• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1445-1447
• /
• 2004

In recent years, the smart card is widely applied for wireless communication, tracking, transportation logistics, diagnostic monitoring, access control and security. RF-ID system is universally applicable. Passive RF-ID system consists of reader and passive tag. The reader transmits energy and simple information to a tag by wireless and the power from the reader is transformed for controller, FRAM and Bluetooth module. In this paper, proposed for the improvement of wireless power transmission and demonstrated the propriety through experiments in several conditions.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.550-552
• /
• 2014

차량 내부 네트워크는 LIN, CAN, FlexRay와 같은 제어 네트워크와 MOST와 같은 멀티미디어 네트워크가 있으며 이 내부 네트워크와 연결해 서비스를 사용하는 RF 통신으로는 대표적으로 블루투스, GSM, NFC가 있다. 그러나 능동 안전 시스템과 같은 지능형 기술의 지속적인 도입과 기계, 유압식 기기의 전자화에 따른 네트워크상의 통신량이 급격히 증가하면서 네트워크의 규모 및 통신 복잡도 등이 증가하고 있다. 따라서 차량 내/외부 네트워크의 최적화, 최소화 문제가 반드시 해결되어야하는 문제로 떠오르고 있다. 또한 이러한 통신환경이 갖추어진 이후에도 무선통신 기술의 성능향상 및 통신기술과 응용 서비스 분야와의 연계, 그리고 통신서비스를 위한 사업 모델 개발이 요구되는 등 앞으로 해결 해야하는 문제는 여전히 많이 남아 있다고 할 수 있다. 본 논문에서는 지능형 자동차의 RF 통신서비스에서 발생할 수 있는 지능형자동차의 보안위협 요소를 분석하고자 한다.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.102-107
• /
• 2021

In this paper, the measurements of received power was shown and compared in two developed 5.8GHz 25W wireless charging systems. One is the system using commercial transmission antenna, and the other is the system using transmission antenna combined with metamaterial. The system combined with metamaterial shows higher received power due to negative reflective index of metamaterial. In addition, a comparative analysis of the systems shows that the transmission efficiency in the systems can decrease the real gain of transmission antenna due to higher side robe of beam pattern. The side robe beams of transmitting antenna interferes transmitted beam with the reflected beams from the bottom region due to the side robes. The failure problems of the RF wireless charging systems are discussed and proposed in order to charge mobile devices through the RF wireless charging system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.1406-1409
• /
• 2010

본 연구에서는 호출기를 착용한 환자가 낙상/전도 사고를 당했을 때, 자동으로 구조요청 하는 시스템을 개발하고자 한다. 자동 호출기에는 사고의 감지, 사고발생 위치의 추적, 관제센터로의 통신 등의 기능이 필요하다. 이를 위해 3축 가속도센서를 탑재하고, 낙상판단 알고리즘을 구현하여, MCU에 포팅하고, RF 송수신기와 알람을 집적하였다. 자동 호출기와 관제소와의 통신방법으로는 400MHz 대역의 RF 송수신기를 채택하였다.

• The Magazine of the IEIE
• /
• v.39 no.8
• /
• pp.51-58
• /
• 2012

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1252-1263
• /
• 2009

In this paper, in order to improve a service quality and to broaden the service coverage in the mobile communication system a study on a digital RF repeater employed with an Interference Cancellation System(ICS) is performed. The digital RF repeater employed with an ICS is implemented to remove interference and feedback signals which are disadvantages of a conventional(or general) RF repeater. This thesis presents the design and experiments of the new wireless repeater. The proposed wireless repeater consists of a RF repeater mounted with digital engine. The digital ICS engine consists of a DSP and FPGA. The digital engine and RF circuit are designed into a one-piece. After developing hardware through the digital platform they are also designed and fabricated into a one-piece in order to apply a best performance repeater system. The method of removing interference and feedback signals is an adaptive IF technique employed with a LMS algorithm. The powerful performance and fast convergence speed is obtained by using this method.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.282-289
• /
• 2019

Reflective and solar LED road studs are being used as a way of securing visibility for road environments. Road markers have various advantages and disadvantages in terms of versatility, efficiency, simplicity and visibility as individual products of reflective type and solar LED. However, in addition to the above, it is possible to prevent secondary accident after accident, It has a common drawback that it is difficult to have. In this paper, we propose a road stud system incorporating a wireless control function using RF - based communication with existing solar LED road studs and a system for controlling them. The proposed system is called the smart road stud system and it can control the equipment through the central control unit and the relay unit connected to the central control room by incorporating the RF communication function in the existing solar LED road stud. In addition, since it is possible to control the lighting method, color, etc. according to the road condition, it is possible to provide the driver with the state of the road to perform the function for preventing the second accident after the accident. It also adds features that minimize the ongoing power consumption of LED and RF communications. In order to verify the validity of the proposed system, prototypes were produced and it was confirmed that it is possible to act as a university for prevention of accident after accident by linking with other traffic system besides accident prevention function by securing existing visibility.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10b
• /
• pp.526-528
• /
• 2004

본 논문은 센서 네트워크 환경에서 사용자 센싱을 통한 입력장치인 MGlove (Multiple-sensing Clove)의 구현에 대해 기술한다. 본 입력장치는 버튼 없이 2축 가속 센서, 2축 자기 센서, 포토 다이오드의 세 가지 종류의 센서를 사용하여 사용자의 손동작을 통해 입력을 감지하고 RF 모듈을 이용하여 무선으로 통신 가능하다. 구현한 MGlove는 유비 쿼터스 센서 네트워크 환경을 위한 입력 장치로 context-aware input device로의 발전 가능성이 있으며, 센서 추적 기법을 통해 사용자의 자세, 위치, 방향에 관계없이 입력 가능하고 RF모듈을 통해 먼 거리에서도 조작이 가능한 특징을 가진다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.60-68
• /
• 2001

본 논문에서는 최근 초소형 기술로 각광받고 있는 MEMS(MicroElectroMechanical System) 기술을 이용한 무선통신 분야의 응용을 제고한다. RF ME- MS 기술은 기존의 기술들에 비해 크기나 전력소모, 삽입손실 등에서 우수한 고주파 특성을 갖는 소자 나 부품을 만들 수 있으며 특히 휴대용 단말기에 적 용 가능한 RE 부품들 즉 저손실 전송선로, 스위치, High Q inductor, 안테나 등의 주요 부품에 대한 연 구가 많이 이루어지고 있다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.424-428
• /
• 2000

In this paper, a MIC(Microwave Integrated Circuit) bandpass filter for wireless LAN(local area network) band is designed using hairpin resonators. The coupling between the hairpin resonators in the filter can be implemented with Y-Tpye coupling or X-Tpye coupling instead of conventional coupling in order to reduce the filter size. The filter with miniaturized hairpin resonator using parallel coupling is smaller in size by 50% more than that of a general hairpin filter