• 한국산학기술학회논문지
• /
• 제21권1호
• /
• pp.387-392
• /
• 2020

본 논문은 산업용 밸브의 유량제어시스템을 제안하였다. 산업용 밸브는 주로 배관시스템에 장착되어 유량 및 압력 제어에 사용된다. 제어밸브의 구조 및 작동 방식은 설치환경과 작업용도에 따라 상이하다. 밸브는 그 형태에 따라 그루브 밸브, 버터플라이 밸브 및 볼 밸브 등으로 분류되고, 구동방식은 모터를 이용하거나, 유압 및 공압을 이용하는 것이 일반적이다. 제어밸브를 이용한 유량제어시스템은 유량을 계측하여 피드백시스템을 구현하여야 하지만, 본 논문에서는 고가의 유량센서를 사용하지 않고 밸브의 개폐에 따른 유량변화를 실험하여 밸브 전후단의 압력차와 개폐정도를 이용하는 방법을 제안하였다. 밸브의 유량은 유량계수를 이용하여 밸브 전후단의 압력차와 밸브의 개폐정도로 표현할 수 있으므로 이를 이용하여 유량제어시스템을 설계하였다. 제어입력에 따른 밸브의 개폐를 나타내는 전달함수는 신호압축법을 이용하여 구하였으며, 이를 이용하여 밸브 스템의 명령추종성능을 향상시킬 수 있는 외란관측기를 설계하였다. 제안된 제어시스템의 성능을 검증하기 위해 제어밸브 전후단에 압력센서를 장착하여 제안된 제어방법의 성능이 유량센서를 이용한 경우에 준함을 확인하였다.

• 대한건축학회논문집:구조계
• /
• 제34권10호
• /
• pp.37-44
• /
• 2018

In this study, the effects of considering hourly metabolic rate variations for predicted mean vote (PMV) control on the heating and cooling energy and greenhouse gas emission were investigated. The case adopting PMV control taking the hourly metabolic rate into account was comparatively analyzed against the conventional dry-bulb air temperature control, using a detailed simulation technique. Under the assumption that all the apartments in Korea adopt the PMV control incorporating real-time metabolic rate measurements, nationwide reductions of primary energy and greenhouse gas emission were analyzed. As a result, PMV control considering hourly metabolic rate variations is expected to reduce national primary energy by 6.2% compared to conventional dry-bulb air temperature control, corresponding to reduction of 10,342 GWh. In addition, it turned out that 6.6% of tCO2 emission can be reduced by adopting PMV control, corresponding to nationwide reduction of greenhouse gas emission by approximately 1,720,000 tCO2.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권6호
• /
• pp.1147-1165
• /
• 2011

We present a simple and cost effective rate control scheme for streaming video over a wireless channel by using the information of mobile devices' buffer level. To prevent buffer fullness and emptiness at receivers, the server should be able to adjust sending rate according to receivers' buffer status. We propose methods to adjust sending rate based on the buffer level and discrete derivative of the buffer occupancy. To be compatible with existing network protocols, we provide methods to adjust sending rate by changing the inter-packet delay (IPD) at the server side. At every round-trip time, adjustments of sending rate are made in order to achieve responsiveness to sudden changes of buffer availabilities. A series of simulations and the prototype system showed that the proposed methods did not cause buffer overflows and it can maintain smoother rate control and react to bandwidth changes promptly.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.454-457
• /
• 2000

In this paper, an efficient rate control algorithm based on rate prediction is proposed for maintaining a smooth buffer variation and a small buffer size. The proposed method adjusts the quantization scaling factor by using the predicted bit-rate to meet the target bit budget exactly. Experimental result show that the proposed prediction-based rate control scheme can regulate the bit-rate across scene changes more effectively and achieve better PSNR performance than existing rate control mechanisms such as the MPEG-2 Test Model 5 (TM5) and the Adaptive Scene Analysis (ASA).

• 제어로봇시스템학회논문지
• /
• 제8권12호
• /
• pp.1004-1013
• /
• 2002

A multirate state feedback control (MRSFC) method is proposed for systems sensitive to disturbance and noise based on the multirate estimator design using current estimator. MRSFC updates the controller output slower than the measurement sampling fiequency of system output by a lifting factor $R=T_c/T_s$ The closed-loop MRSFC system is less sensitive to disturbance and noise due to filtering effect than the conventional single-rate control system The multirate estimator gain can be obtained by solving a conventional pole placement problem such that MRSFC has the same spectrum of eigenvalues in the s-plane as the single-rate control. We applied the proposed multirate state feedback controller to a galvanometer servo system Simulation and experimental results show that settling and tracking performances are improved compared with a conventional single-rate pole placement control (PPC).

