Journal of the Korean Applied Science and Technology (한국응용과학기술학회지)

The Korean Society of Applied Science and Technology (한국응용과학기술학회)
권호 표지
DOI QR코드

DOI QR Code

The Study on the Recovery Process of Zinc Metal from EAF Dust by Chemical Treatment

EAF 분전의 화학적처리에 와한 금속아연의 제조에 관한 연구

  • Jeong, Rae-Youn (Department of Chemical Engineering, Seoul National University of Technology) ;
  • Lee, Jin-Hui (Department of Chemical Engineering, Seoul National University of Technology)
  • 정래윤 (서울산업대학교 화학공학과) ;
  • 이진휘 (서울산업대학교 화학공학과)
  • Received : 2010.05.03
  • Accepted : 2010.06.22
  • Published : 2010.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

EAF dust which is contained around 30% of zinc, 15% of iron and 3% of lead individually, is chemically treated by ammonium chloride, ammonia water, ammonia gas and carbon dioxide, and also tested and identified the ratios of the recovery of In by applied the variations of particle size, pH and heating temperature as well, in order to getting optimized recovery of the In metal after performing all of those processes. Experimental results showed that the rate of Zn recovery is 97% when the mixture of 1.3 of $NH_4Cl$/EAF is heated to the temperature of $400^{\circ}C$ and leached by water, and 95% recovery of In when ammonia gas and carbon dioxide is added simultaneously and adjust the 9.5 of pH to the same mixture above. For the purpose of remove the impurities in the mixed sample, which is prepared by the two samples, indicated above showing as the ratio of 95% and 97% recovery, in case of applied the cementation process to it, and also by electrolytic process, produced the In plate of 95~97%, and acquired 99-99.5% of In metal ingot finally by applied the heating process at $470{\sim}500^{\circ}C$.

Keywords

References

  1. Helmut Maczek and Rolf Kola, Recovering of Zinc and Lead from Electric Furnace Steelmaking Dust at Berzelius, Journal of Metals, 53-58 (1980).
  2. Herlitz, H.G, The Plasma Dust Process for Recovery of Metals from Waste Oxides, Resources and Conservation, 9, 191-198 (1982). https://doi.org/10.1016/0166-3097(82)90074-8
  3. Korea Zinc Company, The Recovery of Valuable Materials and Making Clean Slag from EAF Dust, 21C Frontler R＆D Program, 17-19 (2006).
  4. J. Frenay, S. Ferlay and J. Hissel, Iron Steel Soc, 171-175 (1986).
  5. Olper, M. and Maccagni, M, Electrolytic Zinc Production from Crude Zinc Oxide with the EZINEX Process, Proc. of 4th Inter. Sym. on Recycling of Metals and Engineered Materials, 379-396 (2000).
  6. D.B. Dreisinger, E. Peters and G. Morgan, Hydromet, 28 137-152 (1990).
  7. J. Antrekowitsch and H.Antrdkowitsch, Hydrometallurgically recovering zinc from EAF dust" JOM. 26-28 (2001).
  8. Zhao Youcai, Integrated Hydrometallurgical process for production of zinc from EAF in alkaline medium, Journal of Hazardous Materials B80, 223-240 (2002).
  9. A. J. B.Dutra, P.R.P. Paiva, L.M. Tavares, Alkaline leaching of from electric arc furnace steel dust, Minerals Engineering 19, 478-485 (2006). https://doi.org/10.1016/j.mineng.2005.08.013
  10. W. J. Choi, J. G. Ahn and E. C. Lee, A Study on the Leaching of Zinc from Steelmaking Electric Furnace Dusts with Sulfuric and Sulfurous Acids, The Korean society for geosystem engineering, 35, 193-200 (1998).
  11. J. H. Hwang, C. H. Oh, C. T. Lee, Slective extraction of Zn component from leachate of waste EAF dust using liquid membrane process, J. Korean Solid Wastes Engineering Society, 17, 619-627 (2000).
  12. Korea Iron & Steel Association, R&D Program for treatment technology from electric arc furnace steel dust, Korea research association of new iron and steel making technology, 7-8 (1996).
  13. Marco Olper, Zinc Extraction from EAF Dust with EZINEX${\circledR}$, Process, Third International Symposium on Recycling of Metals and Engineering Materials, The Minerals, Metals & Materials Society, 563-578 (1995).