• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권6호
• /
• pp.546-553
• /
• 2008

Purpose: The purpose of this study was to estimate validity of posterior anterior cephalometric and 3D-CT for orbital canting analysis. Materials and methods: Three trained observers classified two patients group using standardized frontal photographs of facial asymmetry patients. Group A consisted of patients with facial asymmetry and orbital canting(n=19), and group B consisted of patients with only facial asymmetry(n=43). Orbital canting was measured with line of bilateral inferior orbitale. Orbital canting measurement was done with posterior anterior cephalometric and 3D-CT. Each horizontal reference line was established by bilateral GWSO(cephalometric), FZS(3D-CT). Maxillary canting and mandibular deviation angle were also measured and analyzed with orbital canting. Results: The mean orbital canting was $3.03{\pm}1.00^{\circ}$ in Group A and $1.11{\pm}0.76^{\circ}$ in Group B in frontal photograph. The mean orbital canting was $1.20{\pm}0.74^{\circ}$ in group A and $1.22{\pm}0.65^{\circ}$ in group B by cephalometric analysis(p>0.05). In 3D-CT, orbital canting was almost paralleled with horizontal reference line. The orbital canting, maxillay canting and mandibular deviation between two groups showed no significant differences except madibular deviation in 3D-CT. Conclusion: Common analysis of posterior anterior cephalometric and 3D-CT is not valide method to evaluate orbital canting for facial asymmetry patients with orbital canting.

• 대한가정학회지
• /
• 제34권5호
• /
• pp.183-196
• /
• 1996

The purposes of this study were to review the effects of textiles production on the environment, and to investigate the environmental consciousness and environmental preservation behavior of textile producers. This study was conducted by reference analysis and empirical research. To develope theoretical framework of dimensions of environmental behavior, references concerned were analyzed. And for empirical study, researcher developed a questionnaire based on the free writing by producers and references. The questionnaire included problems about environmental consciousness, environmental behavior, demographic variables, and environmental variables. 135 questionnaires were used for final data analysis. ANOVA and factor analysis were used. The results were as follows: First, the level of global environmental problem consciousness was relatively high. The conscious level of water pollution caused by the waste water from textile mills was the highest, and that of desertation of mountain caused by timber cutting was the lowest. The effects of textile dyers and finishers on the environment were the highest, and that of designers were the lowest. Second, the results of reference analysis showed that the dimensions of textile producers environmental behavior were resource and energy saving, solid waste reduction, and green product production. And the results of empirical study were resource and energy saving, resource reuse or recycling, solid waste reduction, and green product production, and total variances was 62.3%. The practice was the lowest. Third, global environment problem consciousness, environment problem consciousness caused by the textile life-cycle concerned, and clothing seperate-collection or not at residing place were effective on environmental behavior, and 52.45% of environmental behavior was explained with above variables.

• 에너지공학
• /
• 제24권1호
• /
• pp.58-68
• /
• 2015

상향식 모형을 이용하여 국내 주거부문의 온실가스 배출특성과 감축 잠재량을 도출하고 이를 바탕으로 한계감축 비용 분석을 수행하였다. 이를 위하여 먼저 상향식 모형의 필수 입력요소인 주거부문의 최종수요, 기준에너지시스템 (Reference Energy System; RES) 등을 정의하고 국내 통계데이터를 분석하여 필요한 활동량 데이터를 도출하였다. 기준 시나리오에서의 연도별 에너지 사용량 및 온실가스 배출량을 구하고 감축수단의 도입에 따른 감축잠재량 및 관련 비용을 분석하였다. 한계감축비용 분석 결과는 중장기적으로 부문별 온실가스 감축목표 달성을 위한 감축정책의 수립에 기여할 것으로 기대된다.

• 한국연소학회지
• /
• 제18권3호
• /
• pp.44-53
• /
• 2013

In this study, the economic evaluation for imported coals was conducted for power plant based on thermo-dynamical performance analysis. The number of coal types considered was 1,755 imported by five power generation companies in Korea during the 2010-2012. The higher heating value (HHV) of the coals ranged 4,000-6,500 kcal/kg, mostly sub-bituminous. The 1D thermo-dynamical performance modeling was performed for a 500 MWe standard power plant using PROATES code. It was founded that the low rank coals had negative effects on the plant efficiency mainly due to the increased heat loss by moisture, hydrogen and flue gas. Based on the performance analysis, the economic performance of the coals was evaluated. The apparent price of low-rank coals tended to be significantly lower than design coal; for example, the unit price of coal with a HHV of 4,000 kcal/kg was 57% of the reference coal having 6,080 kcal/kg. Considering the negative effects leading to a decrease in the thermal performance, heating value compensation, and increased parasite load, the corrected unit cost for the coal with 4,000 kcal/kg was 90.7% of the reference coal. Overall, the cost saving by imported coals was not high as expected.

