• Journal of Korea Water Resources Association
• /
• v.40 no.11
• /
• pp.899-908
• /
• 2007

In this study, wave reflection due to depression of seabed is calculated by using eigenfunction expansion method. The proper numbers of steps and evanescent modes needed for analysis are suggested by applying the eigenfunction expansion method to bottom topography of which slope or curvature varies. While satisfying shallow or intermediate water depth condition, the optimal figure of depression of seabed is obtained by calculating reflection coefficient for various depressions of seabed. The reflection coefficient with distance between the depression of seabeds is then calculated after arraying the optimal geometry in two and three rows.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1
• /
• pp.7-13
• /
• 2003

Numerous investigations have demonstrated that diffused reflection is one of the most important factors in predicting room acoustics by computer simulation. Recent studies have suggested several computational algorithms in order to account for diffused reflections in the ray tracing or beam tracing method. In this study, a computational algorithm for the calculation of diffuse sound reflections in the image method is suggested and a computer simulation system is developed based on the suggested algorithm. The methodology adopted in our computer simulation system is similar to the extended radiosity method, which is developed for the computer graphics. In a real room, sound energy is reflected in a partially diffused manner which results in four reflection combinations: diffuse-diffuse, specular-specular, diffuse-specular and specular-diffuse. In this study, higher order form factor is introduced to handle the four types of reflection combinations so that the partially diffused reflection could be modeled. In this paper, the concept of extended radiosity method is described and the approximate method of calculating higher order form factor is suggested. Finally, the effect of higher order form factors on the simulation of reverberation time is investigated.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.217-220
• /
• 2008

The reflection coefficients and the run-up heights affected by submerged structures are studied by using the numerical and the laboratory experimental methods. The three-point method is chosen to calculate the reflection coefficients in both the experimental and the numerical methods. The results of numerical simulations are shown a good agreement with laboratory measurements. The reflection coefficients increase and the run-up heights decrease when the rubble mound breakwater is defended by low-crested structures.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.285-293
• /
• 2000

In 1970's, the analysis of shallow substructure was the interests of geological engineering and environmental problems. And seismic refraction method was applied to detect those structures. From 1980's, digital electric industry is rapidly developed and high resolution prospecting equipment is supplied. And seismic reflection method is applied to achieve various data gathering and data analysis. In this study, geophysical prospecting method is applied to calculate the basic data of limestone yield production. Seismic shallow reflection method is used to detect the depth of bedrock and electrical resistivity method is used to detect of limestone layer boundary.

• Journal of Welding and Joining
• /
• v.19 no.1
• /
• pp.40-48
• /
• 2001

An ultrasonic test method, as a nondestructive test is applied to ensure the clad interface quality assessment. According to the reference codes and standards, not only korea Industrial Standard(KS) but also American Society for Testing and Materials (ASTM) Standard, ultrasonic examination procedures use the pulse-echo, A-scan, back reflection signal drop method and/or side drilled reference hole used to establish the acceptance criteria of clad material test. But the variety of bonding materials and sizes makes it difficult to produce the reference blocks, or thus the criteria. In order to overcome these practical difficulties, new ultrasonic testing criterion is suggested. In this new method, the theoretical interface reflection signal amplitude level is calculated and suggested as an acceptance criteria with the back reflection signal set to 100% FSH(Full Screen Height) which is based on acoustic impedance mismatch at the clad interface for the explosive clad ultrasonic inspection. Applicability of suggested criterion, for the explosive clad Fe-Naval Brass with different bonding quality is confirmed to the pre-existed KS and ASTM specifications and verified by using SEM (Seanning Electron Microscope) micrograph. The results obtained by the suggested method is more conservative than the results according to the KS B 0234 and ASTM A 578 specifications The suggested method could be applicable to any other combination of explosive clad ultrasonic inspection.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.12
• /
• pp.787-791
• /
• 2015

In this paper, the growing orientation of PMN-PT single crystal is analyzed using the Laue-Back Reflection Method. Two kinds of PMN-PT single crystals are grown using the Bridgman growing method in the [001] and [111] directions and their the Laue photographs are simulated assuming cubic crystal systems. From the comparison between simulation and test results, it can be concluded that the single crystals are grown in the desired crystal orientations.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.834-839
• /
• 2003

Previous research has been conducted on an ultrasonic wave reflection method that utilizes a steel plate embedded in the concrete to measure the reflection loss of shear waves at the steel-concrete interface. The reflection loss has been shown to have a linear relationship to compressive strength at early ages. The presented investigations continue this research by examining the fundamental relationship between the reflection loss, measured with shear waves, and the hydration kinetics of Portland cement mortar, represented by dynamic elastic moduli, compressive strength and degree of hydration. Dynamic elastic moduli are measured by fundamental resonant frequency and degree of hydration is determined by thermogravimetric analysis. The water/cement ratio was varied for the tested mixture compositions. The results presented herein show that compressive strength, dynamic shear modulus and degree of hydration have a linear relationship to the reflection loss for the tested mortars at early ages.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.2
• /
• pp.175-178
• /
• 2011

An optical fiber-based beam width measurement technique is presented. The proposed system can be applied to the optical fiber industry in applications such as lensed fiber, optical fiber based laser beam source, and fiber optic sensor. The measurement system is composed of optical fiber, which is used as a transceiver, and a single grating panel which consists of a multi-reflection area with an even non-reflection area. The grating panel is used to vary the reflected light. When the widths of the reflection area and non-reflection area are larger than the optical beam width, the reflected light is varied at the interface between the reflection area and the non-reflection area by the movement of the grating panel. Experiments were conducted in order to verify the feasibility of the proposed technique. Multi-mode fiber combined with a collimator was selected as an emitter and a receiver, and the beam width measurement system was contrived. Subsequently, the proposed method and the system were verified by comparing the experimental results with the results of the conventional charge-coupled device technique.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.2
• /
• pp.163-169
• /
• 2018

The present article discusses about the measurement techniques of acoustic impedance that becomes one of the important acoustic characteristics of various boundaries found inside of propulsion systems. Acoustic characteristics including acoustic impedance and reflection coefficient can be often assessed and estimated by use of the two-microphone method. Theoretical expressions of acoustic impedance and reflection coefficient measured in an impedance tube are presented for both cases with mean flow and without flow, and the practical application of the method through calibration is also provided. The acoustic impedance and the reflection coefficient are related with axial locations of microphones, thermodynamic characteristics of gas inside, and the transfer function between the pressure wave measurements at multiple locations.

• Journal of Korea Water Resources Association
• /
• v.35 no.5
• /
• pp.563-573
• /
• 2002

In this study, reflection of water waves over a train of rectangular submerged breakwaters is experimentally investigated. Measured reflection coefficients of regular waves are compared with predicted coefficients obtained from the eigenfunction expansion method. Although measured coefficients are slightly smaller than predicted ones, the overall agreement is very good.