• Journal of the Optical Society of Korea
• /
• v.11 no.2
• /
• pp.67-70
• /
• 2007

A Wide Color Gamut Backlight system was studied using a three-band white Light-Emitting Diode. A three-band white light-emitting diode (LED) was fabricated using an InGaN-based blue LED chip that emits 445-nm blue peak, and a green phosphor and red phosphor that emit 535-nm green and 621-nm red peak emissions, respectively, when excited by 450-nm blue light. Using for this three-band white LED, wide color gamut backlight unit (BLU) was attained. The luminance of BLU and CIE 1931 chromaticity coordinates was $1,700Cd/m^2$ and (0.337, 0.346). Color filter matching simulations for this configuration show that the three-band white LED backlight can be enhanced by up to 16% over conventional white LED backlight color gamut.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.486-489
• /
• 2003

Red organic electroluminescent(EL) devices based on poly(N-vinylcarbazole)(PVK) and tris(8-hydroxyquinorine aluminum)($Alq_3$) doped with red emissive material, 4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)4H-pyran(DCJTB), poly(3-hexylthiophene)(P3HT), Rubrene and 4-dicyanomethylene-2-methyl-6[2-(2,3,6,7-tetrahydro-1H,5H-benzo-[i.j])quinolizin-8yl)vinyl-4H-pyran(DCM2) were fabricated. We examine the energy transfer from $Alq_3$ to DCJTB, P3HT, Rubrene and DCM2 by comparing between the PL and EL spectrum. The maximum peak PL intensities were achieved when the doping concentration of DCJTB, DCM2, P3HT and Rubrene has 5, 1, 0.5, 2wt%, respectively. The maximum luminance of device using DCJTB showed $594\;cd/m^2$ at 15V.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.5
• /
• pp.399-405
• /
• 2013

This study demonstrates the utilization of light microscopy and Fast Fourier Transform-Peak Finding (FPF) method for microfibril angle (MFA) measurement from unstained sections of red pine (Pinus densiflora). To obtain an image with optimal contrast and resolution for MFA measurement, effects of numerical aperture (NA) of condenser lens and color filters were investigated. About 60% of NA of the maximum condenser NA produced an image with optimal contrast, but a color filter with short wavelength range (DAPI) created images with improved resolution. Manual angle measurement and the FPF method were applied to the image with optimal contrast for MFA measurement. The experimental results from the FPF method were considered to be more repeatable and less subjective than those from the manual angle measurement.

• Current Optics and Photonics
• /
• v.3 no.1
• /
• pp.40-45
• /
• 2019

Adding tunability to biological light emitters offers an unprecedented technique in biological sensing and imaging. Here, we report a tunable, lithographic-free, planar, and ultrathin metal-insulator-metal (MIM) resonator capable of tuning the optical properties solely by a silk/sodium fluorescein hydrogel layer, a biocompatible light emitter. In water, the volume of the resonator was expanded by swelling, and then the resonant mode could be shifted. Simulations predicted the red-shifted resonance peak in transmission when the MIM was swollen in water. The red-shift could be attributed to the increase in the thickness of the silk hydrogel layer due to the absorbed water. The shift of the resonance could affect the fluorescence of the dye in the silk hydrogel layer.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.3
• /
• pp.43-52
• /
• 2023

When a children's school bus stops on the road, the operator enables an amber flashing light (indicating stopping or slowing) or a red flashing light (indicating that children are getting on and off). Drivers of vehicles passing by the stopped school bus, as well as vehicles in adjacent lanes to the school bus must stop temporarily. However, many drivers are not aware of the laws and do not comply with them, so children are exposed to an increased risk of being hit, especially at night as the color recognition of the vehicle is significantly lower than during the day. In our experiments, messages and shapes using light were projected to the front and rear of a parked school bus, in addition to its red lights flashing.

• Journal of Life Science
• /
• v.13 no.1
• /
• pp.9-14
• /
• 2003

Seed germinability might be highly related to seedling establishment. The experiments were carried out to evaluate the effect of presowing treatments of aging, priming, $GA_3$ , prechilling and water imbibition, different temperatures and light quality during germination on germination of gourd (Lagenaria siceraria Standl.) seeds. Aging treatment with different temperatures and periods was done by the accelerated aging method. Priming using KNO$_3$ and $GA_3$ treatment for 24 hours were done at 100 mM and at 0.01 mM before a week prechilling. The germination tests using a week prechilled seeds were done at 10, 20 and $30^{\circ}C$ on the condition of darkness, and also with blue, red, far-red light and darkness as light quality treatments. FR-yongjadaemok and FR-kunghap were used as test cultivars and their daily germination rates were measured at treatment levels. Germination rates were reduced in the seeds aged at $45^{\circ}C$ for 6 days. Prechilling showed the highest and fastest rate among the four presowing treatments but the two other presowing treatments had similar or less rates than water imbibition. Prechilling done before sowing enhanced the low vigor seeds, and accelerated the germination of cv. FR-kunghap at 20 to $30^{\circ}C$ and with blue, red light or darkness during germination although far-red light inhibited their germination.

