• 제목/요약/키워드: Rainfall storage tank

검색결과 27건 처리시간 0.011초

건축물 지붕과 연결된 빗물저류조의 적정 규모 결정에 관한 고찰: 수원지역을 중심으로 (A Discussion on Determination of Suitable Size of Rain Tank Connected to Building Roof in Suwon District)

  • 노희성;안태진
    • 한국습지학회지
    • /
    • 제24권3호
    • /
    • pp.161-169
    • /
    • 2022
  • 본 연구에서는 수원지방에서 효율적이고 타당한 빗물저류조의 용량을 평가하기 위하여 수원강우관측소의 월평균강수량, 일강수량변동곡선 및 일강우일수를 분석하였다. 빗물저류조 용량별 연평균빗물사용량 및 일평균저수량은 빗물저류조내 유입되는 일강수량, 일수요량, 빗물저류조의 용량 등을 일단위 연속방정식에 적용하여 산정하였다. 빗물저류조 용량별 연평균빗물사용량, 이용효율, 저류조 사용일수, 저류조의 일평균저수량, 일별수요량 등을 감안하여 빗물저류조의 용량을 평가하면 물의 재이용 관련 법령에서 제시한 활용강우량 50.0mm 이상은 과다한 빗물저류조의 용량인 것으로 판단된다. 따라서 지역별로 타당하게 제시될 일별 수요량, 빗물사용량에 따른 빗물저류조 용량별 편익, 빗물저류조 용량별 설치비용 등을 감안하여 빗물 저류조의 활용강우량 즉 빗물저류조의 용량을 결정하는 것이 합리적임을 보여주었다.

지하 빗물저류시설의 설치에 따른 유출 저감 효과 분석 (Reduction Rate of the Total Runoff Volume though Installing a Rainfall Storage Tank in the Sub-Surface)

  • 최계운;최종영;이진원
    • 한국수자원학회논문집
    • /
    • 제36권3호
    • /
    • pp.455-464
    • /
    • 2003
  • 본 연구에서는 지하 빗물저류시설 설치에 따른 유출저감 효과를 분석하기 위하여 실험실내 모형 빗물저류장치를 설치하여 강우강도 변화, 표층의 피복상태 변화, 표면경사 변화에 따른 유출량 변화 실험을 실시하였다. 실험결과 대상하천인 승기천의 토양조건하에서 강우강도가 40mm/hr-100mm/hr일 때 총유출량 감소는 42.3-52.9%로 나타났으며, 지하 빗물저류시설을 설치하는 경우 총유출량과 첨두유량의 감소를 가져올 수 있을 것으로 판단된다. 경사변화에 따른 총유출량의 변화는 완만한 경사에서는 매우 크게 나타났으나 3%이상의 급경사에서 침투에 의한 저류량에 변화가 적고, 이는 산지와 같은 급경사지역에 빗물저류시설을 설치하는 경우 장기간의 홍수에 대하여 상당한 효과를 나타내는 것으로 나타났다. 따라서, 본 시스템은 하천이나 산지의 급경사에도 큰 결과를 기대할 수 있다.

합류식하수도 월류수 관리를 위한 초기우수 저류조 설계방안 연구 (A Study on First Flush Storage Tank Design for Combined Sewer Overflows (CSOs) Control)

  • 손봉호;어성욱
    • 한국물환경학회지
    • /
    • 제27권5호
    • /
    • pp.654-660
    • /
    • 2011
  • One of the best way to control Combined Sewer Overflow (CSO) is proposed to construct first flush storage tank. But there is little known parameters for optimum design of these facilities. This study was conducted to get optimum design parameters for a first flush storage tank construction. The optimization of the tank is generally based upon some measure of SS(Suspended Solid) mass holding efficiency. Water quality deterioration of receiving water body happened right after first time occurring rainfall in dry weather seasons. So, design rainfall intensity is used at 2 mm/hr for peak of monthly average intensities of dry seasons. The capacities for each evaluated catchment are designed from 14.4 min to 16.1 min HRT of CSOs flow at design rainfall intensity. Owing to all storage tanks are connected to interception sewer having a redundancy, the suggested volume could be cut down.

