Abstract
Recently, a research on obtaining a vital signal using a Doppler radar has been developed and is used as a technology applied to patients in bed. However, in the case of the measured pulse, the respiration signal is generated as noise, resulting in a problem of lowering accuracy. In this paper, we propose a bio-signal measurement algorithm based on the sampling point to improve the accuracy of the signal for measuring the pulse rate when measuring bio-signals using a Doppler radar. The proposed algorithm improves the accuracy of the measured bio-signal by removing noise generated when measuring biosignals based on two sampling points. Compared with actual medical equipment and existing bio-signal algorithms, it is more than 90% similar to medical equipment. In addition, it was confirmed that severe amplitude change was minimized compared to the existing algorithm.
최근 도플러 레이더를 이용하여 생체 신호를 획득하는 연구가 개발되어 병상의 환자들에게 적용되는 기술로 사용되고 있다. 하지만 측정되는 맥박의 경우 호흡 신호가 잡음으로 발생하여 정확도가 낮아지는 문제가 발생한다. 본 논문에서는 도플러 레이더를 이용하여 생체신호를 측정할 때 맥박을 측정하기 위한 신호의 정확도를 향상시키기 위한 샘플링 시점 기반의 생체 신호 측정 알고리즘을 제안한다. 제안하는 알고리즘은 두 개의 샘플링 시점을 기반으로 생체 신호 측정 시 발생되는 잡음을 제거하여 측정 생체 신호의 정확도를 높이는 것으로 실제 의료 장비 및 기존 생체 신호 알고리즘과 비교하였을 때, 의료 장비와 90% 이상의 유사함을 보이며, 또한 기존 알고리즘에 비해 심한 진폭의 변화가 최소화 된 것을 확인하였다.