• 제목/요약/키워드: Relative Length

검색결과 1,333건 처리시간 0.029초

한국 남해에서 출현하는 눈볼대(Doederleinia berycoides)의 식성과 영양단계 (Feeding Habits and Trophic Level of Blackthroat Seaperch, Doederleinia berycoides in the South Sea of Korea)

  • 김도균;김현지;이승종;백근욱
    • 한국어류학회지
    • /
    • 제34권3호
    • /
    • pp.172-178
    • /
    • 2022
  • 눈볼대는 중, 대형 외끌이 어업을 비롯한 기선저인망어업에 어획되는 대표적인 어종으로 생산금액 증가와 어획량, 수산식품 선호도를 보았을 때, 상업적인 가치는 더욱 높아질 것으로 판단된다. 해양생태계가 변화하고 있지만, 눈볼대 섭식생태에 관한 선행연구는 2004년부터 2008년까지 채집된 개체들을 대상으로 수행이 되어 추가 연구수행이 필요하다. 남해에서 저층트롤어업으로 채집된 눈볼대 701개체의 전장범위는 3.3~33.1 cm로 나타났으며, 공복률은 78.3%였다. 눈볼대의 주먹이생물은 어류였으며, 어류 중에서도 멸치가 가장 우점하였다. 눈볼대는 성장함에 따라 단각류, 새우류와 같은 갑각류에서 어류로 먹이생물의 전환이 이루어지는 것으로 관찰되었다. 먹이 섭식 특성의 경우, 개체당 먹이생물의 평균 중량 (mW/ST)은 성장함에 따라 지속적으로 증가했고, 평균 먹이생물의 개체수(mN/ST)는 감소하다가 증가하는 것으로 나타났다. 영양단계의 범위는 3.31±0.52~3.79±0.70으로 나타났으며, 평균 영양단계는 3.62±0.64로 나타났다.

보리 생식생장기의 수분부족이 수량 및 몇 가지 생리적 반응에 미치는 영향 (Grain Yield and Physiological Responses of Water Stress at Reproductive Stage in Barley)

  • 최원열;권용웅;박종환
    • 한국작물학회지
    • /
    • 제42권3호
    • /
    • pp.263-269
    • /
    • 1997
  • 보리는 생식생장기에 수분 스트레스에 민감하게 반응하여 수량에 크게 영향을 준다. 보리 5품종 (겉보리 : 밀양 1002, 올보리, 두루보리, 쌀보리: 백동, 맥주보리: 향맥)을 공시하여 생식생장기에 해당되는 출수전 20일, 출수전 10일 및 출수기에 각각 10일간씩 단수처리를 하여 한발을 유발하였으며 처리 후에는 관수를 하여 정상적으로 재배하였다. 보리 품종들을 10월에 포장에 파종하여 익년 2월에 대형 폿트에 이식하여 재배하였으며, 건물중, 유효경비을, 간장, 수량 및 수량 구성요소를 조사하였고, 유리 proline함량과 상대팽압도를 측정하였다. 1. 한발에 의한 피해는 출수전 10일>출수기>출수전 20일 처리의 순으로 나타났으며, 출수전 10일 처리구의 경우 대조구에 비하여 간장은 85∼98%, 주당수수는 52∼83%, 일수립수는 71∼86%, 천립중은 80∼84%, 그리고 10주당 수량은 60∼94%를 나타내었다. 2. 출수 10일전 단수처理에서 수량 및 수량구성 요소들의 감소율이 가장 컸고, 수량구성요소 중에 주당수수와 일수립수가 비교적 한해에 민감하게 반응하였다. 3. 올보리>밀양 1002ㆍ두루보리>향맥>백동의 순으로 내한성이 약하였다. 4. 한발처리를 끝낸 후에 다시 관수하여 지엽의 유리 proline함량의 감소율과 상대팽압도의 회복율을 품종별로 보면 피맥 3품종이 높고 백동과 향맥이 매우 낮았다.

