• Journal of Satellite, Information and Communications
• /
• v.8 no.1
• /
• pp.23-30
• /
• 2013

In this study, we summarized the results of "Pre-study for the development of Polar route space radiation forecast model", funded by National Meteorological Satellite Center, Korea Meteorological Administration. We investigated the aviation space weather-related literature and the airline companies's operation manual associated with the space weather. We also identify the strengths and weaknesses of many pre-existing space radiation calculation programs, and find the potential to be improved. Until now, we don's have our own space radiation calculation program, so we need more improved space radiation calculation program which will be developed by ourselves. Currently most space radiation calculation programs cannot reflect temporary variations in the solar activities and the space weather. Here we analyzed the strengths and weaknesses of those programs, which are widely used in typical space radiation calculations. Finally to reflect the real-time space weather effects in the forecast model, we need to develop more precise forecast model. For that purpose, we suggest the following four steps: (1) at first, we have to choose the ground-based radiation dose calculation program, (2) we have to select a proper atmospheric model in aircraft altitude, (3) we combine the selected ground cosmic radiation dose calculation program and the selected atmospheric model, and finally (4)we have to reflect the real time space weather information and space weather forecast into the newly combined model.

• Journal of Korean Society of Transportation
• /
• v.35 no.6
• /
• pp.545-556
• /
• 2017

Various assessment indexes have been developed and utilized to evaluate the driver workload. However, existing workload assessment indexes do not fully reflect driving habits and driving patterns of individual drivers. In addition, there exists significant differences in the amount of workload experienced by a driver and the ability to overcome the driver's workload. To overcome these limitations associated with existing indexes, this study has developed a novel workload assessment index to reflect an individual driver's driving pattern. An average of the absolute values of the steering velocity for each driver are set as a threshold value in order to reflect the driving patterns of individual drivers. Further, the sum of the areas of the steering velocities exceeding the threshold value, which is defined as erratic steering area (ESA) in this study, was quantified. The developed ESA index is applied in evaluating the driver workload of manually driven vehicles in automated vehicle platooning environments. Driving simulation experiments are conducted to collect drivers' responsive behavior data which are used for exploring the relationship between the NASA-TLX score and the ESA by the correlation analysis. As a result, ESA is found to have the greatest correlation with the NASA-TLX score among the various driver workload evaluation indexes in the lane change scenario, confirming the usefulness of ESA.

• Economic and Environmental Geology
• /
• v.35 no.2
• /
• pp.137-147
• /
• 2002

Natural geological and environmental processes reflect to element abundances in geological materials on the surface. This study aims to elucidate a possibility of geostatistical application to differentiate geochemical anomalies affected by anthropogenic and geogenic factors. A regional geochemical map was produced using 'inverse distance weight interpolation' method for analytical results of stream sediments «150 11m) which were collected from 2,290 first- to second-order streams over the whole Gyeonggi Province. The Jurassic granitic batholith in the southeastern province was selected as a target for the geostatistical examination. Factor analysis was conducted using 22 elements for stream sediments from 445 drainage basins over the granitic body. Co, Cr, Sc, MgO, Fe$_{2}$O$_{3}$, V, and Ni were grouped with high correlation coefficients and the depletion of the components may reflect the whole-rock chemistry of the granite. Regression analysis was done using Co, Cr, and Sc as dependent variables and other six components as independent variables, and the results were drawn as maps. The maps acquired generally show quite similar distribution patterns with those of concentrations of each variable. The similarity in the spatial patterns between the two maps indicates that the application of regression statistics can be valid for the interpretation of regional geochemical data. However, some components show local discrepancies which may be influenced by secondary factors regardless of the basement lithology. The regression analysis may be effective in extracting local geochemical anomalies which may reflect rather anthropogenic pollutions than geogenic influences.

• Journal of Korean Public Health Nursing
• /
• v.14 no.2
• /
• pp.229-245
• /
• 2000

