• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.141-146
• /
• 2005

Ship have cutout inner bottom and girder and floor etc. Ship's structure is used much, and structure strength must be situated, but establish new concept when high stress interacts sometimes fatally the area. There is no big problem usually by aim of weight reduction, a person and change of freight, piping etc. Because cutout's existence grow up in this place, and, elastic buckling strength by load causes large effect in ultimate strength. Therefore, stiffened perforated plate considering buckling strength and ultimate strength is one of important design criteria which must examine when decide structural concept at initial design. Therefore, and, reasonable buckling strength about perforated stiffened plate need to ultimate strength limited design . Calculated ultimate strength varied several web height and cutout's dimension, and thickness in this investigated data. Used program(ANSYS) applied F.E.A code based on finite element method.

• Journal of Life Science
• /
• v.15 no.6 s.73
• /
• pp.941-947
• /
• 2005

The contamination frequency of major foodborne pathogenic bacteria was investigated from 213 seafood samples including sliced raw fish and shellfish in Busan and CyeongNam province area. Tested microorganisms were Salmonella spp. Staphyloroccus aureus, Vibrio parahaemolyticus, Escherichia coli O157:H7, Bncillus cereus, Listeria monocytogenes and Campylobacter jejuni. The frequency of isolated microorganisms was V. parahaemolyticus (30.5%), B. cereus (9.9%), S. aureus (3.8%) and other pathogenic bacteria (1.4%). from July to October, total isolation rates were greater than 50% and V. parahaemolyticus was dominant among the microorganisms isolated. The bacteria isolation rate (49.2%) in raw seafoods including shellfishes was higher than one (28.9%) in sliced raw fish. V. parahaemelyticus isolates were resistant to ampicillin (96.9%), amikacin (29.2%) and tetracycline (27.7%), and B. cereus isolates were resistant to ampicillin (100%), Penicillin G (100%), rifampicin (71.4%) and tetracycline (14.3%). The growth of V. parahaemolyticus and B. rereus was greatly inhibited below $10^{\circ}C$, but increased at ambient temperature. Washing seafood with tap water showed to reduce total count of remaining V. parahaemolyticus. Thus temperature control under $10^{\circ}C$, sufficient washing and prompt eating appeared to reduce the risk of food poisoning by these bacteria in seafoods.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.278-284
• /
• 1998

This paper describes a l0b CMOS A/D converter (ADC) for HDTV applications. The proposed ADC adopts a typical multi-step pipelined architecture. The proposed circuit design techniques are as fo1lows: A selective channel-length adjustment technique for a bias circuit minimizes the mismatch of the bias current due to the short channel effect by supply voltage variations. A power reduction technique for a high-speed two-stage operational amplifier decreases the power consumption of amplifiers with wide bandwidths by turning on and off bias currents in the suggested sequence. A typical capacitor scaling technique optimizes the chip area and power dissipation of the ADC. The proposed ADC is designed and fabricated in s 0.8 um double-poly double-metal n-well CMOS technology. The measured differential and integral nonlinearities of the prototype ADC show less than ${\pm}0.6LSB\;and\;{\pm}2.0LSB$, respectively. The typical ADC power consumption is 119 mW at 3 V with a 40 MHz sampling rate, and 320 mW at 5 V with a 50 MHz sampling rate.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.44-55
• /
• 2013

Intelligent transportation systems allow us to have valuable opportunities for collecting reliable wide-area coverage traffic and weather data. Significant efforts have been made in many countries to apply these data. This study identifies the critical points for classifying rain intensity by analyzing the relationship between rainfall and the amount of speed reduction. Then, traffic prediction performance by rain intensity level is evaluated using relative errors. The results show that critical points are 0.4mm/5min and 0.8mm/5min for classifying rain intensity (slight, moderate, and heavy rain). The best prediction performance is observable when previous five-block speed data is used as inputs under normal weather conditions. On the other hand, previous two or three-block speed data is used as inputs under rainy weather conditions. The outcomes of this study support the development of more reliable traffic information for providing advanced traffic information service.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.416-429
• /
• 2012

This study was to assess the effects of a recovery oriented integrated rehabilitation program on cognitive social function, rehabilitation motivation, and mental health recovery. This program is involved motivation enhancement program with 4 subprograms composed of cognitive rehabilitation, emotion management, vocational rehabilitation, family education program. The subjects were 34 patirents with schizophrenia who had been hospitalized at National Mental Hospital on local area. The study was a non-equivalent control group non-synchronized design with two groups, an experimental group(18 patients) and a control group(16 patients). The collected data were analyzed using SPSS 12. 0. The results of the data show that there was not a significant increase in the symptom, cognitive and social function. But there was a significant increase in readiness of rehabilitation(maintenance, p=.027) and mental health recovery (p=.039). Short term recovery oriented integrated rehabilitation programs in inpatient settings are more available for motivation of rehabilitation and mental health recovery than symptom reduction or functional improvement. Therefore there should be more efforts to create more recovery oriented service provision in clinical settings.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.320-328
• /
• 2014

