• Journal of Astronomy and Space Sciences
• /
• 제18권1호
• /
• pp.27-32
• /
• 2001

A statistical study has been performed of the magnetic storm recovery phase using the Dst index for 102 storm events in the interval January 1996 to December 1998. In 43 cases (or 42%) out of our 102 events, the recovery phase exhibits fast recovery (kaking about 8 hours or less) at its initial stage or for the entire recovery period. Since this fast recovery can be explained by the fast charge exchange less of $O^{+}$ ions which mostly com from the ionosphere, and since a fraction of $H^{+}$ ions is of ionospheric origin as well, our statistical result supports the view that the source of ring current ions in many magnetic storms can be terrestrial.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.114-120
• /
• 2008

In the vision-based recovery phase, a terminal guidance for the blended-wing UAV requires visual information of high accuracy. This paper presents the light source target design and detection algorithm for vision-based UAV recovery. We propose a recovery target design with red and green LEDs. This frame provides the relative position between the target and the UAV. The target detection algorithm includes HSV-based segmentation, morphology, and blob processing. These techniques are employed to give efficient detection results in day and night net recovery operations. The performance of the proposed target design and detection algorithm are evaluated through ground-based experiments.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2357-2363
• /
• 2021

Silicon carbide is widely used in radiation environments due to its excellent properties. However, when exposed to the strong radiation environment constantly, plenty of defects are generated, thus causing the material performance downgrades or failures. In this paper, the two-temperature model (2T-MD) is used to explore the defect recovery process by applying the electronic energy loss (Se) on the pre-damaged system. The effects of defect concentration and the applied electronic energy loss on the defect recovery process are investigated, respectively. The results demonstrate that almost no defect recovery takes place until the defect density in the damage region or the local defect density is large enough, and the probability of defect recovery increases with the defect concentration. Additionally, the results indicate that the defect recovery induced by swift heavy ions is mainly connected with the homogeneous recombination of the carbon defects, while the probability of heterogeneous recombination is mainly dependent on the silicon defects.

• 한국응용과학기술학회지
• /
• 제27권2호
• /
• pp.208-215
• /
• 2010

EAF dust which is contained around 30% of zinc, 15% of iron and 3% of lead individually, is chemically treated by ammonium chloride, ammonia water, ammonia gas and carbon dioxide, and also tested and identified the ratios of the recovery of In by applied the variations of particle size, pH and heating temperature as well, in order to getting optimized recovery of the In metal after performing all of those processes. Experimental results showed that the rate of Zn recovery is 97% when the mixture of 1.3 of $NH_4Cl$/EAF is heated to the temperature of $400^{\circ}C$ and leached by water, and 95% recovery of In when ammonia gas and carbon dioxide is added simultaneously and adjust the 9.5 of pH to the same mixture above. For the purpose of remove the impurities in the mixed sample, which is prepared by the two samples, indicated above showing as the ratio of 95% and 97% recovery, in case of applied the cementation process to it, and also by electrolytic process, produced the In plate of 95~97%, and acquired 99-99.5% of In metal ingot finally by applied the heating process at $470{\sim}500^{\circ}C$.

• 한국전자거래학회지
• /
• 제4권3호
• /
• pp.159-178
• /
• 1999

As Electronic Commerce is getting larger, the volume of Internet-based commerce by enterprise is also getting larger. This phenomenon applies to Internet EDI, Global Internet Business, and CALS information services. In this paper, a new type of cryptographic key recovery mechanism satisfying requirements of business environment is proposed. It is also applied to enterprise information infrastructure for managing employees' task related to handling official properties of electronic enterprise documents exchange. This technology needs to be complied to information management policy of a certain enterprise environment because behavior of cryptographic key recovery can cause interruption of the employees' privacy. However, the cryptographic key recovery mechanism is able to applied to any kind of information service, the application areas of key recovery technology must be seriously considered as not disturbing user's privacy It will depend on the policy of enterprise information management of a specific company.

