• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.199-204
• /
• 2000

In this study, an optimum design algorithm using efficient reanalysis is proposed for seismic design of RC Piers. The proposed algorithm for optimization of RC Piers is based on efficient reanalysis technique. Considering structural behavior of RC Piers, several other approximation techniques, such as artificial constraint deletion is introduced to increase the efficiency of optimization. The efficiency and robustness of the proposed algorithm increase the proposed reanalysis technique is demonstrated by comparing it with a conventional optimization algorithm. A few of design examples are optimized to show the applicability of the proposed algorithm.

• 대한수학회지
• /
• 제43권6호
• /
• pp.1159-1167
• /
• 2006

An efficient method for reanalysis of a damaged structures is presented. Perturbation analysis for the equality constrained least squares problem is adapted to handle structural reanalysis, and related theoretical and numerical results are presented.

• 동력기계공학회지
• /
• 제20권4호
• /
• pp.44-51
• /
• 2016

An investigation on reliability of reanalysis wind data was conducted using the met mast wind data at four coastal regions, Jeju Island. Shinchang, Handong, Udo and Gangjeong sites were chosen for the met mast sites, and ERA-Interim and MERRA reanalysis data at two points on the sea around Jeju Island were analyzed for creating Wind Statistics of WindPRO software. Reliability of reanalysis wind data was assessed by comparing the statistics from the met mast wind data with those from Wind Statistics of WindPRO software. The relative error was calculated for annual average wind speed, wind power density and annual energy production. In addition, Weibull wind speed distribution and monthly energy production were analyzed in detail. As a result, ERA-Interim reanalysis data was more suitable for wind resource assessment than MERRA reanalysis data.

• 대기
• /
• 제21권2호
• /
• pp.173-183
• /
• 2011

Production of reanalysis data is important since it contributes to develop all fields of atmospheric sciences and to profit national economy. The developed countries such as USA, EU, and Japan have manufactured the global reanalysis data since the 1990s, but their data present a lack of detailed regional climates. For those who need to analyze the regional climate in/around Korea, a high-resolution reanalysis data should essentially be made. This study reviewed the existing reanalysis data and the applications, and the available observations for the data production. We also investigated the opinions and needs of the potential data users in Korea. We suggest the specifications of the data to have the domain of 55-5N, 80-150E (which includes Mongolia and most Southeast Asian countries), the spatial resolution of 10-20 km, and the period of most recent 30 years. With the specifications and climate models operated in KMA, this study argues that production of the reanalysis data with functional climate information is feasible in both technical and economic aspects. Finally, for successful data production, the framework of the future reanalysis data project was suggested.

• 대기
• /
• 제25권2호
• /
• pp.235-248
• /
• 2015

In this study, we analyzed the three dimensional variations (latitude, longitude, and height of Jet core) and wind speed of upper Jet stream in the East Asian region using recent 35 years (1979~2013) of four reanalysis data (NCEP-R2, MERRA, ERA-Interim. and JRA-55). Most of Jet core is located in $30.0{\sim}37.5^{\circ}N$ and $13.0{\sim}157.5^{\circ}E$ although there are slight differences among the four reanalysis data. The wind speed differences among reanalysis are about $3m\;s^{-1}$ regardless of seasons, the weakest in NCEP-R2 and the strongest in JRA-55. Although significance level is not high, most of reanalysis showed that the Jet core has a tendency of southward moving during spring and winter, but moving northward during summer and fall. This amplified seasonal variation of Jet core suggests that seasonal variations of weather/climate can be increased in the East Asian region. The longitude of Jet core has a tendency of systematically westward moving and decreasing of zonal variations regardless of averaging methods and reanalysis data. In general, the Jet core shows a tendency of moving south-west-ward and upward, getting intensified during spring and winter regardless of the reanalysis data. However, the Jet core shows a tendency of moving westward and downward, and getting weakened during summer. In fall, there were no distinctive trends not only in wind speed but also three dimensional locations compared to other seasons. Although the significance levels are not high and variation patterns are slightly different according to the reanalysis data, our findings are more or less different from the previous results. So, more works are needed to clarify the three dimensional variation patterns of Jet core over the East Asian region as a result of global warming.