Biodiesel has very similar physical properties (density, kinematic viscosity) and has even higher cetane number compare with conventional diesel. There are no necessity to change or modify the infra-structure & engine system. It is known that fatty acid methyl ester (FAME) is oxygen-contained components increasing the combustibility, biodegradability and reduced the exhaust harmful gas. These things made the biodiesel more popular as an alternative diesel fuel. But biodiesel's sources are controversial issues about $CO_2$ reduction effect at this time because those mainly come from edible plants such as soy, palm, rapeseed already spent lot of $CO_2$ to cultivate. Whereas micro-algae is focused because they are inedible and has rapid growth rates & high carbon-dioxide adsorption rate per area. In this study, we analyze the each FAME components using $GC{\times}GC$-TOFMS in stead of GC-FID and verify the previous total FAME contents method's applicability through the micro algal biodiesel derived from Dunaliella tertiolecta.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.55-63
• /
• 2010

Although the environmental conflicts regarding noise and vibration are continually increasing during construction, noise and vibration occurring in construction are only managed in construction phase. Noise and Vibration occurring in construction are considered to be insufficient, so we find that noise and vibration management in design phase has to be operated for reducing. The objective of this paper is to present noise and vibration management lists to consider in design phase for enhancing efficiency in noise and vibration management and to develop the appraisal sheets for designers to evaluate and the manuals to easily use management lists. To achieve this, we identify the noise and vibration management lists to consider in design phase through analyzing the previous literatures and confirm the 9 lists through conducting a research with experts in environmental area for verifying the propriety of lists. Also, this study applies to AHP technique to identify the priority and the weight evaluation among the lists. Through this study, we identify the most efficient lists, including from the low noise and low vibration methods, the noise and vibration reduction by blasting works, the installment and the arrangement of noise and vibration control equipments, for noise and vibration management in design phase. The achievement of this study will help to prevent the environmental disputes and conflicts in advance and will consider utilizing for the successful construction project.

• Journal of the Korea Society for Simulation
• /
• v.15 no.1
• /
• pp.77-85
• /
• 2006

The cost of downloading content from the Internet may be costly for mobile device users using its 3G connection, because the 3G connection cost to download data from the Internet is a function of the amount of data downloaded. This paper introduces an approach in which mobile devices, called peers, form an ad hoc network and share their downloaded content with others. As an example, spectators may want to collect/share information about players and game records in a stadium. In an art gallery, visitors may want to retrieve some background information about the displayed work from the nearby ad hoc network. In an outdoor class, a teacher may download today's topic files from the Internet, and all students may share the content with minimal or no cost paid. This is possible if mobile device has both a 3G interface and a wireless LAN interface. If the peers want to improve privacy md discourage traffic analysis when sharing content, this paper describes a low-delay anonymous connection between the sending peer and the receiving peer using two additional peers. Simulation results show that the transmission time overhead of the anonymous connection may increase 50% or less as the number of peers increase or the peers are scattered over the larger area.

• Information Systems Review
• /
• v.7 no.2
• /
• pp.257-276
• /
• 2005

The most distinctive characteristic in Maeil's outsourcing strategy was the rapid decision process done by CEO. At first, Maeil made a contract with a outsourcing vendor based on 50% investment for 5 years. However, 3 years later Maeil changed their outsourcing strategy from 10% share to 100% outsourcing. This is for the efficiency improvement and cost reduction. Also, Maeil organized separate TFT which could control IS quality. This TFT reviewed the feasibility of requirement analysis and IS planning process. Through this cooperation between TFT and the outsourcing vendor, Maeil could get the stable IT development and operation. During last 5 years, Maeil achieved great performance in the area of IT development and operation from the outsourcing. The present issue related to outsourcing strategy is whether Maeil will continue the current contract or change the vendor due to the anxiety of becoming a captive customer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.1
• /
• pp.78-82
• /
• 2005

Display manufacturing process has adopted RCA cleaning, applying to larger area and coping with environmental issue for last ten years. However, the approaching concept of ozonized, hydrogenised, or electrolyzed water cleaning technologies is within RCA clean paradigm. In this work, only electrolyzed anode water was applied to clean particles and organics as well as metals based on Pourbaix concept, and as a test vehicle, MgO particles were introduced to prove the new concept. The electrolyzed anode water is very oxidative with high oxidation reduction potential (ORP) and low in pH of more than 900 mV and 3.1, respectively. MgO particles were immersed in the anode water and its weight losses due to dissolution were measured with time. Weight losses were in the ranges of 100 to 500 micrograms in 250 ml anode water depending on their ORP and pH. Therefore it was concluded that the cleaning radicals in the anode water was at least in the range of 1 to $5{\times}10^{20}$ ea per 250 ml anode water equivalent to $1{\times}10^{18} ea/cm^2$. Hence it can be assumed that the anode water applied to display cleaning from now on $1{\times}10^{10}$ to $1{\times}10^{15} ea/cm^2$ ranges of contaminants are being treated. In addition, it was observed that anode water did not develop micro-roughness on hydrophobic surface while it did on the native silicon oxide.