• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.138-147
• /
• 2020

The construction field is one of the most representative job creation businesses, but it has been pointed out that the overall quality of the jobs is low because of the nature of the order-made production industry, such as unstable employment structure, aging workforce, etc.. Accordingly, the government plans to implement the "prevailing wage system" that guarantees a minimum wage for construction site workers. In reality, however, only a market wage could be used for a construction cost estimation because there was no standard for the prevailing wage. A comparative analysis of the prevailing wage and market wage was performed. This paper proposes a framework for estimating the reasonable prevailing wage in the construction industry. The results showed that the prevailing wage was estimated to be 4.7% lower than the market wage when the proposed framework is applied to the carpenters' case. This suggests that the proposed model could be used as an alternative for market wage considering the original purpose of the prevailing wage. This study will construct the basic data for scientific analysis on the wage, and finally, help estimate the reliable prevailing wage in the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.260-260
• /
• 2011

SWAT is semi-distributed and continuous-time distributed simulation watershed model, which can simulate point and nonpoint source pollutants as well as hydrology and water quality. It was developed to predict the effects of alternative management decisions on water, sediment, and chemical yields with reasonable accuracy. It is able to predict and manage hydrology, sediments, nutrients, and pesticides with Best Management Practices (BMPs) in a watershed. SWAT model also has potential for use in ungauged basins to predict streamflow and baseflow from saturated source area in watersheds. According to various cultivation practices and climate change, SWAT model is available to analyze relative change in hydrology and water quality. In order to establish optimum management of water quality, both monitering and modeling have been conducted actively using SWAT model. As SWAT model is computer program to simulate a lot of natural phenomena, it has limitation to predict and reflect them with on hundred percent accuracy. Thus, it is possible to analyze the effect of BMPs in the watershed where users want to simulate hydrology and water quality only if model accuracy and applicability are assessed first of all and the result of it is well for the study watershed. For assessment of SWAT applicability, most researchers have used $R^2$ and Nash and Sutcliffe Efficiency (NSE). $R^2$ and NSE are likely to show different results according to a warm up period and sometimes its results are very different. There have been hardly any studies of whether warm up period can affect simulation results in SWAT model. In this study, how warm up period has a effect on SWAT results was analyzed and a appropriate warm up period was suggested. Lots of SWAT results were compared after using measured data of Soyanggang-dam watershed and applying various warm up period (0 ~ 10 year(s)). As a result of this study, when there was no warm up period, $R^2$ and NSE were 0.645, 0.602 respectively, when warm up period was 2 years, $R^2$ and NSE were 0.648, 0.632, and when warm up period was 4 years, $R^2$ and NSE were 0.663, 0.652 separately. Through this study, sensitive analysis of warm up period in SWAT model was conducted, and this study could give a guideline able to simulate hydrology and water quality for more accuracy than before as users change a lot of warm up periods as well as any simulation parameters.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.1
• /
• pp.15-26
• /
• 2003

Ultrasonic inspection methods are widely used for detecting flaws in materials. The signal analysis step plays a crucial part in the data interpretation process. A number of signal processing methods have been proposed to classify ultrasonic flaw signals. One of the more popular methods involves the extraction of an appropriate set of features followed by the use of a neural network for the classification of the signals in the feature space. This paper describes an alternative approach which uses the least mean square (LMS) method and expectation maximization (EM) algorithm with the model based deconvolution which is employed for classifying nondestructive evaluation (NDE) signals from steam generator tubes in a nuclear power plant. The signals due to cracks and deposits are not significantly different. These signals must be discriminated to prevent from happening a huge disaster such as contamination of water or explosion. A model based deconvolution has been described to facilitate comparison of classification results. The method uses the space alternating generalized expectation maximization (SAGE) algorithm In conjunction with the Newton-Raphson method which uses the Hessian parameter resulting in fast convergence to estimate the time of flight and the distance between the tube wall and the ultrasonic sensor Results using these schemes for the classification of ultrasonic signals from cracks and deposits within steam generator tubes are presented and showed a reasonable performances.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.1
• /
• pp.27-35
• /
• 2005

