• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.3
• /
• pp.466-471
• /
• 2012

In this paper, we consider the problem of a robust passive filtering with low-order for discrete-time singular systems with polytopic uncertainties. A BRL(bounded real lemma) for robust passivity with a dissipativity of discrete-time uncertain singular systems is derived. A low-order robust passive filter design method is proposed by new reduced-order method and LMI(linear matrix inequality) technique on the basis of the obtained BRL. Finally, illustrative examples are presented to show the applicability of the proposed method.

• Journal of Communications and Networks
• /
• v.12 no.3
• /
• pp.209-215
• /
• 2010

In an asymmetrical speed channel environment like asymmetric digital subscriber line, the up-link bandwidth is normally smaller than the down-link bandwidth, which will lead to extremely low utilization of down-link bandwidth when current P2P video transmission is applied. To overcome this, a new fast P2P video transmission method applied in an asymmetrical speed channel environment is proposed in this paper. On the basis of the many-to-one concept, the proposed method uses a new multipeer aggregation technique to enhance the utilization of down-link bandwidth. In addition, an adaptive peer assignment algorithm is also introduced in order to minimize the overall transmission time. Experimental results show that by using our proposed method, the utilization of down-link bandwidth is significantly improved, and the overall transmission time is greatly reduced.

• Steel and Composite Structures
• /
• v.29 no.6
• /
• pp.785-802
• /
• 2018

In this paper, two different computational methods, called Rayleigh-Ritz and collocation are developed to estimate the ultimate strength of composite plates. Progressive damage behavior of moderately thick composite laminated plates is studied under in-plane compressive load and uniform lateral pressure. The formulations of both methods are based on the concept of the principle of minimum potential energy. First order shear deformation theory and the assumption of large deflections are used to develop the equilibrium equations of laminated plates. Therefore, Newton-Raphson technique will be used to solve the obtained system of nonlinear algebraic equations. In Rayleigh-Ritz method, two degradation models called complete and region degradation models are used to estimate the degradation zone around the failure location. In the second method, a new energy based collocation technique is introduced in which the domain of the plate is discretized into the Legendre-Gauss-Lobatto points. In this new method, in addition to the two previous models, the new model named node degradation model will also be used in which the material properties of the area just around the failed node are reduced. To predict the failure location, Hashin failure criteria have been used and the corresponding material properties of the failed zone are reduced instantaneously. Approximation of the displacement fields is performed by suitable harmonic functions in the Rayleigh-Ritz method and by Legendre basis functions (LBFs) in the second method. Finally, the results will be calculated and discussions will be conducted on the methods.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.123-131
• /
• 2012

As the price of traditional fuels soar, the alternatives are becoming more viable. And manufacturers are promoting the growing viability of electric and biofuel-powered vehicles through longer warranties. Now, these longer green environment (emission)warranties, sometimes called extended warranties or "super warranties," have been adapted. The main result of this paper is to present a new method to approximate a bivariate warranty function by using Radial Basis Function Network with application of Radon Transform and its inverse which is used to reduce the dimension of the warranty space. This method consist of the following stages: First, by using the Radon Transform, the bivariate warranty function can be reduced to one dimensional function. Second, each of the one dimensional functions is approximated by using neural network technique into neural sub-networks. Third, these neural sub-networks are combined together to form the final approximation neural network. Four, by using the inverse of radon transform to this final approximation neural network we get the approximation to the given function. Also, we apply the above method to some green warranty data of automotive vehicle company.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.330-337
• /
• 2018

This paper proposes a technique to analyze the flatness characteristics of the attenuator at 10Hz to $50\text\tiny{MHz}$ on the basis of $1\text\tiny{kHz}$ using a Thermal Voltage Converter and AC measurement standard. In the proposed technique, the input voltage of the attenuator for each measuring frequency is supplied at the same rate as $1\text\tiny{kHz}$ using TVC, and the flatness characteristics of the attenuator are analyzed by the voltage variation indicated in the AC measurement standard. The results of the analysis of the attenuator flatness characteristics show that the maximum uncertainty of $866{\mu}V/V$ can be measured from $10\text\tiny{dB}$ to $70\text\tiny{dB}$ and the uncertainty is reduced by about 37% compared to $2.31\text\tiny{mV}$/V using the network measurement method. The improved attenuator flatness characteristic values can be applied to the frequency flatness calibration from 2.2V to 2.2mV at the low voltage of the AC measurement standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5C
• /
• pp.555-560
• /
• 2003