Tank Model을 이용한 산지토사재해 경계피난 기준우량 산정법 개발 및 검토 (Development and Verifying of Calculation Method of Standard Rainfall on Warning and Evacuation for Forest Soil Sediment Disaster in Mountainous Area by Using Tank Model)

  • 이창우;윤호중;우충식
    • 한국산림과학회지
    • /
    • 제98권3호
    • /
    • pp.272-278
    • /
    • 2009
  • 산지토사재해 발생시기 예측정도를 높이기 위해 사용되고 있는 산지토사재해 기준우량 산정방법에 대해 수문모형인 Tank 모델의 적용수법을 개발하였다. 개발된 방법과 저류관수법에 의한 결과의 비교 검토로 향후 적용가능성도 검토하였다. 산사태 발생시기 기록이 있는 36개의 산사태를 대상으로 저류관수법과 개발된 Tank 모델에 의한 방법을 적용하여 재해발생시기와 최대저류량과의 관계를 검토한 결과, 퇴적암 4기의 경우 Tank 모델에 의한 산사태 발생 예측시기는 1.6시간의 차이를 보였으나, 저류관수법에서는 3.2시간 차이를 보였다. 또한, 최대저류량의 편차가 Tank 모델의 경우 7%에 불과하나, 저류관수법의 경우 63%의 큰 편차를 보였다. 산사태 발생강우를 대상으로 최대저류량 값들 중 가장 작은 값을 위험기준우량으로 설정하여 대상지역의 5년간(1993~1997) 실제 강우량을 적용한 결과, Tank 모델에 의한 피난대기시간이 저류관수법보다 약 2배 작은 것으로 나타났다. 따라서, 본 연구에서 개발된 Tank 모델에 의한 산지토사재해 위험기준우량 산정이 저류관수법보다 정도 및 실용적인 측면에서도 우수하여 향후 충분히 활용 가능한 방법으로 판단되었다.

지하저류조 신설에 따른 우수 유출량 저감 (Reduction of Rainfall Runoff by Constructing Underground Storage Tank)

  • 송창근;서일원;정영재
    • 대한토목학회논문집
    • /
    • 제33권3호
    • /
    • pp.927-935
    • /
    • 2013
  • 본 연구에서는 서울대학교 댐 하류 노천강당 유역과 공대폭포 유역에 지속시간 1시간 50년 빈도 강우에 관한 저수지 홍수추적을 실시하고 지하저류조가 설치되는 경우 다음의 사항에 초점을 맞추어 분석을 수행하였다 (1) 저류조의 저류량; (2) 우수유출량 및 첨두수위의 저감정도; (3) 지체시간 변화; (4) 신설 지하저류조의 유출입부 암거 설계. 노천강당 유역에 $25,000m^3$ 저류조가 설치되는 경우 총 유입량 대비 49.43 %의 저류효과가 발생하고 49.64 %의 첨두 유량 감소효과와 28분의 지체시간 증대효과를 얻을 수 있었으며, 첨두 수위는 $15,000m^3$ 저류조에 비해 35 cm 낮게 나타났다. 기존 저류시설과 신설 지하저류조의 공동 운영을 통해, 홍수 발생 시 댐 유역에서 초과되는 유출량을 탄력적으로 관리할 수 있는 것으로 판단된다.

친환경 도시에서의 자원활용에 관한 연구 -빗물의 다목적 활용을 위한 빗물저장조의 운전방법 - (Study on Utilizing Resources in Environment-friendly City - Operation method of rain storage tank for using rainwater as multipurpose -)

  • 정용현
    • 한국환경과학회지
    • /
    • 제12권3호
    • /
    • pp.359-366
    • /
    • 2003
  • Ecological society and energy conservative systems has become a subject of world wide attention. To examine the technologies of such systems as resource recycling society, this study is proposed for using rainwater as energy source and water resources in urban area. Useful informations for planning of utilizing rainfall as energy source, water resources, emergency water and controlling flood are discussed with model systems in urban area. It is calculated that the rate of utilizing rainwater, amounts of utilizing rainwater, substitution rate of supply water, amounts of overflow rainwater according to rain storage tank volume. By applying the past weather data, The optimum volume of rain water storage was calculated as 200m$^3$ which mean no benefits according to the increase of storage tank volumes. For optimum planing and control method at the model system, several running method of rainwater storage tank was calculated. The optimum operating method was the using weather data as 3hours weather forecast.