Ultrasonic inspection methods are widely used for detecting flaws in materials. The signal analysis step plays a crucial part in the data interpretation process. A number of signal processing methods have been proposed to classify ultrasonic flaw signals. One of the more popular methods involves the extraction of an appropriate set of features followed by the use of a neural network for the classification of the signals in the feature spare. This paper describes an alternative approach which uses the least mean square (LMS) method and exportation maximization (EM) algorithm with the model based deconvolution which is employed for classifying nondestructive evaluation (NDE) signals from steam generator tubes in a nuclear power plant. The signals due to cracks and deposits are not significantly different. These signals must be discriminated to prevent from happening a huge disaster such as contamination of water or explosion. A model based deconvolution has been described to facilitate comparison of classification results. The method uses the space alternating generalized expectation maximiBation (SAGE) algorithm ill conjunction with the Newton-Raphson method which uses the Hessian parameter resulting in fast convergence to estimate the time of flight and the distance between the tube wall and the ultrasonic sensor. Results using these schemes for the classification of ultrasonic signals from cracks and deposits within steam generator tubes are presented and showed a reasonable performances.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.1
• /
• pp.1-6
• /
• 2017

BACKGROUND: Bone meal is commonly used as a phosphorus (P) fertilizer in organic farming. Effectiveness of bone meal was compared with mineral P fertilizer to elucidate the optimum application rates of bone meal in crop production. METHODS AND RESULTS: The effects of bone meal and fused phosphate on plant growth and P uptake were determined in a pot experiment with maize (Zea mays L.) in a clay loam soil. Bone meal and fused phosphate were applied at 150 and 300 mg $P_2O_5/kg$ soil, and maize was grown for 3 consecutive growth periods of 4 to 5 weeks each. As compared with fused phosphate, total shoot growth of maize per pot was 3-6% lower in bone meal fertilization, and the difference was not significant in the application of 300 mg $P_2O_5/kg$. At the same P application rate, uptake of P by maize plants was 7-9% lower in bone meal treatment. The P use efficiency in bone meal treatments ranged from 11.9-13.6%, equivalent to 73-84% of the efficiency for fused phosphate treatments. CONCLUSION: The equivalence of immediate effectiveness of bone meal as a P fertilizer was at least 90% compared with fused phosphate in the pot experiment with maize. The results indicate that bone meal could be a reasonable alternative to chemical P fertilizers.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.6
• /
• pp.597-608
• /
• 2011

It has been often noted as a problem that as there are no objective and clear criteria for the repair cost estimate of persistent defects, when a claim arises in relation to an apartment construction, significantly different amounts of compensation may be given for similar defects based on the experience and tendencies of the construction experts asked to make a judgment. For this reason, this research aims to present defect managers with a more reasonable and objective estimation criteria and a system to determine the repair cost of defects based on an analysis of relevant factors. The research findings show that the historical cost system is applied first, and then a standard of estimation is used to estimate the cost for the items that are not included in the historical cost system. The criteria for the repair cost for each defect is as follows: the repair cost for defects arising from a regulation violation is determined by calculating the reconstruction cost of the parts in question after demolishing them; the repair cost for progressive defects is determined based on a contribution ratio proportional to the age of the building; the repair cost for repetitive defects is calculated by considering an alternative to maximize the intended function of the defective parts; and the repair cost for value depreciation defects is determined based on the ratio of the warranty period to the lapsed years. However, repair cost estimation for dual value depreciation defects should be studied in future research.

• Hwankyungkyoyuk
• /
• v.12 no.1
• /
• pp.205-224
• /
• 1999

This is a study of strengthening the practice of environmental education in the primary and secondary school music program. Since the world war II, the environmental situation has been getting worse and worse. So it is now a global issue to conserve energy and solving the ecological problems we are confronting. Solving the environmental problem is not just a scientist's task nor a specific school education subject's either, but a responsibility of all human beings. In this sense, it is necessary for every school subject, including music, should include elements of environmental education in its education contents. in this paper the researcher has tried to point out some reasonable aspects of environmental education guidelines which would be pursued through school music programs. In the music subject the following eight environmental education strategies could be suggested: 1. An affective aspect of music should be used in educating students to aware of the importance of environmental problems. 2. The effectiveness of employing music for various educational purposes should be implemented to make students environmentally enlightened individual. 3. The main issue of environmental problem must be used in various musical activities such as singing, implementing, composing and appreciating music. 4. By employing an alternative materials for making musical instruments, students and musicians can participate in environmental education program actively. 5. Music is analogues to life and nature. Thus it is highly suggested for teachers to teach students music more sincerely In a way of studying music more seriously, students could achieve environmental education goals by discovering the similarities of the nature of the environment and music as a human environment. 6. By appreciating many musical works of dealing with environmental problems and ecological problems, one could achieve the necessary goals of environmental education. 7. By enlarging the boundary of music including the sounds of nature such as birds' singing, sounds of winds and various streams and tree's trembling, music could achieve the major goals of environmental education. 8. By recognizing sounds as an important human environment, school music program could attain the goals of environmental education. The researcher also has mentioned about the characteristics of music as a schooling subject. and has provided with some detailed curriculum guidelines for strengthening environmental education programs in music classes. Some model lesson plans implementing the environmental education for elementary, junior high school and 10th grade music classes are also suggested followed by six specific teaching ＆ learning methods for environmental education.

