• Korean Journal of Veterinary Service
• /
• v.33 no.1
• /
• pp.81-87
• /
• 2010

This study was based on a survey of 100 sows which were raising in Jeonnam province for 11 months, from February to December 2008 in order to evaluate the medicinal herbs supplementation in sows on the effects of mortality in suckling pigs, and milk quality of sows. The medicinal herbs were supplemented in the feed of sows from 1 weeks before the expected date of delivery to 10 days after the delivery. As comparing stillbirth rate, test group was reduced 9.05%, and control group, 17.37%. It was certain that the medicinal herbs was very effective for reducing stillbirth rate. In comparison of mortality rate of suckling pig, test group was decreased by 1.52% as compared with control group. In analysis of milk components of sows, milk fat was 6.04% in test group and 5.22% in control group. Milk protein contents of test group and control group were 18.06% and 18.36%, respectively, showing no significant differences between two groups. Milk sugar contents showed also no difference between two groups. By milk somatic cell counts, test group ($582{\times}10^3$cells/ml) was found decreased number of milk somatic cell as compared with control group ($688{\times}10^3$cells/ml). These results imply that the medicinal herbs supplementation in sow might be effective for preventing stillbirth and mortality in piglets and mastitis in sow.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.838-845
• /
• 2006

Recently construction work in Korea, demands of favorable condition ground had been increased with industrialization acceleration and economic growth. However, because of limited land space, it was so hard to ensure favorable condition grounds that construction work proceeds until soft ground area on plans of road, railroad and industrial complex. In this case, soft ground improvement was required such as a stone column method. Stone column method, making a compaction pile using crushed stone, is a soft ground improvement method. However, stone column method is difficult to apply to the ground which is not mobilized enough lateral confine pressure because no bulging failure resistance. Hence, in present study, evaluates the stone columns reinforced by geogrid for settlement reduction and wide range of application of stone columns. Triaxial compression tests were conducted for evaluation which is about behavior characteristics of stone column on replacement rate. Then, 3-dimensional numerical analysis were conducted for application of stone column reinforced by geogrid as evaluate behavior characteristics and settlement reduction effect of stone column reinforced by geogrid on reinforcing depth change of geogrid.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.27
• /
• pp.165-181
• /
• 2005

The health industry of China is faster than before, so it will be rank 5th at world-wide markets in 2010. Firstly, the custom tariff was lower at 15% in 2000 and at 10.4% on June 2005. And, it will be lower into 9.8% in 2010. Secondly, this is because of expansion of purchase power on increase in economic growth, extended human life expectancy. As it is entered the WTO in January 2002, it will positively affect on export of Korea for China. This paper focuses on the analysis of export increase caused by reduction of custom tariff in China. As above mentioned, the time schedule on average reduction of custom tariff was 15% in 2000, 10.4% in 2005. Then, it will be lower into 9.8% in 2010. As the empirical test related health industry, it presents 19.80% export increase rate for China of Korea on reduction of custom tariff from 2001 to 2010. The exporting of drug for China will be up to 17.85% for 10 years. Also, the exporting of Biomedical will be up to 20.99%, and respectively 22.95%, 22.60% in Cosmetics and food industry. Conclusionally, the exporting of this health industry will be increase greatly, compared with any other industries. So, it is necessary that firms increase in R&D investment and government support as policy for health industry.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.5 no.3
• /
• pp.207-216
• /
• 1993

Experimental investigations have been carried out to find the effect of drag reduction caused by effective polymer additives in turbulent flows. The experiments were undertaken with a test section of 9.8mm pipe diameter and 3500 mm pipe length(L/D=357) in a closed loop, and Copolymer-X and Polyacrylamide(PAAM) were used as polymer additives for comparisons. The tests were carried out under different polymer concentrations, and the temperatures of the flow considered were $26^{\circ}C$, $60^{\circ}C$ at the flow velocity of 5.3 m/s. The rate of drag reduction obtained by Copolymer-X is found to be considerably higher than that of PAAM in turbulent flows. Copolymer-X is also found to be very reliable for mechanical degradation, which has not been the case in any other additives. It is concluded that Copolymer-X is considered to be one of the most effective agents as an additive especially for long time hydraulic transports. It is also found that polymer degradation in more likely at lower polymer concentrations in the turbulent flows.

• Journal of Radiation Protection and Research
• /
• v.37 no.2
• /
• pp.103-107
• /
• 2012

This paper analyzes changes in the external radiation dose rate of PET-CT test patients as a part of providing basic materials for reduction of radiation exposure to PET-CT test patients. In theory the measurement of external radiation dose rate of PET-CT test patients shows that the further the distance from the patient injected with radioactive pharmaceutical and a longer time elapsement from the injection leads to a smaller amount of radiation. Particularly, the amount of radiation marked the highest in the chest was at 4.17 minutes immediately after the intravenous injection and in the head after 77.47 minutes after urination in advance to the PET-CT test. As in the generalized information, it is desired to keep distance between the patient and caretakers or professionals to reduce the amount of radiation exposure from PET-CT test patients and to resume contact the patient after the time when the radiation has reduced. If contact is unavoidable, it is desired to keep at least 200cm from the patient. In addition, the amount of radiation reached the highest in the chest at first and then in the head from 77 minutes after injection. Accordingly, it would be helpful in achieving the optimization if contact is made based on the patient's physical characteristics. This study is significant as it measures changes in radiation the dose rate by; distance from the PET-CT test patient, time elapsed, and specific parts of body. Further studies based on the findings in this paper are required to analyze changes in radiation dose rate in accordance with individual characteristics unique to PET-CT patients and to utilize the results to reduce the amount of radiation patient, caretakers and professions are exposed.

