• Transactions on Electrical and Electronic Materials
• /
• v.12 no.4
• /
• pp.144-147
• /
• 2011

In this work, we present a study regarding the etching characteristics on titanium nitride (TiN) thin films using an inductively coupled plasma system. The TiN thin film was etched using a $N_2/BCl_3$/Ar plasma. The studied etching parameters were the gas mixing ratio, the radio frequency (RF) power, the direct current (DC)-bias voltages, and the process pressures. The baseline conditions were as follows: RF power = 500 W, DC-bias voltage = -150 V, substrate temperature = $40^{\circ}C$, and process pressure = 15 mTorr. The maximum etch rate and the selectivity of the TiN to the $SiO_2$ thin film were 62.38 nm/min and 5.7, respectively. The X-ray photoelectron spectroscopy results showed no accumulation of etching byproducts from the etched surface of the TiN thin film. Based on the experimental results, the etched TiN thin film was obtained by the chemical etching found in the reactive ion etching mechanism.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.91-96
• /
• 1987

Plasma etching can obtain less damaged etch surface than reactive ion etching. This study was performed to get anisotropic etching characteristics of Si using two step etching technique with C2CIF5 and SF6 gas mixture. The results show that the etch rate and aspect ratio of silicon was increased with increment of SF6 contents. The bulging phenomenon on trench side wall in the plasma one-step etching technique was eliminated by the two step etching technique. The anisotropy was decreased from 12(at 120m Torr) to 2.2(at 400m Torr) with increasing the chamber pressure. At the low rf power (350 watts) anisotrpy of silicon was obtained 7 lower than that of high rf power (650 watts. A:~9). In Summary we obtained anisotropic etching profiles of silicon with e 6\ulcornerm depth by using the plasma two-step etching technique.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.41-47
• /
• 1999

In this paper, we report 3D-simulations of a plasma etching process by employing cell-removal algorithm takes into account the mask shadow effect os well as spillover errors. The developed simulator haas an input interface to take not only an analytic form but a Monte Carlo distribution of the ions. The graphic user interface(GUI) was also built into the simulator for UNIX environment. To demonstrate the capability of 3D-SURFILER(SURface proFILER), we have simulated for a typical contact hole structure with 36,000($30{\times}40{\times}30$) cells, which takes about 20 minutes with 10 Mbytes memory on sun ultra sparc 1. as an exemplary case, we calculated the etch profile during the reactive ion etching(RIE) of a contact hole wherein the aspect ratio is 1.57. Furthermore, we also simulated the dependence of a damage parameter and the evolution of topography as a function of the chamber pressure and the incident ion flux.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.24-28
• /
• 2007

The etching of zinc oxide (ZnO) thin films has been studied using a high density plasma in a $Cl_2/Ar$ gas. The etch characteristics of ZnO thin films were systematically investigated on varying $Cl_2$ concentration, coil rf power, dc-bias voltage, and gas pressure. With increasing $Cl_2$ concentration, the etch rate of ZnO thin film increased, the redeposition around the etched patterns decreased but the sidewall slope of the etched patterns slanted. As the coil rf power and dc-bias voltage increased, the etch rates of ZnO thin films increased and etch profiles of ZnO thin films were improved. With increasing gas pressure, the etch rate of ZnO thin films slightly increased but little change in etch profile was observed. Based on these results, the optimal etching conditions of ZnO thin film were selected. Finally, the etching of ZnO thin films with a high degree of anisotropy of approximately $75^{\circ}{\sim}80^{\circ}$ without the redepositions and residues was successfully achieved at the etching conditions of 20% $Cl_2$ concentration, coil rf power of 1000 W, dc-bias voltage of 400 V, and gas pressure of 5 mTorr.

• Korean Journal of Materials Research
• /
• v.9 no.1
• /
• pp.86-91
• /
• 1999

We have fabricated high-$\textrm{T}_c$ superconducting $\textrm{YBa}_{2}\textrm{Cu}_{3}\textrm{O}_{7-x}$(YBCO) grain boundary junctions at a step-edge on (001) $\textrm{SrTiO}_3$(STO) substrates. A diamond-like carbon (DLC) film grown by plasma enhanced chemical vapor deposition were used as an ion milling mask to make steps on the STO (100) single crystal and was removed by an oxygen reactive ion etch process. The c-axis oriented YBCO and TO thin films were deposited epitaxially on the STO substrate with a step-edge by pulsed laser deposition. The grain boundary junctions were formed at the top and the bottom of the step. The junctions worked at temperatures above 77 K, and had I\ulcornerR\ulcorner products of 7.5mV at 16K and 0.3 mV at 77K, respectively. The I-V characteristics of these junctions showed the shape of the two noisy resistively shunted junction model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05b
• /
• pp.67-70
• /
• 2001