• Smart Media Journal
• /
• v.3 no.1
• /
• pp.52-62
• /
• 2014

Prevalence of common three-dimensional display progresses, increasing the demand for three-dimensional content. Starting from the year 2010 to meet increasing 2D to 3D conversion is insufficient to meet demand content was presented as an alternative. But, Convert 2D to 3D stereo effect only emphasizes content production as a three-dimensional visual fatigue and the degradation of the Quality problems are pointed out. In this study, opened in 2011 'Scenes Guan', the 13 selected Scene is made of the three-dimensional transform the content and the Quality of the transformation applied to the Depth-Map is a visual representation of three-dimensional fatigue and, the adequacy of whether the expert has group interviews and surveys were conducted. Many of the changes are applied to the motion picture of the three-dimensional configurations of Depth-Map conversion technology used in many ways before and after the analysis of the relationship of cascade configurations to create a depth map to the stage. Experiments, presented in this study is a three-dimensional configuration of Depth-Map transformation can lower the production of a three-dimensional visual fatigue and improve the results obtained for a reasonable place was more than half of the experiment accepted the expert group to show a positive reaction were. The results of this study with a rapid movement to convert 2D images into 3D images of applying Depth-map configuration cascade manner to reduce the visual fatigue, to increase the efficiency, and has a three-dimensional perception is the result derived.

• Progress in Medical Physics
• /
• v.24 no.4
• /
• pp.220-229
• /
• 2013

Respiratory-induced dynamic tumors render free-breathing cone-beam computed tomography (FBCBCT) images with motion artifacts complicating the task of quantifying the internal target volume (ITV). The purpose of this paper is to study the visibility of the revealed ITV when the imaging dose parameters, such as the kVp and mAs, are varied. The $Trilogy^{TM}$ linear accelerator with an On-Board Imaging ($OBI^{TM}$) system was used to acquire low-imaging-dose-mode (LIDM: 110 kVp, 20 mA, 20 ms/frame) and high-imaging-dose-mode (HIDM: 125 kVp, 80 mA, 25 ms/frame) FBCBCT images of a 3-cm diameter sphere (density=0.855 $g/cm^3$) moving in accordance to various sinusoidal breathing patterns, each with an unique inhalation-to-exhalation (I/E) ratio, amplitude, and period. In terms of image ITV contrast, there was a small overall average change of the ITV contrast when going from HIDM to LIDM of $6.5{\pm}5.1%$ for all breathing patterns. As for the ITV visible volume measurements, there was an insignificant difference between the ITV of both the LIDM- and HIDM-FBCBCT images with an average difference of $0.5{\pm}0.5%$, for all cases, despite the large difference in the imaging dose (approximately five-fold difference of ~0.8 and 4 cGy/scan). That indicates that the ITV visibility is not very sensitive to changes in imaging dose. However, both of the FBCBCT consistently underestimated the true ITV dimensions by up to 34.8% irrespective of the imaging dose mode due to significant motion artifacts, and thus, this imaging technique is not adequate to accurately visualize the ITV for image guidance. Due to the insignificant impact of imaging dose on ITV visibility, a plausible, alternative strategy would be to acquire more X-ray projections at the LIDM setting to allow 4DCBCT imaging to better define the ITV, and at the same time, maintain a reasonable imaging dose, i.e., comparable to a single HIDM-FBCBCT scan.

• Journal of Korea Water Resources Association
• /
• v.39 no.5 s.166
• /
• pp.431-440
• /
• 2006

Recently, water conflicts are rapidly increasing and more serious. So, it needs to establish the reasonable water allocation rules and criteria. This study aims at performing inter-sectoral water allocation with a focus on economic effciency and social utility. To allocate water among the sectoral water uses, water shortage damage functions were estimated and then converged to the utility functions. Finally, each sectoral water uses are allocated by applying 'law equimarginal utility' to maximize social utility. Also weighting factor which reflects scale and characteristic of water demand in a region was estimated to perform the inter-regional water allocation. The water allocation rule was applied to the future water-deficit situation in Han-river basin. As a result, domestic water use was allocated more sufficient agricultural and industrial water use. Also, the water shortage occurs severely in the rural area like Gangwon-do because of its low urbanization and industrialization. This study suggests a alternative view of the economic water allocation which have difficulty under water supply mechanism in Korea.