  • PDF

모래지반에서 반복수평하중을 받는 말뚝의 영구변형 (Permanent Deformations of Piles in Sand Under Cyclic Lateral Loads)

  • 백규호;박원우
    • 한국지반공학회논문집
    • /
    • 제26권11호
    • /
    • pp.63-73
    • /
    • 2010
  • 해상풍력발전기의 기초로 사용되는 단말뚝은 풍력과 파랑하중에 의해 큰 크기의 반복수평하중을 받는다. 본 연구에서는 모래지반에서 반복수평하중을 받는 항타말뚝의 거동 특성을 조사하기 위해서 가압토조와 길이가 다른 3개의 모형말뚝을 이용해서 모형말뚝재하시험을 수행하였다. 실험결과에 따르면 하중의 최초 재하는 그 이후에 가해지는 반복재하보다 말뚝의 수평변위를 크게 발생시키고, 반복하중의 재하횟수가 증가함에 따라 1회 재하로 인해 발생하는 말뚝의 수평변위량은 감소하는 것으로 나타났다. 하중의 한방향 반복재하는 말뚝의 영구수평변위를 재하방향으로 증가시킨 반면, 양방향 반복재하는 최초 재하방향과 반대방향으로 말뚝의 영구수평변위를 증가시켰다. 그리고 반복 하중으로 인한 말뚝의 영구수평변위는 지반의 상대밀도가 감소하거나 말뚝에 가해지는 반복하중의 크기가 커질수록 급격히 증가하였고, 지반의 토압계수나 말뚝의 근입길이 변화에는 크게 영향을 받지 않았다. 또한 모형실험의 결과에 근거해서 하중이 한방향으로 반복재하될 때 말뚝의 영구수평변위와 영구회전각을 예측할 수 있는 산정식을 제안하였다.

인체에서 기혈(氣穴) 순환 회복을 위한 기혈테라피의 효과 탐색 (Exploring the Effect of Qihyul-therapy for Recovery of Qi Circulation in Body)

  • 김용필;이형환
    • 한국자연치유학회지
    • /
    • 제8권2호
    • /
    • pp.63-70
    • /
    • 2019
  • 목적: 본 연구의 목적은 둔부근육의 협착, 틀어진 체형, 어깨 통증이 있는 기혈순환이 나쁜 대상자들을 상대로 기혈테라피의 효과를 탐색하는 것이었다. 방법: 기혈테라피와 교정 기혈운동을 사용 하였다. 결과: 기혈테라피를 시술하기 전에 둔부 근육이 거의 움직이지 않았지만, 시술한 후에는 근육의 탄력이 회복되었고 회색으로 경화되었든 피부의 색상도 밝아지었고 항문 괄약근에도 힘이 생기었다. 대상자의 체형이 우측으로 -7°가량 틀어지면서 우측 팔이 좌측팔에 비해서 약 6 cm정도 길었었으나, 체형교정 후에는 우측 팔의 길이가 약 5 cm 정도 줄어들었고, 틀어졌던 체형이 거의 평형을 이루었다. 목 및 어깨교정 후에는 쇄골과 목의 간격이 7 cm로 간격이 넓어졌고, 승모근을 풀어준 후에는 10 cm로 넓어졌으며, 어깨통증이 많이 완화 되었다. 골반교정 후 둔부통증이 완화되었고, 고관절의 위치가 바르게 돌아왔다. 좌측으로 45°각도 틀어졌던 우측다리가 바르게 교정이 되었으며, 4 cm 정도 길었던 우측 다리의 길이도 좌우가 같아졌다. 둔부통증 및 무릎통증도 완화되었다. 골반교정 기혈운동 후에 대상자 1의 고관절의 위치가 바로 잡히어 좌측으로 45°각도 틀어졌던 우측다리가 바르게 교정이 되었고, 4 cm 정도 길었던 우측 다리의 길이도 좌우가 거의 같아졌다. 대상자2는 교정 전에는 무릎이 붙지가 않았고, 오른쪽 무릎이 왼쪽에 비해서 위로 5 cm 정도 올라갔었으며, 발목이 좌측에 비해서 30° 각도로 굽어져 있었는데, 교정 후에는 두 다리의 무릎이 안정되게 붙일 수 있게 되었고, 무릎의 높이도 같아 졌으며, 발목꺾임이 각도도 정상으로 교정이 되었다. 결론: 꾸준하게 기혈테라피와 척추교정 및 골반교정 기혈운동을 한다면 틀어졌던 체형도 바르게 회복되고, 아픈 통증도 완화되어 관련 질환들을 예방 및 치유하는데 효과가 있다고 본다.

