• Journal of the Korean Magnetics Society
• /
• v.6 no.1
• /
• pp.7-14
• /
• 1996

According to demands of high density and wide band magnetic recording systems, a composite MIG head was developed. This head has the sufficient performance for use of a SD VCR : its characteristics are a good recoding performance, a low rubbing noise, a good frequency dependence of efficiency, and a good compatibility with ME tape. In a SD VCR system, the C/N value of a composite MIG head at 20.92MHz was 51 dB.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.6
• /
• pp.1-8
• /
• 2003

A novel CORDIC circuit is presented based on a redundant number system eliminating global carry Propagation. The number format employs a new recoding scheme similar to the Booth receding resolving carry problems in addition. A pipelined architecture is introduced having a constant scale factor in its computation of trigonometric functions. The operational time of the circuit is constant independent of the number of operand digits.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.6
• /
• pp.32-38
• /
• 2003

An excess-3 code adde $r_tracter circuit is proposed for human friendly decimal computation. Carry lookahead (CLA) circuitry can be used to enhance decimal computation speed. The proposed excess-3 adde $r_tracter employs improved CLA and compensation circuitry recoding computation delay. The circuitry used for addition is used for subtraction without further modification. Substantial speed improvement is obtained compared to conventional designs.signs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.837-842
• /
• 2007

Information storage devices using disks have a disk vibration at the frequency which is equivalent to the disk rotational speed. They also have a track vibration due to the disk eccentricity at the same frequency. In near field recording systems, the former affects the air-gap servo and the latter affects the tracking servo. In this paper, we introduce a novel control algorithm based on the internal model principle to both servos. A controller block designed by the principle is connected to the base lead-lag type compensator in parallel in order to cancel the repeatable run-out due to the disk vibration or eccentricity. Simulation and practical application of the algorithm on a near field recording system show good servo performance.

• Journal of information and communication convergence engineering
• /
• v.9 no.2
• /
• pp.161-165
• /
• 2011

Recently, According to increasing interest to original sound Karaoke instrument, MIDI type karaoke manufacturer attempt to make more cheap method instead of original recoding method. Separating technique for singing voice from music accompaniment is very useful in such equipment. We propose a system to separate singing voice from music accompaniment for stereo recordings. Our system consists of three stages. The first stage is a spectral change detector. The second stage classifies an input into vocal and non vocal portions by using GMM classifier. The last stage is a selective frequency separation stage. The results of removed by listening test from the results for computer based extraction simulation, spectrogram results show separation task successfully. Listening test with extracted MR from proposed system show vocal separating and removal task successfully.

• Proceedings of the KOSOMBE Conference
• /
• v.1992 no.05
• /
• pp.75-78
• /
• 1992

This paper describes research about the realization of a diagnosis system for the surgical operation of the acupuncture. The system consists of the Munjin, Bokjin and Makjin software. The Munjin system diagnoses the pain spots or each Kyoungnats of the hands, root and neck. The Bokjin system diagnoses pressure-pain spots of the twelve Kyoungnak at chest and abdomen by following the displayed positions on the monitor in sequentially. The Maekjin system diagnoses radial pulse or inyoung and chongu according to the Inyoung-Chongu comparison in ethod. Compound diagnosis verifies the results which obtained from each diagnosis routine by the interface rule. This developed system contains the database which for the paitents diagnosis and treatment process recoding.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1179-1182
• /
• 2005

To facilitate the cell based robot research, we presented a micro-mechanical force measurement system for the biological muscle actuators, which utilize glucose as a power source for potential application in a human body or blood vessels. The system is composed of a micro-manipulator, a force transducer with a glass probe, a signal processor, an inverted microscope and video recoding system. Using this measurement system, the contractile force and frequency of the cardiac myocytes were measured in real time and the magnitude of the contractile force of each cardiac myocyte on a different condition was compared. From the quantitative experimental results, we estimated that the force of cardiac myocytes is about $20{\sim}40\;{\mu}$N, and showed that there is difference between the control cells and the micro-patterned cells.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.3
• /
• pp.165-170
• /
• 2015

SNOMED CT browser is a browsing tool for searching clinical terms in SNOMED CT which is a standard terminology set used worldwide. The search result view of previous browsers merely list up candidate terminologies. The problem is that most of users become confused about how to select an appropriate term from the list. This leads serious waste of medical recoding cost. This paper discusses characteristics of SNOMED CT dataset and proposes a novel design of enhanced result view by restructuring the results using relationships of SNOMED CT concepts. Using the proposed scheme, medical doctors or officers can select appropriate terms more efficiently and can reduce overall recording time.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1159-1160
• /
• 2008

For safety railway vehicle movement, analysis and recoding of railway vehicle speed and driving information has written by law. nowadays, base in europe, these system is spread of various advanced country. In this paper, We implement an event recorder which record the driving and breaking information of running railway vehicle. For the event recorder, We designed the data structures with data analysis tools and a protocol between Event recorder and data analysis tool. The verification of Analysis tool was tested by to made data by Event Recorder's emulator and information of real railway driving recording.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.10
• /
• pp.67-72
• /
• 1994

In this paper we suggest a 32 bit high speed parallel multiplier which plays an important role in digital signal processing. We employ a bit-pair recoding Booth algoritham that gurantees n/2 partial product terms, which uniformly handles the signed-operand case. While partial product terms are generated, a special method is suggested to reduce time delay by employing 1's complement instead of 2's complement. Later when partial products are added, the additional 1 bit's are packed in a single partial product term and added to in the parallel counter. Then 16 partial product terms are reduced to two summands by using successive parallel counters. Final multiplication value is obtained by a BLC adder. When this multiplier is simulated under 0.8$\mu$CMOS standard cell we obtain 30ns multiplier speed.