-term forecasting techniques predict that Korean BT market size will increase from 3.7 billion to 10.8 billion U.S. dollars by year 2030. The pharmaceutical industry, one of major bio-subindustries, is expected to dominate Korean BT market in the long-run. Also, the relative portion of the exports in the Korean BT industry will be larger and thus the export-oriented government policy is required for the long-run growth of the Korean BT industry. Since the Korean ICT industry has already slowed down in the development, Korean BT industry is likely to catch up with ICT industry in the near future.

• Journal of the Korean Regional Science Association
• /
• v.35 no.2
• /
• pp.33-47
• /
• 2019

The purpose of this study is to examine the effect of urban decline on Subjective Well-being(SWB). According to the scale of the city, the municipal districts of Korea are classified into metropolitan cities, middle cities, and small cities. The SWB in the growth area, the maintenance area, and the declining area according to the degree of relative decline of each city group was examined. In addition, in order to consider the complex nature of urban decline, SWB was divided into overall life satisfaction, household income satisfaction, and housing environment satisfaction. Panel models were also used to identify the dynamic relationship between the progress of urban decay and the change in SWB. The empirical analysis of this study examined the effect of decline on the SWB for the local residents. As a result, it was confirmed that the effect of urban decline on the SWB of the residents varies according to the size of the city where the individual resides, according th the SWB by the division. In the case of metropolitan inhabitants, the decline of the housing environment of the residents due to deterioration of the physical environment was confirmed as a result of the decline of the city, but the overall life satisfaction was increased due to the decrease of the social costs such as congestion in an overcrowded area. On the contrary, in the case of the residents of the small cities, it is confirmed that the decline of the city reduces the overall life satisfaction, household income satisfaction, and housing environment satisfaction.

• Clean Technology
• /
• v.25 no.3
• /
• pp.189-197
• /
• 2019

In this study an optimization of the preparation conditions of activated carbon with a ternary metal ion material to treat $H_2S$, which is classified as a representative odor substance, was carried out. For a metal ion material for enhancing the adsorption performance of hydrogen sulfide, performance enhancement was confirmed by combining Li and Fe or a ternary combination (K, Li, Fe) based on KI, which is a substance promoting hydrogen sulfide adsorption performance. Also, it was determined by XRD analysis that the reaction of each active substance with $H_2S$ was because of binding. The adsorption performance increased more than 3 times with heat treatment of the adsorbent with nitrogen compared with heat treatment with air. The maximum adsorption constant ($q_m$) value of the optimum adsorbent was 97.07, which is 6 times higher than that of the existing K-based impregnated activated carbon. It was confirmed that the objective adsorption amount ($0.3g\;g^{-1}$) was secured by an equilibrium between the mass transfer rate and adsorption rate. From the results, it was confirmed that the performance improvement was noticeable even when activated carbon with a reagent grade activated carbon particle size was modified. It was confirmed that the adsorption performance exists at high relative humidity levels of 60 and 100%, and the optimized preparation can be applied to a wet process such as a scrubber downstream.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.85-101
• /
• 2019

Recently, thank to the popularization of light-weight drone through the significant developments in computer technologies as well as the advanced automated procedures in photogrammetry, Unmanned Aircraft Systems have led to a growing interest in industry as a whole. Documentation, maintenance, and restoration projects of large scaled cultural property would required accurate 3D phenomenon modeling and efficient visual inspection methods. The object of this study verify on the accuracies achieved of 3D phenomenon reconstruction as well as on the validity of the preservation, maintenance and restoration of large scaled cultural property by UAS photogrammetry. The test object is cltural heritage(treasure 1324) that is the rock-carved standing Bodhisattva in Soraesan Mountain, Siheung, documented in Goryeo Period(918-1392). This standing Bodhisattva has of particular interests since it's size is largest stone Buddha carved in a rock wall and is wearing a lotus shaped crown that is decorated with arabesque patterns. The positioning accuracy of UAS photogrammetry were compared with non-target total station survey results on the check points after creating 3D phenomenal models in real world coordinates system from photos, and also the quantified informations documented by Culture Heritage Administration were compared with UAS on the bodhisattva image of thin lines. Especially, tests the validity of UAS photogrammetry as a alternative method of visual inspection methods. In particular, we examined the effectiveness of the two techniques as well as the relative fluctuation of rock surface for about 2 years through superposition analysis of 3D points cloud models produced by both UAS image analysis and ground laser scanning techniques. Comparison studies and experimental results prove the accuracy and efficient of UAS photogrammetry in 3D phenomenon modeling, maintenance and restoration for various large-sized Cultural Heritage.

