• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.4
• /
• pp.482-490
• /
• 2017

The radar signal processing procedure is divided into the pre-processing such as frequency down converting, down sampling, pulse compression, and etc, and the post-processing such as doppler filtering, extracting target information, detecting, tracking, and etc. The former is generally designed using FPGA because the procedure is relatively simple even though there are large amounts of ADC data to organize very quickly. On the other hand, in general, the latter is parallel processed by multiple DSPs because of complexity, flexibility and real-time processing. This paper presents the radar signal processor design using FPGA which includes not only the pre-processing but also the post-processing such as doppler filtering, bore-sight error, NCI(Non-Coherent Integration), CFAR(Constant False Alarm Rate) and etc.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.8
• /
• pp.673-681
• /
• 2002

This paper presents a new algorithm for estimating pulse repetition intervals (PRIs) of stagger PRI pulse trains using a 2 dimensional TDOA histogram. The PRI transform algorithm can remove harmonics of stable and jitter PRI pulse trains in a TDOA histogram. But, it is impossible for the algorithm to detect stagger PRI pulse trains because it regards frame PRIs of stagger Pulse trains as harmonics of stable PRI pulse trains. A new algorithm of this paper has an ability to distinguish stagger pulse trains from harmonics of other pulse trains and to estimate frame PRIs of detected pulse trains.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.1
• /
• pp.66-74
• /
• 2012

The virtual target signal generator was developed to verify the shipborne tracking radar performance. It was used to DRFM(Digital RF Memory) method to generate the virtual moving targets. The target signal includes Doppler shift and RCS according to the target motion. And the signal generator can make jamming signal and clutter to test shipborne radar performance at real environmental condition. This paper described the functional diagram and the hardware configuration items to meet the test requirements for the tracking radar. And it showed the critical design points for the sub-systems. The signal generator which was developed in this paper shared the operational information of the radar with the radar command and control part. To test the frequency agility of the radar, it had the local oscillator which could do high speed frequency switching according to radar information. By communicating between the signal generator and the radar command and control part, the local oscillator of signal generator could be controlled every pulse. It reduced the instantaneous bandwidth of signal generator and minimized the spurious. So it lowered the probability of generating wrong targets.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.8
• /
• pp.838-848
• /
• 2014

We present a simulation study of an algorithm for the range and angle of arrival(AOA) estimation with an interferometric synthetic aperture radar(InSAR) altimeter using a real digital elevation model(DEM). We also illustrate a step-by-step procedure of generating raw InSAR data, as well as their range and azimuth compressed data, which is to be used for the subsequent altitude and angle estimation. The AOA is estimated using a deterministic maximum likelihood estimator(DMLE) applied to the first arrived point for each pulse in the compressed data obtained with three antennas. The range bin size and the pulse repetition interval(PRI) are much smaller than the cell size of the DEM used in this study. To make the DEM compatible to the radar parameters, we first generate a higher resolution DEM by linearly interpolating the given DEM. After a brief description of the principle of the InSAR altimeter, the algorithms for altitude and angle estimation are presented, and their performance is assessed through simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.172-182
• /
• 2014

In this paper, is is presented the result of design and fabrication for X band T/R module using in active array radar. The high power RF circuit was fabricated using GaN element, so that high power and high efficiency was fulfilled comparing with the previous T/R module that have under 50 W output power for X band. Designed X band T/R module demonstrated 200 W(53 dBm) peak power, 20 us pulse width with 0.4 dB pulse droop and 20 % duty cycle. And it has characteristics of 26 dB receive gain and 4.5 dB noise figure. The structure was applied to prevent serious damage of receive path and GaN HPA by transmitting power during trasmit time of a pulse radar.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1147-1156
• /
• 2001

In this paper, a new design architecture of radar signal processor in real time is proposed. It has been designed and implemented under the consideration to minimize the inter-processor communication overhead and to maintain the coherence in Doppler pulse domain and in range domain. Its structure can be easily reconfigured and reprogrammed in accordance with an addition of function algorithm or a modification of operational scenario. As we designed a task configuration for parallel processing from measures of computation time for function algorithms and transmission time for results by signal processing, data exchange between processors for performing of function algorithms could be fully removed. Morocco-2 board equipped ADSP-21060 processor of Analog Devices inc. and APEX-3.2 developed for SHARC DSP were used to construct the radar signal processor.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.322-327
• /
• 2020

Recently, a research on obtaining a vital signal using a Doppler radar has been developed and is used as a technology applied to patients in bed. However, in the case of the measured pulse, the respiration signal is generated as noise, resulting in a problem of lowering accuracy. In this paper, we propose a bio-signal measurement algorithm based on the sampling point to improve the accuracy of the signal for measuring the pulse rate when measuring bio-signals using a Doppler radar. The proposed algorithm improves the accuracy of the measured bio-signal by removing noise generated when measuring biosignals based on two sampling points. Compared with actual medical equipment and existing bio-signal algorithms, it is more than 90% similar to medical equipment. In addition, it was confirmed that severe amplitude change was minimized compared to the existing algorithm.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.2
• /
• pp.93-98
• /
• 2024

This paper presents the method to extract the ultrawide-band (UWB) signal and proposes the simple impulse radar system for sensing real-based target within close-range area. The proposed impulse radar system consists of impulse generator, ultrawide-band antennas, function generator, and digital oscilloscope. It is verified by experiment that a differentiated Gaussian pulse is generated with 200ps of pulse width and corresponding spectrum from 0.3 to 4.7 GHz once a sinusoidal wave with 10MHz is excited. The Gaussian doublet is received by identical antennas and it is shown that the UWB pule width of 328ps and its spectrum is from 0.9 to 4.4 GHz. It is confirmed that the UWB pulse is extracted when the real-based targets such as circular target with 4cm radius and corner reflector are placed at the close-range area.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.707-714
• /
• 2016

Active driving safety systems for vehicle, such as the front collision avoidance, lane departure warning, and lane change assistance, have been popular to be adopted to the compact car. For improving performance and competitive cost, FMCW radar has been researched to adopt a phased array or a multi-beam antenna, and to integrate the front and the side radar. In this paper we propose several efficient methods to implement the signal processing module of FMCW radar system using low cost DSP. The pulse width modulation (PWM) based analog conversion, the approximation of time-eating functions, and the adoption of vector-based computation, etc, are proposed and implemented. The implemented signal processing board shows the real-time performance of 1.4ms pulse repetition interval (PRI) with 1024pt-FFT. In real road we verify the radar performance under real-time constraints of 10Hz update time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.1986-1995
• /
• 2013

The ELINT system which derives intelligence from electromagnetic radiations plays an important role in modern electric warfares. Among radar characteristics inferred from the signals, intra-pulse modulation scheme is a useful feature to identify modern radars. This paper proposes the method to classify intra-pulse modulation schemes such as UM, PSK, BFSK, QFSK, LFM and NLFM based on the fuzzy algorithm. The proposed method defines fuzzy membership functions to characterize input signals, and then it calculates accordance rates for each modulation scheme with fuzzy inference rules. The experimental results show that the probability of correct recognition is more than 95% for SNR > 10dB.