Previous studies have shown that five representative behaviors affect the health of adults in everyday life : smoking, drinking, exercise, nutrition, and stress. This study focuses on these five behaviors in an attempt not only to develop a program that promotes health, but also to suggest ways that such a program may be implemented to reflect diverse lifestyles. Our aim is to show how individual subjectivity influences behavior when making lifestyle choices that affect health. By analyzing individual characteristics, we tried to group people according to their common attitude and behaviors to promote health. We hope that this study may provide the fundamental data which may be used to assist professionals in promoting healthy behaviors among adults. In order to examine how subjectivity(e.g, personal opinions or attitudes) influences behavior, we prepared Q-statements which were composed of Q-samples for the study of human subjectivity. We polled forty-two adults and then analyzed the results using a PC qunal program. As a result, the respondents were classed according to six different types. Type One includes people who think managing stress is the most effective way to live a healthy life. They regard smoking and drinking as harmful behaviors. Type Two subjects, on the other hand, regard smoking and drinking as a matter of taste with few harmful effects. Although they recognize the importance of managing stress, they have a positive attitude towards smoking and regard nutrition as a minor factor in promoting their healthy lifestyle. Those classed as Type Three emphasize the necessity of exercise. They perceive drinking, smoking, and stress as harmful. People in this category seek to increase physical strength and to regulate all five health behaviors by keeping them in a normal range. Type Four consists of people who are indifferent to their health. While they seem to recognize the importance of regular exercise, they pay little attention to nutrition or to the harmful effects of smoking, drinking, and stress. They believe that exercise alone is sufficient to maintain their health. Type Five subjects believe drinking is not a harmful behavior at all. Rather. it has a positive effect on their mental health. They are characterized by this positive attitude towards drinking as well as by indifference toward nutrition (although they readily admit that good nutrition is important). Finally. those classed as Type Six have a positive attitude toward moderate drinking as a means to relieve stress. However. they also recognize the harmful effects of excessive drinking. They regard good nutrition as an important lifestyle choice but are indifferent toward exercise. This type is engaged in passive health management. This study devised six types or categories that reflect different attitudes toward promoting health in everyday life. It further went on to analyze the characteristics of each type. This study shows that programs designed to promote health must be modified to reflect the diversity of individual attitudes and patterns of behaviors.

• Journal of architectural history
• /
• v.27 no.2
• /
• pp.89-100
• /
• 2018

The stylobate for expanding the external stage area was the most frequently installed installment out of the installments installed for royal court ceremonies. The stylobate was installed for various ceremonies such as funeral rites, ancestral rites, customary formalities, state examination, feasts for celebrating a honored guest of the court, queen's silkworm cultivating ceremony, heir appointment, the presentation of honorary titles for the king or queen in honor of their merits, and entertainment of foreign dignitaries. The exact period stylobates came to be used for the play stage. The stylobate consists of the 紅座板, 屯太木, 竹欄間, 足木, and the 層橋. Depending on the 足木, the substructure of the stylobate, the stylobate could be divided into the 長足木, 中足木, 短足木, 平足木 type. The detail structure of the stylobate changed in form from the jokmok and duntaemok that appeared until the time of King Seonjo, into the 長屯太木, 短屯太木, and the 短短屯太木 during the time of King Heonjong. With the introduction of the 中足木, materials began to become more segmented and the structure stronger. According to existing records, while the height of the stylobate was not significantly high prior to King Seonjo's reign, the 十四層雲橋 and the 十三層層橋 introduced during the time of Emperor Gojong was designed to reflect his rank in external ceremonies while the eight story step bridge was exhibited in internal ceremonies to reflect the rank of Queen Mother Sinjeong. From here, we can deduce that the fourteen and thirteen story cloud bridges representing the king was of a higher grade than the eight story step bridge which represented the queen mother. Finishing by adding boards to the lower part of the stylobates began to appear in the time of King Seonjo. During King Heonjong's reign, the lower finish became gentrified with a thin board called 修粧板, and yeomupan 廉隅板 for decorating the edges of the stylobates were installed. Such style of finishing the lower part of the stylobate with boards mostly appeared in elaborate feasts 進饌 and celebrations 進宴 within the royal court 內宴. The stylobates appeared to have served not only practical purposes such as expanding the stage area, but also as installments which realize the authority and prestige of the royal crown. They were installed according to the purpose of the ceremony and the rank of the participant. In short, stylobates became established during King Seonjo's reign, became segmented and gentrified during King Heonjong's reign, and began to take height variations during Emperor Gojong's reign to reflect the rank and authority of the king and queen mother. As such, it can be considered another characteristic of Joseon Dynasty architecture.

• Journal of Science Education
• /
• v.33 no.1
• /
• pp.142-151
• /
• 2009

The purpose of this study is to investigate how much the programs of astronomy museums reflect the contents and objectives of current science curriculums. To attain the aim, comparison and analysis on the museum programs and science curriclum have been made. Five domestic astronomy museums have been selected. The contents and forms of their programs have been studied and appreciated by assessment instruments for astronomy museum programs. The assessment instruments were devised in consideration of both the science curriculums of the Ministry of Education(1997) and the achievement and evaluation criteria of the Korea Institute of Curriculum and Evaluation. The findings of this study are summarized as follows: The astronomy museums reflect most of the learning elements of science curricula concerning astronomy. These results indicate that the astronomy museum as an informal education institute is comparatively well connected to science education. The 5thgrade science curriculum reflected mostly on the museum programs, and too many of the astronomy museum programs were in forms of panel exhibition. Science curricula fared well but they failed to reflect the curricular objectives, which resulted in relatively low assessment scores. It is suggested that the findings of this study can be a foundation and act as guidance for selecting and developing astronomy museum programs which include the contents of the science curriculums more substantially.

