• 제목/요약/키워드: Recommended Items

검색결과 472건 처리시간 0.028초

기존 철도 교량의 내진성능 평가 (Seismic-Performance Evaluation for Existing Railway Bridges)

  • 임남형;강영종;양재성;엄주환
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 1999년도 춘계학술대회 논문집
    • /
    • pp.422-427
    • /
    • 1999
  • This is the basic study on the evaluation of seismic performance for existing railway bridges. This study presents all evaluation items and a progressive method of seismic performance for existing railway bridges. In the evaluation of seismic performance, a two-stage is used. Firstly, according to the seismic performance evaluation categories, preliminary screening of bridges is recommended. And using tile seismic rating system, seismic rank of bridges is calculated. Secondly, for the selected bridges in the first stage, detailed evaluation is recommended.

  • PDF

DIACON 정도관리물질의 평가 (Evaluation of quality control, DIACON)

  • 김병찬;정창기;김상수;박혜미;김지선
    • 핵의학기술
    • /
    • 제19권1호
    • /
    • pp.44-50
    • /
    • 2015
  • Purpose Quality control used in laboratory help to sustain precision and accuracy consistently to ensure the Diagnostic and treatment for medical employee. To perform an evaluation in statistical manner, it is recommended to use different quality control material than calibrator from manufacturer, quality control material must include analyzed concentration perimeter, must use more than two different concentration materials and recommended to use materials to indicate the concentration in clinical use. However, currently used quality control material has limit of evaluation due to unconsidered concentration or improperly used to get clinical importance data. Therefore, we compared the value of quality control, DIACON Hormone Level 1, 2, 3 (Scantibodies, USA) and DIACON Tumor Level 1, 2, 3 which applied to clinical concentration range. Materials and Methods DIACON Hormone Level 1, 2, 3 (Scantibodies, USA) and DIACON Tumor Level 1, 2, 3 (Scantibodies, USA) that used materials and methods test to compare the result from five RIA testing institution and one institution that used Elecsys (ROCHE) and Architect (ABOTT) for each level. The reagent RIA kit that used in this experiment is followed by Table 2 and 3. Test has performed by instruction itself and follow by instruction. Results Among DIACON hormone result of twenty four items, level 1 have three items, level 2 have four items and level 3 have five items were out of manufacturer set up range based on the average value. Among DIACON tumor result of thirteen items, level 1 have three items, level 2 have four items and level 3 have five items were out of manufacturer set up range. Other result were inside of manufacturer range. Conclusion For quality control material, it is widely available in market, but it is limited for normal range which is only concerned in improper clinical value and difficult to evaluate important concentration area in terms of clinical analyze. In this experiment, we evaluate Hormone twenty three items and Tumor thirteen items with DIACON Hormone and Tumor (Scantibodies, USA) to resolve this limit and we could observe that it ca be substituted and used.

  • PDF

초등학생용 수학에 대한 태도척도의 개발과 타당화 (Validation of a Scale for Elementary School Students' Attitudes toward Mathematics)

  • 정혜영;이경화
    • 아동학회지
    • /
    • 제27권5호
    • /
    • pp.49-65
    • /
    • 2006
  • This attitudes scale for prediction of mathematics achievement by elementary school students was developed from 50 initial items from the literature rated for content validity by 30 experts. The ratings rendered 31 revised items used for exploratory factor analysis and reliability tests. The 31 items were administered to 183 elementary students in 4th, 5th, and 6th grades, yielding 4 factors : enjoyment, confidence, value, and motivation with high inter-items consistency. To confirm appropriateness of the constructed model and to test its predictability in mathematics achievements, confirmative factor analysis and discriminant analysis were performed on 693 cases. Results showed that the attitude scale model of 4 factors can be recommended for use in the measurement of elementary school students' attitudes toward mathematics.