• Journal of Mechanical Science and Technology
• /
• v.14 no.2
• /
• pp.152-158
• /
• 2000

The contents of this paper include the evaluation of corrosion characteristics and the behaviour of stress corrosion cracking (SCC) for the weldment and post weld heat treatment (PWHT) specimen and parent of HT -60 steel using a slow strain rate test (SSRT) in synthetic seawater. Corrosion characteristics were obtained from the polarization curves by potentiostat, and SCC phenomena were evaluated through the parameters such as reduction of area and time to failure by comparing the experimental results in corrosive environment with those obtained in air. Corrosion rate of the weldment was the fastest, followed by parent and PWHT specimen. SCC phenomena between the weldment of HT-60 steel and synthetic seawater were shown. Besides, SCC was dependent upon the pulling speed greatly. Maximum severity of SCC was obtained at a speed of $10^{-6}mm/min$, whereas SCC could not be seen almost at $10^{-4}mm/min$. The resistance to SCC for PWHT specimen was improved considerably compared that of the weldment at $10^{-6}mm/min$. In case of SCC failure, it was verified from SEM examination that brittle mode and lots of pits could be seen at the fractured region near the surface of the specimen.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.255-265
• /
• 2017

We have determined the optimal pumping rate of the PW-2 water well (depth=100 m) at Imgokri, Sangju City. Cutting analysis and geophysical logging data reveal water-producing horizons at 26.1-26.5, 28.0-30.0, 33, 58, and 71 m. For pumping rates of 40, 55, 70, 90, and $132m^3/d$ over 70 days, the estimated drawdown from the PW-2 well was 6.48, 11.56, 18.07, 28.99 and 60.26 m, respectively. During a constant-rate pumping test at a rate of $117m^3/d$, the cone of depression intersected an impermeable boundary after 120-150 min of pumping. Therefore, we consider the critical pumping rate for well PW-2 to be $90m^3/d$. After pumping at $90m^3/d$ for 70 days, the calculated drawdown was 28.82-31.27 m. We suggest an optimal pumping rate for well PW-2 of $70-90m^3/d$, as the optimal pumping rate should be similar to the critical pumping rate. Sharp increases in the slope of the time-drawdown relationship, dissolved oxygen concentrations, and oxidation-reduction potential during the constant-rate pumping test indicate the limited development of bedrock aquifers around PW-2.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.463-468
• /
• 2002

For the Externally bonded FRP systems, flexural design method is studied focusing on the reinforcement layer of the carbon fiber sheets. As the FRP layer is added, strengthening rate increases, but not proportionally as the FRP layer increases. This is reflected in the design formula appropriately by the bond cofficients from the added layers. As the number of FRP layer increases, the stress reinforcement and FRP sheet decreases, and it generally corresponds to the decrease rate of member flexural strength. This phenomenon is appearing indentically in a design formula and experimental result. The rate of $M_{test}$ and $M_n$ is 1.19 and it is estimated as safety factor which is the reduction factor, ${\psi}_f = 0.85$.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.2
• /
• pp.95-102
• /
• 2012

The objective of this research was to experimentally test the effect of rice straw mats on the reduction of runoff, sediment discharge and turbidity under a laboratory scale. We used the small runoff plots of 1 m ${\times}$ 1 m ${\times}$ 0.65 m ($L{\times}W{\times}H$) in size filled with loamy sand. Experimental treatments were bare (control), rice straw mat cover of straw mats + PAM + Gypsum (SPG), rice straw mats + Chaff + PAM + Gypsum (SCPG) and rice straw mats + Sawdust + PAM + Gypsum (SSPG); slope of 10 % or 20 %; and rainfall intensity of 30 mm/hr. Runoff volume and rate of covered plots were significantly lower than those of control plot. Average runoff rate of covered plots, slope of 10 % and 20 %, decreased 85.6 % and 72 % in respectively. Sediment reduction ratio was more than 99 % regardless of slope. The differences runoff and sediment discharge among different cover materials were not significant. It was also shown that even if runoff reduction by surface cover were low, sediment discharge reduction could be very significant and contribute to improve the water quality of streams in sloping agricultural regions. It was concluded that the use of straw mat and soil amendments (PAM and Gypsum) on sloping agricultural fields could reduce soil erosion and muddy runoff significantly and help improve the water quality and aquatic ecosystem in receiving waters. But mixing effect of PAM and Gypsum was minimal.

• Clean Technology
• /
• v.9 no.2
• /
• pp.71-79
• /
• 2003

The selective catalytic reduction (SCR) process is the most widely applied technology for the denitrification of coal-fired power plant flue gases due to its selectivity and high efficiency. In order to attain the optimum design of SCR process, it is required to consider various catalysis characteristics as well as various operating conditions. A systematic study to elucidate the effects of the design conditions(reaction temperature, $NH_3/NO$ mole ratio, space velocity and linear velocity) on the reduction of NOx using the SCR pilot plant with maximum flue gas flow rate of $1,000Nm^3/hr$ was carried out and employed to identify the optimum design parameters. Design approaches of SCR process with test results were also presented.