• Advanced Composite Materials
• /
• 제18권4호
• /
• pp.315-326
• /
• 2009

PCC (precipitated calcium carbonate) and ground calcium carbonate have been widely used in alkaline papermaking. Unfortunately, although increasing filler level in papers can improve the paper properties such as brightness, opacity, stiffness gloss, smoothness, porosity, and printability, as well as decrease cost, some strength of the paper is negatively affected. In this research, needle-like aragonite was synthesized using $Ca(OH)_2$ and $CO_2$ as reactants in the presence of $MgCl_2$ and characterized with scanning electronic microscopy (SEM) and X-ray diffraction (XRD). The physical and optical properties of the paper handsheets containing these needle-like aragonite fillers were evaluated. Results indicated that tensile strength, Z-direction tensile strength and folding endurance of the paper were improved by the needle-like aragonite crystals compared to the paper using commercial PCC (precipitated calcium carbonate) as filler. The stiffness of the paper handsheet on the machine direction was increased, but no evident difference in the cross direction was found. The improvement of paper strength mainly resulted from the twining effect between the aragonite whiskers and paper fibers. The optical properties of the paper were slightly decreased with the use of the needle-like aragonites compared to commercial PCC. These results suggest that paper cost can be decreased by increasing the content of needle-like aragonite filler while paper strength will not be decreased compared to PCC filler.

• 산업기술연구
• /
• 제15권
• /
• pp.51-62
• /
• 1995

Databases can crash due to various failures in computer systems. Recovery is a mechanism for restoring consistent data from damages caused by the by the failures and is an essential feature in database systems. This paper surveys recovery techniques for memory resident database systems. We first describe the basic architecture for memory resident database systems, and point out the main factors affecting their performance enhancement. Next, we explain the write-ahead logging(WAL), a recovery technique widely-used in most disk resident database systems, for easy understanding of basic recovery mechanisms. And then, we discuss some new concepts employed in memory resident database systems recovery. Finally, we present a representative memory resident database recovery technique, which is based on a special purpose hardware called HALO, as a case study.

• Journal of Information Processing Systems
• /
• 제15권1호
• /
• pp.55-66
• /
• 2019

Storage system often applies erasure codes to protect against disk failure and ensure system reliability and availability. Liberation code that is a type of coding scheme has been widely used in many storage systems because its encoding and modifying operations are efficient. However, it cannot effectively achieve fast recovery from single disk failure in storage systems, and has great influence on recovery performance as well as response time of client requests. To solve this problem, in this paper, we present HRSF, a Hybrid Recovery method for solving Single disk Failure. We present the optimal algorithm to accelerate failure recovery process. Theoretical analysis proves that our scheme consumes approximately 25% less amount of data read than the conventional method. In the evaluation, we perform extensive experiments by setting different number of disks and chunk sizes. The results show that HRSF outperforms conventional method in terms of the amount of data read and failure recovery time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.509-514
• /
• 2004

This paper introduces the modified slip energy recovery system in order to improve its power factor and to reduce harmonics of line current waveforms. Twelve pulse line commutated converter with the chopper type IGBT is applied where the chopper is applied across the DC terminal and the chopped DC is fed to the converter operating as an inverter and then passed through the wye-wye and delta-wye transformer circuit. This scheme leads to be able to adjust the speed of the motor by the duty cycle of the chopper operating in PWM mode. The fuzzy logic controller is also introduced to the modified slip energy recovery system for keeping the motor speed to be constant when the load varies. The experimental results in testing the 0.22 kW wound rotor induction motor from no-load condition to rated condition show the effectiveness of the proposed control scheme.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권4호
• /
• pp.275-279
• /
• 2004

A new burst mode clock and data recovery circuit is realized that improves the previousldy-known gated-oscilletor technique with half rate clock recovery, The circuit was fabricated with 0.25um CMOS technology, and its functions were confirmed up to 1 Gbps.