  • PDF

한국, 미국, 일본의 식품성분표 비교 (International Comparison of Food Composition Table)

  • 최정숙;전혜경;박홍주
    • 한국지역사회생활과학회지
    • /
    • 제12권2호
    • /
    • pp.119-135
    • /
    • 2001
  • This study was conducted to compare the composition table of Korean food with that of foreign food. Analysis was made for Korean food composition table($5^{th}$ revision), Korean food composition table in Appendix of Recommended Dietary Allowances for Korean(6$^{th}$ th/ edition), Standard tables of food composition in Japan($5^{th}$ revised edition) and USDA Composition of Foods - Raw, Processed, Prepared. The method of content analysis was applied for this study and such differences were pointed out as the classification of food items, food items enlisted, the content unit of food and food components presented etc. To improve Korean food composition table, new food items and components should be added and old food items be eliminated based on the change of people's food consumption pattern. Also analysis for the domestic foods consumed by local people should be accomplished rather than borrowing foreign country's data.

  • PDF

고무차륜 경량전철의 충돌안전도 연구 (A Study on Crashworthiness of Rubber Tired AGT)

  • 구정서;한형석;조현직
    • 한국철도학회논문집
    • /
    • 제5권4호
    • /
    • pp.215-221
    • /
    • 2002
  • In the standard specifications for the urban EMU (Electric Multiple Unit) train, there are several items to ensure safety against accidents. The 21st to the 23rd items have much to do with the crashworthiness of the urban EMU train. In this study, a rubber-tired Automated Guide-way Transit (AGT) System under development by KRRI is numerically evaluated from the point of view of crashworthiness by applying the above crashworthiness items. The numerical results show that the design of the AGT satisfies the 22nd and 23rd items. But a design modification to adopt mechanical fuses is recommended to reduce impact accelerations with respect to the 21st item.

Guideline on Acceptance Test and Commissioning of High-Precision External Radiation Therapy Equipment

  • Kim, Juhye;Shin, Dong Oh;Choi, Sang Hyoun;Min, Soonki;Kwon, Nahye;Jung, Unjung;Kim, Dong Wook
    • 한국의학물리학회지:의학물리
    • /
    • 제29권4호
    • /
    • pp.123-136
    • /
    • 2018
  • The complex dose distribution and dose transfer characteristics of intensity-modulated radiotherapy increase the importance of precise beam data measurement and review in the acceptance inspection and preparation stages. In this study, we propose a process map for the introduction and installation of high-precision radiotherapy devices and present items and guidelines for risk management at the acceptance test procedure (ATP) and commissioning stages. Based on the ATP of the Varian and Elekta linear accelerators, the ATP items were checked step by step and compared with the quality assurance (QA) test items of the AAPM TG-142 described for the medical accelerator QA. Based on the commissioning procedure, dose quality control protocol, and mechanical quality control protocol presented at international conferences, step-by-step check items and commissioning guidelines were derived. The risk management items at each stage were (1) 21 ionization chamber performance test items and 9 electrometer, cable, and connector inspection items related to the dosimetry system; (2) 34 mechanical and dose-checking items during ATP, 22 multileaf collimator (MLC) items, and 36 imaging system items; and (3) 28 items in the measurement preparation stage and 32 items in the measurement stage after commissioning. Because the items presented in these guidelines are limited in terms of special treatment, items and practitioners can be modified to reflect the clinical needs of the institution. During the system installation, it is recommended that at least two clinically qualified medical physicists (CQMP) perform a double check in compliance with the two-person rule. We expect that this result will be useful as a radiation safety management tool that can prevent radiation accidents at each stage during the introduction of radiotherapy and the system installation process.

감마나이프 정도관리에 관한 연구 (A Study on Quality Assurance for Gamma Knife)

  • 서원섭;신동오;지영훈;임영진
    • 한국의학물리학회지:의학물리
    • /
    • 제14권3호
    • /
    • pp.184-188
    • /
    • 2003
  • 감마나이프는 일회에 대용량의 방사선량을 조사하여 뇌정위 방사선 수술을 하기 때문에, 주기적인 정도 관리가 매우 중요하다. 그러나 국내의 경우 학회 및 규제기관 차원에서 권고되고 있는 표준화된 정도관리 절차서가 없이, 각 기관별로 독자적인 정도관리 절차서를 개발하여 시행되고 있어, 기관별로 상호 비교하기가 어려운 실정이다. 따라서 본 연구에서는 국내 실정에 적합한 감마나이프 정도관리 프로그램을 개발하기 위해, 제조사, 미국 및 일본에서 권고하고 있는 정도관리 절차서를 수집하여 비교 분석하였다 또한 감마나이프에 대한 주기적인 정도관리 검사항목을 선량관련 검사항목, 기계적인 검사항목 및 안전 관리적인 측면으로 분류하였다. 미국의 경우 제조사 보다 엄격하게 권고 및 규제하고 있으며, 일본의 경우 미국의 절차서를 토대로 검사항목 및 주기를 권고하고 있다. 이를 토대로 국내 실정에 적합한 감마나이프 정도관리 절차를 제시하고자 한다.