For synchronous direct sequence-code division multiple access (DS-CDMA) systems, the authors propose an adaptive radial basis function (RBF) receiver with suboptimal structure that reduces not only the complexity with regard to the number of centers but also the quantity of instructions required per one bit reception. The proposed receiver is constructed with parallel RBF networks. Each RBF network has the same procedure as the conventional RBF receiver. The performance of each RBF network is affected by interferences which are assigned to the other RBF networks because neither RBF network uses the full user set. To combat these interferences, the partial IC technique is employed. Monte Carlo simulations over additive white Gaussian noise (AWGN) channels confirm that the proposed receiver with its reduced complexity is able to obtain near-optimum performance. Moreover, the proposed receiver is able to properly cope with a various environment.

• Journal of KIISE:Software and Applications
• /
• v.31 no.1
• /
• pp.29-42
• /
• 2004

According to rapid growth of a web environment, usage-centered design is being highlighted. This paper suggests the development step and algorithm to generate a user interface prototype automatically on the basis of usage-centered design. For this purpose, The transition object of the user interface is modeled from requirement analysis, and an modeling rule as well as algorithms of business events are made for the creation of the user interface. Through these processes, visual cohesions of business events become strong and unskilled designers can develop the qualified user interface prototypes. A user's understanding of business tasks can also be improved and prototype iterations reduced.

• Steel and Composite Structures
• /
• v.35 no.1
• /
• pp.29-41
• /
• 2020

Cross-beams of modern through truss bridges are connected to truss chord at its nodes and between them. It results in variable rotational end restraint for cross-beams, thus variable bending moment distribution. This feature is captured in three-dimensional modelling of through truss bridge structure. However, for preliminary design or rapid assessment of service load effects such technique of analysis may not be available. So an analytical method of assessment of rotational end restraint for cross-beam of through truss bridges was worked out. Two cases - nodal cross-beam and inter-nodal cross-beam - were analyzed. Flexural and torsional stiffness of truss members, flexural stiffness of deck members and axial stiffness of wind bracing members in the vicinity of the analyzed cross-beam were taken into account. The provision for reduced stiffness of the X-type wind bracing was made. Finally, general formula for assessment of rotational end restraint was given. Rotational end restraints for cross-beams of three railway through truss bridges were assessed basing on the analytical method and the finite element method (three-dimensional beam-element modelling). Results of both methods show good agreement. The analytical method is able to reflect effects of some structural irregularities. On the basis of the obtained results the general values of rotational end restraint for nodal and inter-nodal cross-beams of railway through truss bridges were suggested.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.654-665
• /
• 2016

The pumping of electric power from photovoltaic (PV) farms is normally carried out using transformers, which require heavy mounting structures and are thus costly, less efficient, and bulky. Therefore, transformerless schemes are developed for the injection of power into the grid. Compared with the H4 inverter topology, the H6 topology is a better choice for pumping PV power into the grid because of the reduced common mode current. This paper presents how the perturb and observe (P&O) algorithm for maximum power point tracking (MPPT) can be implemented in the H6 inverter topology along with the improved sinusoidal current injected to the grid at unity power factor with the average current mode control technique. On the basis of the P&O MPPT algorithm, a power reference for the present insolation level is first calculated. Maintaining this power reference and referring to the AC sine wave of bus bars, a sinusoidal current at unity power factor is injected to the grid. The proportional integral (PI) controller and fuzzy logic controller (FLC) are designed and implemented. The FLC outperforms the PI controller in terms of conversion efficiency and injected power quality. A simulation in the MATLAB/SIMULINK environment is carried out. An experimental prototype is built to validate the proposed idea. The dynamic and steady-state performances of the FLC controller are found to be better than those of the PI controller. The results are presented in this paper.

• KIEAE Journal
• /
• v.17 no.3
• /
• pp.113-118
• /
• 2017

Purpose: This study amis at proposing strategies on the basis of BIM techniques to promote the spread of industrialized wooden buildings for implementation of sustainable architecture. Method: We employed social network analysis (SNA) technique to identify the mutual influences among factors that hinder popularization of new Hanok as the industrialized wooden building. Four strategies were established to reduce the factors with serious influences on each category and stakeholder using BIM techniques. Result: it was demonstrated that the problems occurred in spreading new Hanoks can be reduced by changing the influence structure of social network according to the proposed strategies.