• 한국멀티미디어학회논문지
• /
• 제9권12호
• /
• pp.1636-1648
• /
• 2006

In this paper, we propose a new optimization approach to the rate control problem in a wired-cum-wireless network. A primal-dual interior-point(PDIP) algorithm is used to find the solution of the rate optimization problem. We show a comparison between the dual-based(DB) algorithm and PDIP algorithm for solving the rate control problem in the wired-cum-wireless network. The PDIP algorithm performs much better than the DB algorithm. The PDIP can be considered as an attractive method to solve the rate control problem in network. We also present a numerical example and simulation to illustrate our conclusions.

• 한국통신학회논문지
• /
• 제21권5호
• /
• pp.1132-1140
• /
• 1996

In video coding systems, an effective rate control method is one of the most improtant issues for the good video quality. This paper presents an adaptive rate control scheme based on the buffer fullness, quantization, and buffer utilization for very low bit rate communication lines, such as 16kbit/s, 24bit/s, and so on. The strategy is implemented on H.263, whichis a vide coding algorithm for narrow band telecommunication channels up to 64kbit/s recommended by ITU-T SG15, to show the effectiveness. The simulation result shows that the suggested rate control scheme has better SNR performance and buffer utilization of source coder than those of linear and non-linear[9] buffer control strategies.

• 한국통신학회논문지
• /
• 제24권10A호
• /
• pp.1555-1562
• /
• 1999

제한된 전송속도와 버퍼크기에 따라 효과적으로 비디오 전송을 하기 위하여 비디오 비트율 제어 기법들이 제안되어 왔다. 그러나 기존의 제안된 기법들에서는 비트율을 제어하는 부호 파라미터, 양자화 크기 등이 일단 영상이 부호화된 다음 얻어진 정보를 바탕으로 조정된다. 그러므로 현재 부호화하는 프레임의 복잡도에 적절하게 비트율을 제어하지 못하거나 지연이 발생하는 단점이 있다. 본 논문에서는 DCT를 기반으로 한 활성도를 이용하여 비트율 예측하는 기법을 제안하였다. 제안된 기법은 비디오 비트율 제어에 효과적으로 적용할 수 있다. 실험을 통하여 제안한 예측기반 비트율 제어 기법이 장면변환 및 갑자기 비트량이 많이 발생하는 프레임에도 잘 적용될 수 있으며, TM5 기법보다도 향상된 PSNR과 비트율 제어 성능을 보였다.

• ETRI Journal
• /
• 제38권1호
• /
• pp.185-194
• /
• 2016

In this paper, a novel rate control scheme for low delay video coding of High Efficiency Video Coding (HEVC) is proposed. The proposed scheme is developed by considering a new temporal prediction structure of HEVC. In the proposed scheme, the relationship between bit rate and quantization step is exploited firstly to formulate an accurate quadratic rate-quantization (R-Q) model. Secondly, a method of determining the quantization parameters (QPs) for the first frames within a group of pictures is proposed. Thirdly, an accurate frame-level bit allocation method is proposed for HEVC. Finally, based on the proposed R-Q model and the target bit allocated for the frame, the QPs are predicted for coding tree units by using rate-distortion (R-D) optimization. We compare our scheme against that of three other state-of-the-art rate control schemes. Experimental results show that the proposed rate control scheme can increase the Bjøntegaard delta peak signal-to-noise ratio by 0.65 dB and 0.09 dB on average compared with the JCTVC-I0094 and JCTVC-M0036 schemes, respectively, both of which have been implemented in an HEVC test model encoder; furthermore, the proposed scheme achieves a similar R-D performance to Wang's scheme, as well as obtaining the smallest bit rate mismatch error of all the schemes.

• 제어로봇시스템학회논문지
• /
• 제17권2호
• /
• pp.190-197
• /
• 2011

In industrial distributed control systems, sensors collect data from the physical environment periodically and transmit them to the actuators, which process the control operations based on the received data. For the effective operation of the control systems, the data transmitted by the sensors has to be delivered to the actuators reliably within the deadline, and if the message reception rate of the actuators becomes lower than a threshold, then the performance of the control systems drops greatly. This paper suggests a message routing protocol to transmit periodic messages reliably in a distributed control system based on wireless sensor networks. For reliable message transmission, the proposed protocol selects a routing path whose end-to-end message reception rate is the highest before transmitting data messages. The proposed protocol has the capability of maintaining a target message reception rate for each flow. To maintain the required target reception rate, each destination monitors the actual message reception rate periodically and transmits a feedback message to the source if it drops below the target reception rate. On receiving the feedback message, the source tries to find a new path which can satisfy the target rate. The performance of the proposed protocol has been evaluated using simulation and compared with other protocols in terms of the message reception rate, the message delay and delay jitter, and so on. The simulation results show that the proposed protocol has a higher message reception rate and comparable message delay and delay jitter to other protocols. The simulation results also show that the proposed protocol has an ability to adapt well to the dynamic network traffic change.