• 대기
• /
• 제29권5호
• /
• pp.659-669
• /
• 2019

This study assesses the quality of the total column ozone (TCO) data from five reanalysis datasets against nine independent observation in East Asia. The assessed datasets are the ECMWF Interim reanalysis (ERAI), Monitoring Atmosphere Composition and Climate reanalysis (MACC), Copernicus Atmosphere Monitoring Service reanalysis (CAMS), the NASA Modern-Era Retrospective analysis for Research and Applications, Version2 (MERRA2), and NCEP Climate Forecast System Reanalysis (CFSR). All datasets reasonably well capture the spatial distribution, annual cycle and interannual variability of TCO in East Asia. In particular, characteristics of TCO according to the latitude difference were similar at all points with a maximum bias of less than about 4%. Among them, CAMS and CFSR show the smallest mean bias and root-mean square error across all nine ground-based observations. This result indicates that while TCO data in modern reanalyses are reasonably good, CAMS and CFSR TCO data are the best for analysing the spatio-temporal variability and change of TCO in East Asia.

• Ocean and Polar Research
• /
• 제43권1호
• /
• pp.1-14
• /
• 2021

In this study, extreme wind speeds in the Western North Pacific (WNP) were estimated using reanalysis wind fields synthesized with an empirical typhoon vortex model. Reanalysis wind data used is the Fifth-generation European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis (ERA5) data, which was deemed to be the most suitable for extreme value analysis in this study. The empirical typhoon vortex model used has the advantage of being able to realistically reproduce the asymmetric winds of a typhoon by using the gale/storm-forced wind radii information in the 4 quadrants of a typhoon. Using a total of 39 years of the synthesized reanalysis wind fields in the WNP, extreme value analysis is applied to the General Pareto Distribution (GPD) model based on the Peak-Over-Threshold (POT) method, which can be used effectively in case of insufficient data. The results showed that the extreme analysis using the synthesized wind data significantly improved the tendency to underestimate the extreme wind speeds compared to using only reanalysis wind data. Considering the difficulty of obtaining long-term observational wind data at sea, the result of the synthesized wind field and extreme value analysis developed in this study can be used as basic data for the design of offshore structures.

• Structural Engineering and Mechanics
• /
• 제52권6호
• /
• pp.1121-1134
• /
• 2014

Structural design is usually an optimization process. Numerous parameters such as the member shapes and sizes, the elasticity modulus of material, the locations of nodes and the support constraints can be selected as design variables. These variables are progressively revised in order to obtain a satisfactory structure. Each modification requires a fresh analysis for the displacements and stresses, and reanalysis can be employed to reduce the computational cost. This paper is focused on static reanalysis problem with modification of deleting some supports. An efficient reanalysis method is proposed. The method makes full use of the initial information and preserves the ease of implementation. Numerical examples show that the calculated results of the proposed method are the identical as those of the direct analysis, while the computational time is remarkably reduced.

• Structural Engineering and Mechanics
• /
• 제43권3호
• /
• pp.273-285
• /
• 2012

Structural reanalysis is frequently used to reduce the computational cost during the process of design or optimization. The supports can be regarded as the design variables in various types of structural optimization problems. The location, number, and type of supports may be varied in order to yield a more effective design. The paper is focused on structural static reanalysis problem with added supports where some node displacements along axes of the global coordinate system are specified. A new approach is proposed and exact solutions can be provided by the approach. Thus, it belongs to the direct reanalysis methods. The information from the initial analysis has been fully exploited. Numerical examples show that the exact results can be achieved and the computational time can be significantly reduced by the proposed method.

• Structural Engineering and Mechanics
• /
• 제8권1호
• /
• pp.73-84
• /
• 1999

This paper is concerned with shape optimization problems by the boundary element method (BEM) emphasizing the use of a reduced basis reanalysis technique proposed recently by the author. Problems of this class are conventionally carried out iteratively through an optimizer; a sequential quadratic programming-based optimizer is used in this study. The iterative process produces a succession of intermediate designs. Repeated analyses for the systems associated with these intermediate designs using an exact approach such as the LU decomposition method are time consuming if the order of the systems is large. The newly developed reanalysis technique devised for boundary element systems is utilized to enhance the computational efficiency in the repeated system solvings. Presented numerical examples on optimal shape design problems in electric potential distribution and elasticity show that the new reanalysis technique is capable of speeding up the design process without sacrificing the accuracy of the optimal solutions.