• Korean Journal of Plant Resources
• /
• v.13 no.1
• /
• pp.18-24
• /
• 2000

Pepper (Capsicum annum L.) used as a spice or fruit vegetable has been transplanted for cultivation to accompany the production of its seedlings in general. The experiment was done to measure the effect of its cultivars (Daemyng; Wanggochu), priming (chemicals; concentration; period), light quality (red; far-red; blue; dark) during priming, and germination temperature (25 or 15$^{\circ}C$ constant; 25/15$^{\circ}C$ alternating) on the rate of germination done under incandescent lamps until 9 days after sowing. Seed germination was better when primed with Ca(NO$_3$)$_2$ than with KNO$_3$. Priming for 6 to 12 days using the former chemical enhanced the final germination rate and shortened the elapsed days to 50% germination, $T_{50}$, compared to no-priming. Under $25^{\circ}C$ constant germination temperature, primed seeds at darkness or far-red light showed the highest rate until 5 days after sowing or the lowest one since 7 days after sowing, respectively. The germination response at 25/15$^{\circ}C$ alternating temperature did not followed the lowest rate of 15$^{\circ}C$ constant germination temperature but inclined to that of $25^{\circ}C$ constant recorded the greatest one. Under 3 germination temperature red light treated during priming elevated the rate since 7 days after sowing compared to the other light treatments, and the germination rate of each cultivar was affected by no-priming or priming, light quality during priming. which imply their interaction to the seed germination.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.84-92
• /
• 2020

To supply a stable amount of standard material to detect paralytic shellfish toxin (PST), we examined possible increases in toxic content in Alexandrium catenella and A. pacificum using a light emitting diode (LED), which is one of the most eco-friendly and economical lighting method. When comparing the growth rates of organisms and wavelengths of light used, the half saturation constants (Ks) of red wavelength were higher than those of other wavelengths. In contrast, the Ks of blue wavelength were lower than those of other wavelengths. Moreover, when comparing the toxic contents and wavelengths of light used, red wavelength produced approximately 8 times more toxic content in A. catenella and approximately 3.2 times more toxic content in A. pacificum than other wavelengths. Thus, the toxic content present in the organism might be closely related to the Ks of light. The optimum light source to be used to ensure economically ef ective and productive growth in an Alexandrium culture system (photo-bioreactor) would likely consist of a two-phase culture, wherein a blue LED is used during the lag and exponential phases to increase growth rates, followed by the use of a red LED during late exponential and stationary phases to achieve increased PST yields.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.49-58
• /
• 2010

The traffic signal controllers being used in the domestic currently are being manufactured based on the korean national police standard which was developed for controlling the quad-light traffic signal having the red, yellow, left-turn arrow, and green lights. But according to the national policy for the traffic operation, they have to be changed to be able to switch the tri-light signal having red, yellow and green lights. In this study, a new tri-light traffic signal controller was designed and developed by the way improving the Signal Control Unit of the existing quad-light standard traffic controller. The Load Signal Unit(LSU) was improved to output 6 signals which are the two assemblies of three signal indications having the red, yellow, and green lights. To enough traffic signals output to control each directional movements and the various transport modes which are car, bus, bike, and pedestrian etc., the connector bus system was designed to be able to accommodate maximum 96 signals outputs being constructed by 16 LSUs. Flasher device was developed to be able to support maximum 32 red signals. In the software, the communication protocol between traffic control center and the traffic signal controller was improved and new signal map code values were defined for the developed LSU controlling the quad-light traffic signal. A model of the quad-light traffic signal controller developed and was tested three operations, protocol-operation, remote-command and control-mode. The test result operated all of them successfully.

• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.139-145
• /
• 2016

The objective of this study was to compare the growth and light use efficiency of red leaf lettuce grown under three types of combined light-emitting diodes (LEDs) and fluorescent lamps (FL) in a closed-type plant production system. The eighteen days-old lettuce seedlings of red leaf lettuce (Lactuca sativa L., 'Jeokchima') were transplanted to the close-type plant production system equipped with three types of combined LEDs with red (R, 655 nm), blue (B, 456 nm), green (G, 515 nm), and white (W, 456 nm + 558 nm) (R:B=8:2, R:W:B=8:1:1, R:G:B=8:1:1) and FL. The seedlings were grown under normal growth conditions ($20^{\circ}C$, $181{\pm}4{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, 12 h photoperiod) for four weeks. Lettuce plants grown under FL had significantly higher leaf shape index than those under all LED treatments. Although growth of shoots and roots was not show any significant difference among LED treatments, all of the LED treatments induced about 34% higher shoot fresh weight than that of the FL. On the other hands, the total power consumption of FL was 145 kW for 4 weeks, while the mean value of LED treatments was 54 kW, which was about 3 times lower value than that of the FL. The light use efficiency based on dry matter in LED treatments was about 34 mg/W and this was about 3.5 times higher energy saving value than the FL. In conclusion, this study showed that irradiation of optimal combined LEDs in closed-type plant production systems can improve the lettuce growth as well as maximize in light use efficiency through energy saving than the FL.