터널막장안정 평가기법 및 막장볼트의 보강효과에 관한 수치해석적 연구 (A study on the evaluation method and reinforcement effect of face bolt for the stability of a tunnel face by a three dimensional numerical analysis)

  • 김성열;윤지선
    • 한국터널지하공간학회 논문집
    • /
    • 제11권1호
    • /
    • pp.11-22
    • /
    • 2009
  • 터널 굴착 대상지반의 강도 및 강성이 낮은 경우 막장안정성을 확보하기 위해 분할굴착공법 또는 적절한 보조공법을 병용한다. 본 연구에서는 기존 문헌을 중심으로 막장평가 기법에 대해 정리하고 보조벤치 병용 전단면공법 적용 시 지반의 변형 강도특성에 따른 막장보강의 필요성 유무와 보조공법으로 페이스볼트를 채택할 경우 타설 길이, 타설 밀도, 보강범위에 따라 막장 및 막장주변지반에 어떠한 영향이 발생되는지를 알아보기 위해 3차원 유한요소해석을 수행하였다. 막장 안정성에 대해 문헌에 의한 이론적인 평가기법과 FEM수치해석결과를 비교 분석한 결과 상대적인 차이는 있으나 막장볼트를 통한 막장안정의 효과에는 일치하는 경향을 보였다. 검토대상 지반조건에 대해 막장볼트의 타설형태는 길이 1.0D(D:터널 폭)이상, 격자상 타설(1개/$1.5\;m^2$), 상부 반단면 $120^{\circ}$ 보강시 가장 효과적인 것으로 분석되었다.

The gene expression programming method to generate an equation to estimate fracture toughness of reinforced concrete

  • Ahmadreza Khodayari;Danial Fakhri;Adil Hussein, Mohammed;Ibrahim Albaijan;Arsalan Mahmoodzadeh;Hawkar Hashim Ibrahim;Ahmed Babeker Elhag;Shima Rashidi
    • Steel and Composite Structures
    • /
    • 제48권2호
    • /
    • pp.163-177
    • /
    • 2023
  • Complex and intricate preparation techniques, the imperative for utmost precision and sensitivity in instrumentation, premature sample failure, and fragile specimens collectively contribute to the arduous task of measuring the fracture toughness of concrete in the laboratory. The objective of this research is to introduce and refine an equation based on the gene expression programming (GEP) method to calculate the fracture toughness of reinforced concrete, thereby minimizing the need for costly and time-consuming laboratory experiments. To accomplish this, various types of reinforced concrete, each incorporating distinct ratios of fibers and additives, were subjected to diverse loading angles relative to the initial crack (α) in order to ascertain the effective fracture toughness (Keff) of 660 samples utilizing the central straight notched Brazilian disc (CSNBD) test. Within the datasets, six pivotal input factors influencing the Keff of concrete, namely sample type (ST), diameter (D), thickness (t), length (L), force (F), and α, were taken into account. The ST and α parameters represent crucial inputs in the model presented in this study, marking the first instance that their influence has been examined via the CSNBD test. Of the 660 datasets, 460 were utilized for training purposes, while 100 each were allotted for testing and validation of the model. The GEP model was fine-tuned based on the training datasets, and its efficacy was evaluated using the separate test and validation datasets. In subsequent stages, the GEP model was optimized, yielding the most robust models. Ultimately, an equation was derived by averaging the most exemplary models, providing a means to predict the Keff parameter. This averaged equation exhibited exceptional proficiency in predicting the Keff of concrete. The significance of this work lies in the possibility of obtaining the Keff parameter without investing copious amounts of time and resources into the CSNBD test, simply by inputting the relevant parameters into the equation derived for diverse samples of reinforced concrete subject to varied loading angles.