강우-유출모형의 매개변수 보정을 위한 최적화 기법의 비교분석 (The Comparative Analysis of Optimization Methods for the Parameter Calibration of Rainfall-Runoff Models)

  • 김선주;지용근;김필식
    • 한국농공학회논문집
    • /
    • 제47권3호
    • /
    • pp.3-13
    • /
    • 2005
  • The conceptual rainfall-runoff models are used to predict complex hydrological effects of a basin. However, to obtain reliable results, there are some difficulties and problems in choosing optimum model, calibrating, and verifying the chosen model suitable for hydrological characteristics of the basin. In this study, Genetic Algorithm and SCE-UA method as global optimization methods were applied to compare the each optimization technique and to analyze the application for the rainfall-runoff models. Modified TANK model that is used to calculate outflow for watershed management and reservoir operation etc. was optimized as a long term rainfall-runoff model. And storage-function model that is used to predict real-time flood using historical data was optimized as a short term rainfall-runoff model. The optimized models were applied to simulate runoff on Pyeongchang-river watershed and Bocheong-stream watershed in 2001 and 2002. In the historical data study, the Genetic Algorithm and the SCE-UA method showed consistently good results considering statistical values compared with observed data.

저수량 오차를 목적함수로 한 저수지 일 유입량 모의 (Simulation of Daily Reservoir Inflow using Objective Function Based on Storage Error)

  • 노재경
    • 한국농공학회지
    • /
    • 제42권4호
    • /
    • pp.76-86
    • /
    • 2000
  • The objective function of reservoir storage error was suggested to simulate daily reservoir inflow. DAWAST model, UMAX, LMAX, FC,CP, CE were calibrated. Daily reservoir inflow was imulated with calibrated parameters and reservoir storage was simulated on a daily basis. The simulated results were compared with the monthly results by Gajiyama equation and ten-day results by Tank rainfall-runoff model through equal value lines and hydrographs . DAWAST model showed the best results compared with Gajiymama equation and Tank model. Especially, DAWAST model showed a good agreement in dry periods. NEW concept using objective function of storage error was believed to be satisfactory and to be applied in estimating reservoir inflow.

  • PDF

VALUATION OF A MULTI-STAGE RAINWATER HARVESTING TANK CONSTRUCTION USING A REAL OPTION APPROACH

  • Byungil Kim;Hyoungkwan Kim;SangHyun Lee
    • 국제학술발표논문집
    • /
    • The 5th International Conference on Construction Engineering and Project Management
    • /
    • pp.386-389
    • /
    • 2013
  • Under climate change and urbanization, rainwater harvesting (RWH) systems are emerging as an alternative source of water supply because of growing concern about water sustainability. RWH systems can satisfy the various watering needs and provide the environmental benefits of lessening the damages from flood, drought, and runoff. The economic success of a RWH system is vitally concerned with the determination of the design capacity of storage tank to be built in the system. The design capacity is determined by the factors of average annual rainfall, period of water scarcity, and water price during the whole life-cycles. Despite the high uncertainties inherent in these factors, the current engineering design of RWH system construction often assumes that storage tanks should be built all at once. This assumption implicitly ignores the managerial flexibility in responds to the future as new information comes out-the right to build storage tanks stage by stage depending on the evolution of demand. This study evaluates the value of a multistage storage tank construction using a real option approach. A case study involving a typical RWH system construction in Jeonju, the Republic of Korea is conducted. The managerial flexibility obtained from the real option perspective allows engineers to develop investment strategies to better cope with the issue of water sustainability.

  • PDF

빗물이용의 수문학적 평가: 1. 수문해석 (Hydrological Evaluation of Rainwater Harvesting: 1. Hydrological Analysis)

  • 유철상;김경준;윤주환
    • 한국물환경학회지
    • /
    • 제24권2호
    • /
    • pp.221-229
    • /
    • 2008
  • This study revised a model for hydrologically analyzing rainwater harvesting facilities considering their rainfall-runoff properties and the data available. This model has only a few parameters, which can be estimated with rather poor measurements available. The model has a non-linear module for rainfall loss, and the remaining rainfall excess (effective rainfall) is assumed to be inflow to the storage tank. This model has been applied for the rainwater harvesting facilities in Seoul National University, Korea Institute of Construction Technology, and the Daejon World Cup Stadium. As a result, the runoff coefficients estimated were about 0.9 for the building roof as a rainwater collecting surface and about 0.18 for the playground. This result is coincident with that for designing the rainwater harvesting facilities to show the accuracy of model and the simulation results.