• Journal of Intelligence and Information Systems
• /
• v.28 no.3
• /
• pp.119-137
• /
• 2022

Recent recommendation system studies apply various deep learning models to represent user and item interactions better. One of the noteworthy studies is ONCF(Outer product-based Neural Collaborative Filtering) which builds a two-dimensional interaction map via outer product and employs CNN (Convolutional Neural Networks) to learn high-order correlations from the map. However, ONCF has limitations in recommendation performance due to the problems with CNN and the absence of side information. ONCF using CNN has an inductive bias problem that causes poor performances for data with a distribution that does not appear in the training data. This paper proposes to employ a Vision Transformer (ViT) instead of the vanilla CNN used in ONCF. The reason is that ViT showed better results than state-of-the-art CNN in many image classification cases. In addition, we propose a new architecture to reflect side information that ONCF did not consider. Unlike previous studies that reflect side information in a neural network using simple input combination methods, this study uses an independent auxiliary classifier to reflect side information more effectively in the recommender system. ONCF used a single latent vector for user and item, but in this study, a channel is constructed using multiple vectors to enable the model to learn more diverse expressions and to obtain an ensemble effect. The experiments showed our deep learning model improved performance in recommendation compared to ONCF.

• Journal of the Korean Institute of Rural Architecture
• /
• v.25 no.2
• /
• pp.1-8
• /
• 2023

This study reveals the absence of standard design guidelines by region through investigation and analysis centered on public design cases by region in Jeollabuk-do and design elements that can reflect the integration, identity, and diversity of public design in each region by five regions. Through this, the following conclusions could be obtained. First, to improve the quality of street facilities in Jeollabuk-do, the design elements (design motif, color, pattern) applicable to the standard design were analyzed by dividing them into five regions. As a design motif, it was possible to extract patterns containing straight lines, sophistication, dignity, and smartness. In the Northeast region, it is comfortable with the motif of the mountain ridge reflecting geographical characteristics, and it can be extracted elements that contain warm and natural colors. In the southeastern region, patterns that reflect design elements were extracted by applying safe, lively, and peaceful colors with the design motif of curves that blend nature and agriculture. In the southwestern region, design pattern elements that highlight nature, history, and culture were extracted with various cultural assets and natural greenery as motifs. Lastly, in the Saemangeum region, the ocean flow and greenery could be used as a design motif to reflect a positive, clear, future-oriented image in the design spot zones by region. Second, based on the standard design elements (design motive, color, pattern) by region extracted for the standard design development of street facilities in each region in Jeollabuk-do, an integrated zone(Form, structure, material, color, functional element) to which regional design guidelines can be applied. Third, an integrated zone (form, structure, material, color, functional elements) was composed. In addition, design spot zones (patterns and colors in city and county units) that can contain the diversity and identity of each region were designated. By designating design spot zones (patterns and colors in city and county units) that can contain the diversity and identity of each region, standard design development plans (integrated pillars, jaywalking prevention fences, roundabouts (urban type, rural type), street trees) Eight standard designs, including protective covers, street planters, flat benches, light benches, visual media for user guidance, and parking zones for personal mobile devices) were presented.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.2
• /
• pp.1-14
• /
• 2024

The most optimal route-search algorithm thus far has introduced a method of applying node labels and link labels. Node labels consider two nodes simultaneously in the optimal route-search process, while link labels consider two links simultaneously. This study proposes a turn-label-based optimal route-search technique that considers two turns simultaneously in the process. Turn-label-based optimal route search guarantees the optimal solution of dynamic programming based on Bellman's principle as it considers a two-turn search process. Turn-label-based optimal route search can accommodate the advantages of applying link labels because the concept of approaching the limit of link labels is applied equally. Therefore, it is possible to reflect rational cyclic traffic where nodes allow multiple visits without expanding the network, while links do not allow visits. In particular, it reflects the additional cost structure that appears in two consecutive turns, making it possible to express the structure of the travel-cost function more flexibly. A case study was conducted on the metropolitan urban railway network consisting of transportation card terminal readers, aiming to examine the scalability of the research by introducing parameters that reflect psychological resistance in travel with continuous pedestrian transfers into turn label optimal path search. Simulation results showed that it is possible to avoid conservative transfers even if the travel time and distance increase as the psychological resistance value for continuous turns increases, confirming the need to reflect the cost structure of turn labels. Nevertheless, further research is needed to secure diversity in the travel-cost functions of road and public-transportation networks.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.233-238
• /
• 2000

The purpose of this study is to outline the analysis procedure for evaluating the performance of moment resisting steel frames. For this purpose, three ordinary moment resisting frames are designed in compliance to UBC 1994. The evaluation is performed by nonlinear static procedures using two analytical models. Only one analytical model using panel element can reflect the panel zone deformation explicitly. The limit values in FEMA 273 are used as guidelines of predicted demand parameters by which the performance of OMRFs may be assessed.