수정된 직접 전단 시험기를 이용한 모래와 표면 돌출부를 갖는 플레이트 사이의 마찰 이방성에 대한 연구 (A Study on Friction Anisotropy between Sand and Surface Asperities of Plate Using Modified Direct Shear Test)

  • 이승훈;정성훈
    • 한국지반공학회논문집
    • /
    • 제38권2호
    • /
    • pp.29-38
    • /
    • 2022
  • 마찰 방향에 따른 전단 저항의 이방성을 지반 구조물에서 선택적으로 이용할 수가 있다. 예를 들어서, 축방향으로 하중을 가하는 깊은 기초, 소일 네일링, 타이백 등은 큰 전단 저항이 유발되므로 하중 전달 능력을 증가시키지만, 이와 반대로 말뚝 관입과 흙 시료 채취 등은 최소화된 전단 저항만 유발된다. 기존 연구는 뱀 비늘의 기하학적 형상과 유사한 표면 돌출부를 갖는 플레이트와 흙 경계면에서 유발되는 전단 저항 변화를 확인하였다. 본 논문에서는 표면 돌출부의 형상에 따른 경계면 마찰각의 변화를 정량적으로 평가하였다. 수정된 직접 전단 시험기를 이용하여 상대 밀도가 40%로 조성된 모래 시료에 대해 9개의 플레이트, 2개의 전단 방향(전단 시 돌출부 높이가 증가와 감소하는 방향), 그리고 3개의 초기 수직 응력(100kPa, 200kPa, 300kPa) 조건으로 총 51가지 경우를 실험 하였다. 실험 결과, 전단 응력은 돌출부 높이가 높을수록, 돌출부 길이가 짧을수록, 돌출부 높이가 증가하는 전단 방향에서 크게 나타났다.

Effect of partially replacing soybean meal with sunflower meal with supplementation of multienzymes on growth performance, carcass characteristics, meat quality, ileal digestibility, digestive enzyme activity and caecal microbiota in broilers

  • Yaqoob, Muhammad Umar;Yousaf, Muhammad;Imran, Safdar;Hassan, Safdar;Iqbal, Waqar;Zahid, Muhammad Umer;Ahmad, Naveed;Wang, Minqi
    • Animal Bioscience
    • /
    • 제35권10호
    • /
    • pp.1575-1584
    • /
    • 2022
  • Objective: An experiment was conducted to evaluate the effects of partially replacing soybean meal (SBM) with sunflower meal (SFM) with added exogenous multienzymes (MEs) on various biological parameters in broilers. Methods: One week-old, 400 broiler chicks were randomly divided into four treatments (control, 3SFM, 6SFM, and 9SFM) with 5 replicates/treatment (20 chicks/replicate). Control diet was without SFM and MEs, while diets of 3SFM, 6SFM, and 9SFM treatments were prepared by replacing SBM with SFM at levels of 3%, 6%, and 9%, respectively, and were supplemented with MEs (100 mg/kg). Feeding trial was divided into grower (8 to 21 day) and finisher phases (22 to 35 day). External marker method was used to measure the nutrient digestibility. At the end of trial, twenty birds (one birds per replicate) with similar body weight were slaughtered for samples collection. Results: No significant effect of dietary treatments was found on all parameters of growth performance and carcass characteristics, except relative weight of bursa. Weight (25.0 g) and length (15.80 cm) of duodenum were significantly (p<0.05) higher in 3SFM than control. Lowest (p<0.05) villus height/crypt depth ratio was found in 3SFM and 9SFM than control. Most of meat quality parameters remained unaffected, however, highest pH of breast meat (6.16) and thigh meat (6.44) were observed in 9SFM and 3SFM, respectively. Lowest (p<0.05) cook loss of thigh meat was found in 6SFM (31.76%). Ileal digestibility of crude protein was significantly (p<0.05) higher in 3SFM (72.35%) than control (69.46%). In addition, amylase (16.87 U/mg) and protease (85.18 U/mg) activities were significantly (p<0.05) higher in 3SFM than control. However, cecal microbial count remained unaffected. Conclusion: Partial replacement (up to 9%) of SBM with SFM, with added MEs can help to improve the nutrient digestibility, intestinal morphology, and digestive enzyme activities without affecting cecal microbial count and growth performance in broilers.