• Korean Journal of Microbiology
• /
• v.55 no.3
• /
• pp.313-315
• /
• 2019

An anaerobic bacterial strain WCF-2 was isolated from cow dung in finding cellulose-degrading bacteria for use as silage additives. Strain WCF-2 showed a higher cellulolytic activity than Cellulosilyticum lentocellum DSM $5427^T$, the closest relative of strain WCF-2 (98.2% of 16S rRNA gene sequence similarity). We sequenced the complete genome of strain WCF-2 and compared it with that of C. lentocellum DSM $5427^T$. The OrthoANI value between the two strains was 97.9% thus strain WCF-2 was identified as C. lentocellum. The genome size of strain WCF-2 was 4,779,774 bp with a G + C content of 34.4%, 4,154 coding genes (CDS), 54 pseudo genes, and 142 RNA genes. Strain WCF-2 harbored seven cellulase genes, five of which showed low similarities with those of C. lentocellum DSM $5427^T$.

• Membrane Journal
• /
• v.28 no.6
• /
• pp.379-387
• /
• 2018

This study was conducted to improve the membrane characteristics and performance by increasing hydrophilicity by adding additives to the ultrafiltration polysulfone (PSf) hollow fiber membrane. The mixed matrix membranes (MMMs) were prepared by dispersing 15 nm of fumed silica (FS) in the spinning solution at 0.1, 0.3 and 0.5 wt%. SEM analysis was carried out to confirm the cross-section and surface condition. It was confirmed that mean pore radius of the hollow fiber increased by 4 nm as FS was added. In addition, contact angle measurement was carried out for the hydrophilicity analysis of hollow fiber membranes, and it was confirmed that the hydrophilicity of MMMs were increased by adding of FS. In the case of water permeability, the membrane including FS showed 91~96 LMH and showed 5~11% more increase than PSf membrane. In the antifouling performance test, relative flux reduction ratios of FS mixed hollow fiber membranes were lower than that of PSf membranes, and it was confirmed that increase of hydrophilicity hinders adsorption of hydrophobic BSA on the membrane surface.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.734-746
• /
• 2020

Purpose: Increase in the size and number of underpasses rises occurrence of disasters such as fire and flooding inundation in underpasses. In the occurrence of disasters, the underpasses are more vulnerable to expose of crucial disasters than the general roads due to they are built underground. Therefore, The purpose of this paper is to derive system improvement items to prevent and control disasters in underpasses. Method: A hierarchical model of disaster impact factors and alternatives was developed based on prior researches and expert advices on disaster analyses and impact factors in the underpasses. The developed model was employed for surveys of pairwise comparison, and rankings of improvement were determined by applying the AHP method. Result: With a consistency of the surveys, results of relative weights of evaluation criteria(traffic accidents, fire, flooding inundation) and alternatives(law, system/planning, maintenance/human factor/environment) shows that improvement of laws and system related to the fire disaster is a top priority to prevent and control disaster of the underpasses. Conclusion: From experts' point of view, strengthening laws and systems related to disater prevention facilities such as water spray facilities, external(ground) exit in relation to fire in underpasses showed that it is an alternative to prevent disasters and minimize damage to underpasses.

• Particle and aerosol research
• /
• v.16 no.4
• /
• pp.131-140
• /
• 2020

Air pollutants emitted from chimneys of coal-fired power plants are considered to be a major source of fine particulate matter in the atmosphere. In order to manage fine particle in the chimney of a coal-fired power plant, it is necessary to know the concentration of fine particle emitted in real time, but the current system is difficult. In this study, a real-time measurement system for chimney fine particle was developed, and measurements were performed on six coal-fired power plants. Through the measurements, the mass concentration distribution according to the particle size could be secured. All six chimneys showed bimodal distribution, and the count median diameters of each mode were 0.5 and 1.1 ㎛. In addition, it was compared with the gravimetric measurement method, and it was determined that the relative accuracy for PM10 was within 20%, and the value measured using the developed measuring instrument was reliable. Finally, three power plants were continuously measured for one month, and as a result of comparing the concentration of PM10 according to the amount of power generation, it was confirmed that the PM10 discharged from the chimney increased in the form of an exponential function according to the amount of power generation.