• 농촌계획
• /
• 제4권2호
• /
• pp.128-137
• /
• 1998

The objective of this study is to approach on the spatial boundary of rural development protect by areal classification technique with spatial reference to searching of areal homogeneities in two hierachial administrative units, Ri Eup/Myun. In this study, a criterion for judging areal homogeneities is the degree of agriculture and urbanizing. Variables selected by these two criteria are analysed with the method of fator analysis. The results of areal analysis are as follows: first, generally, the importance of agricultural factors in areal analysis is getting less. Second, areal classification by Myun, Ri in Ansong City is revealed variously because of urban factors. Urban factors make areal heterogeneities become greater, Therefore urban factors are important when analyzing areal characteristics. Third, lately, in areas near by Chung- cheong Do and areas with bad road's condition, areal heterogeneities have been also getting greater. The results of analysis about areal characteristics of Myun and Ri are different from each other. In addition, urban factors are more influential on the areal characteristics than agricultural factors. Therefore, the establishment of rural development project for inindle spatial boundary between Myun unit and Ri unit is needed.

• Journal of Veterinary Science
• /
• 제22권6호
• /
• pp.66.1-66.9
• /
• 2021

Background: Maedi/Visna virus (MVV) is a contagious viral pathogen that causes considerable economic losses to the sheep industry worldwide. Objectives: In China, MVV has been detected in several regions, but its molecular characteristics and genetic variations were not thoroughly investigated. Methods: Therefore, in this study, we conducted next-generation sequencing on an MVV strain obtained from northwest China to reveal its genetic evolution via phylogenetic analysis. Results: A MVV strain obtained from Inner Mongolia (NM) of China was identified. Sequence analysis indicated that its whole-genome length is 9193 bp. Homology comparison of nucleotides between the NM strain and reference strains showed that the sequence homology of gag and env were 77.1%-86.8% and 67.7%-75.5%, respectively. Phylogenetic analysis revealed that the NM strain was closely related to the reference strains isolated from America, which belong to the A2 type. Notably, there were 5 amino acid insertions in variable region 4 and a highly variable motif at the C-terminal of the surface glycoprotein (SU5). Conclusions: The present study is the first to show the whole-genome sequence of an MVV obtained from China. The detailed analyses provide essential information for understanding the genetic characteristics of MVV, and the results enrich the MVV library.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4534-4550
• /
• 2022

Integrated severe accident codes should be capable of simulating not only specific physical phenomena but also entire plant behaviors, and in a sufficiently fast time. However, significant uncertainty may exist owing to the numerous parametric models and interactions among the various phenomena. The primary objectives of this study are to present best-practice uncertainty and sensitivity analysis results regarding the evolutions of severe accidents (SAs) and fission product source terms and to determine the effects of mitigation measures on them, as expected during a short-term station blackout (STSBO) of a reference pressurized water reactor (optimized power reactor (OPR)1000). Three reference scenarios related to the STSBO accident are considered: one base and two mitigation scenarios, and the impacts of dedicated severe accident mitigation (SAM) actions on the results of interest are analyzed (such as flammable gas generation). The uncertainties are quantified based on a random set of Monte Carlo samples per case scenario. The relative importance values of the uncertain input parameters to the results of interest are quantitatively evaluated through a relevant sensitivity/importance analysis.

• 분석과학
• /
• 제22권1호
• /
• pp.82-91
• /
• 2009

국내산 석회석을 이용하여 석회석 시료의 RRT 시험용 시료를 제조하여 XRF 및 습식 분석, ICP-OES를 이용한 기기 분석을 수행하였고 그 결과를 통계적 방법에 의하여 시료의 균질도를 평가하였다. 분석 결과 몇몇 시료의 경우 예상치 못했던 정규 분포로부터의 이상성이 발견되었으며 이상치를 제거한 후 측정한 모든 성분에 대하여 정규 분포 곡선에서 95% 신뢰 구간에서의 신뢰성 있는 표준 시료를 얻을 수 있었다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제7권2호
• /
• pp.36-40
• /
• 1993

본 논문에서는, 고조파 제거를 위해 PWM 기법을 사용할 때 회로의 구성이 복잡해지고, 제어가 어렵다는 단점을 개선하기 위하여 기준 신호와 부하의 기준 모델(Model)에서 유도된 궤환 신호를 폐루프 처리하여 비교함으로써 인버터의 게이팅 신호를 발생하는 MRA(Model Reference Adaptive)PWM 기법을 제시하였고, 제어기의 구성을 마이크로프로세서 및 아나로그 회로로 설계하였다. 일반적인 정현 PWM 기법을 사용했을 경우, PWM기법을 이용하여 전원에 대한 출력 전압의 비가 낮기 때문에 발생되는 전압 이용율 저하를 MRA PWM 기법을 이용하여 보상할 수 있었다. 또한 사다리꼴(Trapezoidal) 신호를 기준 신호로 사용함으로써 선전류의 저차 고조파를 줄일 수 있었으며, 비교적 간단한 수식을 이용하여 실시간 계산(On-line computation)으로 스위칭 패턴을 발생하였다.

• 분석과학
• /
• 제23권1호
• /
• pp.83-88
• /
• 2010

대검찰청 마약감식실은 대마 흡연여부를 판별하는 수단인 소변 중 대마 대사체 성분 분석법 에 대한 신뢰도 평가를 위하여 인증표준물질을 이용한 시험을 실시하였다. 시험에 사용된 인증표준물질은 미국 NIST에서 판매하는 Standard Reference Material 1507b로, 11-nor-${\Delta}^9$-tetrahydrocannabinol-9-carboxylic acid (THCCOOH)가 함유된 냉동 건조 소변이었다. NIST에서 구매한 인증표준물질의 농도값과 실험실에서 측정한 농도값을 비교 평가해 본 결과, 약 95% 신뢰수준에서 일치하였다.