Biodegradable Film Decomposition Levels and Their Effects on Growth and Yield of Corn Crops

  • Ye Geon Kim;Hyun Hwa Park;Do Jin Lee;Yong In Kuk
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.52-52
    • /
    • 2022
  • Recently, PE (polyethylene) film has been used increasingly in com cultivation. However, PE films often cause soil and environment contamination. In order to reduce this problem, many researches have been carrying out studies on biodegradable films (BF) that are easily decomposed by soil microorganisms. Therefore, this study was conducted to determine which BF is optimal for growth and yield of com crops while also having the highest rates of film decomposition. BFs Farmsbio (Farm Hannong), Heulgro Film (Sejin Bio), Vonto Film (Eco-Hansung) as well as a selected PE film were used in this study. For the control, we used crops grown without any kind of mulching. Experimental fields were fertilized according to conventional cultivation methods, tilled, and then covered by either BF or PE. After 1 week, com (cv. MIBECK2ho) at the 3-leaf stage (16 days after seeding) was transplanted. Plant height was measured at 18 and 32 days after transplanting and heading stages. Yield components and yield were also measured at harvest. In addition, pH, EC, and decomposition and light transmittance levels of films were investigated during the experimental period. Daily average temperature, relative humidity and organic matter in soils were also measured during the experimental period. There was no significant difference in plant height, heading date, and silking between crops with BFs and PE, but the crops grown with BFs and PE films reached higher growth parameters in a shorter amount of time than the crops in the non-mulching control. Additionally, there were no significant differences in yield components such as length of ears, ear width, ear weight, and yield in crops that were grown using films or crops in the control plot. Light transmittance and decomposition levels of films generally increased with time after transplanting, and was highest in the Heulgro film than other BFs. Soil pH and organic matter in crops using BFs and PE films were significantly higher than in the control plot at 99 and 113 days after transplanting. In general, the EC contents in the control plot was lower than in crops using BFs and PE films. The average daily moisture in soil was higher when BFs and PE films were used than in the control plot. However, the daily average soil temperature was higher in crops using BFs and PE films than in the control plots at the beginning of the experimental period, but there was no consistent difference in soil temperature towards the later part of the experimental period. Therefore, the BFs used in this study were shown to be helpful without causing negative impacts on the growth and yield of com.

  • PDF

Effectiveness of a Clinical Pathway for Breast Cancer Patients Undergoing Surgical Operation on Clinical Outcomes and Costs

  • Jeong Hyun Park;Danbee Kang;Seok Jin Nam;Jeong Eon Lee;Seok Won Kim;Jonghan Yu;Byung Joo Chae;Se Kyung Lee;Jai Min Ryu;Yeon Hee Park;Mangyeong Lee;Juhee Cho
    • 한국의료질향상학회지
    • /
    • 제30권1호
    • /
    • pp.120-131
    • /
    • 2024
  • Purpose: This study aimed to evaluate the impact of implementing a clinical pathways (CPs) on the clinical outcomes and costs of patients undergoing breast cancer surgery. Methods: This retrospective cohort study included patients who were newly diagnosed with primary breast cancer at the Samsung Medical Center between 2014 and 2019 (N=8482; 2931 patients in the pre-path and 5551 patients in the post-path). Clinical outcomes included reoperation during hospitalization, readmission, and emergency room visits within 30 days of discharge. The cost data for each unit were obtained from an activity-based management accounting system. We performed an interrupted time series analysis. Results: The post-path period showed a significantly shorter hospital length of stay (LOS) than the pre-path period (6.3 days in pre-path vs. 5.0 days in post-path; -1.3 days' difference; p=.001), and fewer reoperations during hospitalization and within 30 days after discharge than the pre-path period. After adjusting for inflation rates and relative value scores, the model demonstrated savings of $146 per patient in the post-path for total costs, and $537 per patient for patient out-of-pocket costs (p=.001). Conclusion: CPs can help reduce costs without compromising the quality of care by reducing the number of reoperations, readmissions, and complications.