$SrBi_2Ta_2O_9$ thin films were etched at high-density $Cl_2/CF_4/Ar$ in inductively coupled plasma system. The chemical reactions on the etched surface were studied with x-ray photoelectron spectroscopy and secondary ion mass spectrometry. The etching of SBT thin films in $Cl_2/CF_4/Ar$ were chemically assisted reactive ion etching. The maximum etch rate was 1060 Am /min in $Cl_2$(20)/CF_4(20)/Ar(80). The small addition of $Cl_2$ into $CF_4$(20)/Ar(80) plasma will decrease the fluorine radicals and the increase CI radical. The etch profile of SBT thin films in $Cl_2/CF_4/Ar$ plasma is steeper than in $CF_4$/Ar plasma.Ā저會Ā저ﶖ⨀⡌ឫഀĀ᐀會Ā᐀㡆ﶖ⨀쁌ឫഀĀ᐀會Ā᐀遆ﶖ⨀郞ග堂瀀ꀏ會Āﶖ⨀〲岒ऀĀ᐀會Ā᐀䁇ﶖ⨀젲岒Ā㰀會Ā㰀顇ﶖ⨀끩Ā㈀會Ā㈀ﶖ⨀䡪Ā᐀會Ā᐀䡈ﶖ⨀Ā᐀會Ā᐀ꁈﶖ⨀硫Ā저會Ā저ﶖ⨀샟ගကĀ저會Ā저偉ﶖ⨀栰岒ఀĀ저會Ā저ꡉﶖ⨀1岒Ā저會Ā저Jﶖ⨀惝ග؀Ā؀會Ā؀塊ﶖ⨀ග㼀Ā切會Ā切끊ﶖ⨀⣟ගఀĀ搀會Ā搀ࡋﶖ⨀큭킢Ā저會Ā저

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.328-329
• /
• 2012

$SF_6$ gas는 반도체 및 디스플레이 제조공정 중 Dry etch과정에서 널리 사용되는 gas로 자연적으로 존재하는 것이 아닌 사용 목적에 맞춰 인위적으로 제조된 gas이다. 디스플레이 산업에서 $SF_6$ gas가 사용되는 Dry etch 공정은 주로 ${\alpha}$-Si, $Si_3N_4$ 등 Si계열의 박막을 etch하는데 사용된다. 이러한 Si 계열의 박막을 식각하기 위해서는 fluorine, Chlorine 등이 사용된다. fluorine계열의 gas로는 $SF_6$ gas가 대표적이다. 하지만 $SF_6$ gas는 대표적인 온실가스로 지구 온난화의 주범으로 주목받고 있다. 세계적으로 온실가스의 규제에 대한 움직임이 활발하고, 대한민국은 2020년까지 온실가스 감축목표를 '배출전망치(BAU)대비 30% 감축으로' 발표하였다. 따라서 디스플레이 및 반도체 공정에는 GWP (Global warming Potential)에 적용 가능한 대체 가스의 연구가 필요한 상황이다. 온실가스인 $SF_6$를 대체하기 위한 방법으로 GWP가 낮은 $C_3F_6$가스를 이용하여 $Si_3N_4$를 Dry etching 방법인 RIE (Reactive Ion Etching)공정을 한 후 배출되는 가스를 측정하였다. 4인치 P-type 웨이퍼 위에 PECVD (Plasma Enhanced Chemical Vapor Deposition)장비를 이용하여 $Si_3N_4$를 200 nm 증착하였고, Photolithography공정을 통해 Patterning을 한 후 RIE공정을 수행하였다. RIE는 Power : 300 W, Flow rate : 30 sccm, Time : 15 min, Temperature : $15^{\circ}C$, Pressure : Open과 같은 조건으로 공정을 수행하였다. 그리고 SEM (Scanning Electron Microscope)장비를 이용하여 Etching된 단면을 관찰하여 단차를 확인하였다. 또한 Etching 전후 배출가스를 포집하여 GC-MS (Gas Chromatograph-Mass Spectrophotometry)를 측정 및 비교하였다. Etching 전의 경우에는 $N_2$, $O_2$ 등의 가스가 검출되었고, $C_3F_6$ 가스를 이용해 etching 한 후의 경우에는 $C_3F_6$ 계열의 가스가 검출되었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.160-160
• /
• 2003

This paper describes some of the key issues associated with the patterning of metal electrodes of sub-micron (especially at the critical dimension (CD) of 0.15 $\mu\textrm{m}$) dynamic random access memory (DRAM) devices. Due to reactive ion etching (RIE) lag, the Pt etch rate decreased drastically below the CD of 0.20 $\mu\textrm{m}$ and thus the storage node electrode with the CD of 0.15 $\mu\textrm{m}$ could not be fabricated using the Pt electrodes. Accordingly, we have proposed novel techniques to surmount the above difficulties. The Ru electrode for the stack-type structure is introduced and alternative schemes based on the introduction of the concave-type structure using Pt or Ru as an electrode material are outlined.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.62-65
• /
• 2001

$SrBi_2Ta_2O_{9}$ thin films were etched in inductively coupled $Cl_{2}$/$CF_{4}$/Ar plasma. The maximum etch rate was 1060 $\AA\textrm{m}$/min in $Cl_{2}$/$CF_{4}$/Ar (80). The chemical reactions on the etched surface were studied with x-ray photoelectron spectroscopy. The etching of SBT thin films in $Cl_{2}$/$CF_{4}$/Ar were etched by chemically assisted reactive ion etching. The small addition of $Cl_2$ into $CF_4$(20)/Ar(80) plasma will decrease the fluorine radicals and the increase Cl radical.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.519-524
• /
• 2005

A numerical process to simulate SiO2 dry etching with inductively coupled C2F6 plasmas has been constructed using a commercial CFD code as a first step to design a run-to-run control system. The simulator was tuned to reasonably predict the reactive ion etching behavior and used to investigate the effects of plasma operating variables on the etch rate and uniformity. The relationship between the operating variables and the etching characteristics was mathematically modeled through linear regression for future run-to-run control system design.