  • PDF

B2B를 이용한 유통업체의 의류상품구매 사례연구 (A Case Study of Retail Fashion Buying through B2B)

  • 윤혜영;고은주
    • 대한가정학회지
    • /
    • 제42권2호
    • /
    • pp.117-131
    • /
    • 2004
  • The purpose of this study was to examine the current situation of B2B fashion buying behavior (i.e., buying motives, product characteristics, buying processes), and to analyze the buying performance, buying problems and buying strategies. In depth, face-to-face interviews with structured questionnaire were conducted with three buyers and three vendors related to 18 buying items of C Company. Results of this research were as following:1. Buying motives were mainly reduction of buying costs, improvement of profits, and increased efficiency in buying process for retail buyers, while the selling motive was mainly improvement of market share for suppliers. Suitable items for B2B buying were basic items or bulk items. The B2B buying process included the following steps: selecting auction items, target prices, and suppliers ; setting the product specification and bidding niles; training the suppliers for preparing the auction; proceeding the auction by internet. 2. The perceived B2B benefits for buyers were profit improvement and cost reduction while those for suppliers were time saving and market share improvement. The indicated buying problems were as poor product quality, low product image, and difficulty in partnership. For B2B buying strategies, a quality management system, various auction tactics based on items, and a supplier management system were recommended.

한국 간호대학생의 스트레스 측정도구 개발 (Development of a Stress Scale for Korean Nursing Students)

  • 유지수;장순정;최은경;박지원
    • 대한간호학회지
    • /
    • 제38권3호
    • /
    • pp.410-419
    • /
    • 2008
  • Purpose: The purpose of this study was to develop a stress measurement scale for Korean nursing students. Methods: Sixty preliminary items were selected by classifying 229 basic items extracted via literature review and Q-sorting method. In order to verify the reliability and validity of the preliminary instrument, data were collected from 617 nursing students in 2 colleges of nursing in Korea. Results: As a result of the item analysis, 58 items were selected. They consisted of 2 types of stress which were college-based stress (38 items) and clinical-based stress (20 items). Ten factors in college-based stress and four factors in clinical-based stress were extracted by factor analysis, and each had a total variance of 63.01%, and 64.93%. Cronbach's Alpha of those 58 items were .937 in college-based stress and .922 in clinical-based stress, which was high. Conclusion: This paper is meaningful in a way that it has developed a tool capable of measuring stress for nursing students, which reflects the characteristics of our country. It is recommended for further study to re-verify the relevance and stability of this measurement.

응급구조(학)과 학생들의 구급현장실습 대체 간접실습 학습 항목 제안 (Proposal of indirect experience practice learning items to alternative ambulance ride practice in paramedic students)

  • 홍성기
    • 한국응급구조학회지
    • /
    • 제25권2호
    • /
    • pp.7-18
    • /
    • 2021
  • Purpose: This study aimed to present the learning items of indirect practice as an alternative means of ambulance riding practice. Methods: Twelve on-site professionals participated in testing the effectiveness of learning items of utility value in indirect experience practice among the recommended learning objectives of ambulance ride practice using the modified Delphi technique. To validate the learning objectives, the Delphi technique was used to check content validity, and analytic hierarchy process (AHP) analysis was used to analyze the weighting value. Results: As the learning goal of indirect experience practice replaced the ambulance riding practice, four items were derived in consideration of practicality. These items were consistent with the Delphi panel's consistency index, convergence, and agreement. The first learning item to consider was 'Prevention of infection and risk of infection.' Conclusion: The results of this study are meaningful in that they propose the learning items that can achieve the minimum educational goal through indirect experience practice as an alternative means of ambulance training.