• 한국광학회지
• /
• 제22권3호
• /
• pp.129-133
• /
• 2011

2-파장 홀로그래피에서 수정된 화인 맵을 이용하여 2-파장 홀로그래피에서 발생하는 잡음 증폭현상을 줄이는 연구를 수행하였다. 일반 적인 화인 맵은 측정체의 단차가 2-파장 홀로그래피에 사용되는 광원의 파장보다 작은 경우에는 잡음을 잘 줄일 수 있으나, 단차가 파장 보다 큰 경우에는 측정 결과에 영향을 주어 잘못 된 측정 결과를 보인다. 이러한 오차를 줄이기 위하여 수정된 화인 맵을 이용하였으며, 그 결과 측정체의 단차가 파장 보다 큰 경우에도 측정에 영향을 주지 않고 잡음을 줄일 수 있음을 확인 하였다.

• 한국군사과학기술학회지
• /
• 제10권1호
• /
• pp.5-13
• /
• 2007

The trajectory of an current artillery munition is subject to a variety of different error sources resulting in more or less big deviation from the nominal predicted flight path. The 1D CCM(Course Correction Munition) has appeared to solve this problem and the mechanism of 1D CCM is a simple and low cost one using the influence of drag to range behavior of an artillery munition. In the paper 1D CCM concept has been simulated using wind tunnel experiment results of the specified Korean munition with CCF(Course Correction Fuze) and calculated the performance of its rang error reduction. From the simulated results it can be numerically explained that the possibility of adaptation of 1D CCM concept to Korean artillery munitions.

• 한국전자파학회논문지
• /
• 제19권2호
• /
• pp.152-160
• /
• 2008

본 논문에서는 위상 잡음의 거리 상관 효과에 따른 직접 변환 방식의 UHF 대역 RFID 리더의 성능을 분석한다. UHF RFID 시스템은 일반적 인 무선 통신 방식과는 다르게 송신 캐 리어를 발생하는 LO 신호가 동시에 수신기의 국부 발진기로 사용되며, 이에 따라 태그 신호와 LO 신호 간의 거리 상관 효과에 의한 주기적인 신호 간섭 및 위상 잡음 감소 효과가 발생한다. 주기적인 신호 간섭 효과는 이론 및 시뮬레이션을 통해 I와 Q신호를 I/Q 다이버시티 개념으로 전력 결합함으로써 제거할 수 있음을 확인하였다. 위상 잡음 감소 효과는 전형적인 UHF 대역에서 동작하는 LO의 위상 잡음에 대한 전력 밀도 스펙트럼이 태그-리더 거리 및 옵셋 주파수에 따라 변화됨을 확인하였고, 이를 이용하여 심볼 에러 성능을 시뮬레이션 하였다. 시뮬레이션 결과, 심볼 에러에서 위상 잡음의 영향은 태그 변조 방식 중 PSK에서 특히, 변조 각도가 작을 때 크게 나타나지만, 거리 상관 효과에 의해 실제 위상 잡음이 감소되어 그 영향이 미비해짐을 확인하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권10호
• /
• pp.708-711
• /
• 2000

Sensorless PMSM is much studied for the industrial applications and home appliances because a mechanical sensor reduce reliability and increase cost. Most of sensorless algorithms are based on motor equations, and so the magnitude of phase voltage and current should be exactly obtained. However, the inverter output voltage applied to PMSM has relatively large error in the low speed range, and a relatively poor response is shown in the low speed range. This paper investigates the improved performance of sensorless PMSM in the low speed range. This paper proposes the error reduction of inverter output voltage which is realized through the variable link voltage. The proposed algorithm is verified through simulation and experiment.

• 전기학회논문지
• /
• 제66권2호
• /
• pp.339-346
• /
• 2017

This paper proposes a sensorless control method to improve the performance of an internal permanent magnet synchronous motor (IPMSM) control by using a full-order flux observer in a wide speed range. The conventional sensorless control method uses a constant gain for high performance at low-speed region. However, this method has drawbacks such as an increased angle error and current ripple in the high-speed region due to the fixed gain value. In order to overcome this problem, the gain of the full-order flux observer is changed by considering the angle error in the whole speed range. The proposed method minimizes the angle error for each region of the speed range by applying a relevant gain value, which improves the current ripple reduction and motor noise cancellation. The validity of proposed sensorless control method is verified by a simulation and an experiment.

• 한국정밀공학회지
• /
• 제14권3호
• /
• pp.107-113
• /
• 1997

This paper presents the active control of a flexible cantilever beam vibration. The cantilever beam was excitied by a steady-state harmonic and white noise point force and the control was performed by one piezo ceramic actuator bonded to the surface of the beam. An adaptive controller based on filtered-x LMS algorithm was used and the controller was defined by minimizing the square of the response of error sensor. In the experiment, gap sensor was used as an error sensor while the sinusoidal or white noise was applied as a disturbance. In the case of sinusoidal input, more than 20 dB of vibration reduction was achieved over all range of the natural frequencies and it takes 5 seconds to control the vibration at first natural frequency and 1 second at other natural frequencies. In the case of white noise input, 7 dB of vibration reduction was achieved at the first natural frequency and good control performance was achieved in the considered whole frequency range. Results indicate that the vibration of a flexible cantilever beam could be controlled effectively when the piezo ceramic actuator was used with filtered-x LMS algorithm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.436-441
• /
• 2008

One of important factors in designing array-type MEMS resonators is obtaining a desired frequency response function (FRF) within a specific range. In this paper Krylov subspace-based model order reduction using moment-matching with non-zero expansion points is represented to calculate the FRF of array-type resonators. By matching moments at a frequency around a specific range of the array-type resonators, required FRFs can be efficiently calculated with significantly reduced systems regardless of their operating frequencies. In addition, because of the characteristics of moment-matching method, a minimal order of reduced system with a specified accuracy can be determined through an error indicator using successive reduced models, which is very useful to automate the order reduction process and FRF calculation for structural optimization iterations.

• 소음진동
• /
• 제4권1호
• /
• pp.71-82
• /
• 1994

We propose a systematic method to select the master states, which are retained in the reduced model after the order reduction process. The proposed method is based on the fact that the range space of right eigenvector matrix is spanned by orthogonal base vectors, and tries to keep the orthogonality of the submatrix of the base vector matrix as much as possible during the reduction process. To quentify the skewness of that submatrix, we define "Absolute Singularity Factor(ASF)" based on its singular values. While the degree of observability is concerned with estimation error of state vector and up to n'th order derivatives, ASF is related only to the minimum state estimation error. We can use ASF to evaluate the estimation performance of specific partial measurements compared with the best case in which all the state variables are identified based on the full measurements. A heuristic procedure to find suboptimal master states with reduced computational burden is also proposed. proposed.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.332-336
• /
• 2004

This paper describes the remote tracking algorithm using measurements (azimuth, elevation, and slant range) of the radar ground station. Kalman filter model for noise reduction of the measured information is first derived by linearizing with respect to angle, angular rate, range, and range rate. And then a tracking algorithm is introduced to calculate the position of the vehicle during in-flight. The simulation results show that the algorithm is practical and effective enough tracking position of the vehicle in considerably less error.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.91-97
• /
• 2014

This study aims to suggest a measure to reduce industrial accident and secure adaptation to the industrial safety regulation policies by empirically establishing the effects of stress from adaptation to the industrial safety regulation on the human error, one of direct causes of industrial accident to the target groups of the industrial safety regulation policies. This study as for content range examines the stress from adaptation to the industrial safety regulation, job satisfaction, human error, and as for spatial range, this study performed an empirical research on the workers of 24 companies located within Chungcheong region centers district among 153 companies nationwide that uses 7 chemicals by introducing PSM (process safety management) system of the Ministry of Employment & Labor as of January 2012. Based on these results and suggestions there are five(5) necessities to reduce industrial safety regulations adaptation stress and human error generation, first(1st) is the necessity of understanding influential factors to stress, second(2nd) is the necessity to customized vocational training, third(3rd) is improving enhance system of job satisfaction, forth(4th) is preparing stress-reduction program, and fifth(5th) is introducing on-site restrictive action of advanced country as politics items.