• 대한환경공학회지
• /
• 제35권3호
• /
• pp.206-212
• /
• 2013

입상활성탄 흡착공정에서의 PFCs 11종의 파과 순서는 PFODA가 가장 빨리 파과에 도달하였고, 다음으로 PFHDA, PFTeDA, PFTDA, PFDoDA, PFUnDA, PFDA, PFNA, PFOA, PFOS, PFHpA 순으로 나타났으며, PFCs의 사슬(chain) 길이가 길어질수록 빨리 파과에 도달하였다. 최대 흡착량(X/M)의 경우는 PFODA가 2.43 ${\mu}g/g$으로 가장 낮게 나타났으며, PFHpA가 64.50 ${\mu}g/g$으로 가장 높은 최대 흡착량을 나타내었고, PFOA와 PFOS의 경우는 각각 55.37 ${\mu}g/g$ 및 60.72 ${\mu}g/g$으로 나타났다. 또한, 활성탄 사용률(CUR)의 경우는 PFODA가 0.291 g/day로 나타나 PFHpA의 0.026 g/day 보다 11.2배 정도 높은 활성탄 사용률을 나타내었다. 석탄계 GAC 신탄을 이용한 입상활성탄 흡착공정에서 11종의 PFCs에 대해 최대 흡착량(X/M)과 분자량(사슬 길이)과의 상관성을 평가해 본 결과, $r^2$가 0.89로 나타나 양호한 상관성을 나타내었다.

• 한국미생물·생명공학회지
• /
• 제2권1호
• /
• pp.29-35
• /
• 1974

We have studied the applicability of the principles and inherent advantages of the two-stage dontinuous uclture technique to an enzyme process for the purpose of improving and optimizing the productivity of 3-ketosteroid-delta-1-dehydrogenase. By using a two-stage continuous culture system, the growth st ageand enzyme produdtion stage are separated. In each stage an optimal set of toperaing conditions was determined, and this was tested for feasibility for the period of 10 days. During this period, at least 70％ of the maximum enzyme productivity could be maintained. The important design parameters studied are: (1) optimal specific growth rate in the first stage which corresponds to the maximal cell productivity, (2) the optimal dilution rate in the second stage which in turn determines the size of second stage fermentor and the mean residence time of cells in the second stage, (3) cell concentration in both stages, add (4) the specific enzyme productivity and enzyme productivity of the second stage. In addition, by using two-stage continuous culture system we have been able to reduce or eliminate the effect of catabolite repression due to high medium concentration and the adverse effect of the solvent used to dissolve the inducer. We have found the balance between the opposing effects of induction and repression in the second stage judging from the observation that the enzyme productivity goes through a maximum.

• 생물정신의학
• /
• 제6권1호
• /
• pp.111-118
• /
• 1999

본 연구에서 저자들은 성인 정신분열병환자에서 손톱주름 총 시도와 정신분열병의 발생연령, 정신 병리, 진행성, 병전 기능, 인지기능과의 관련성을 알아보고자 DSM-IV의 진단기준에 맞는 정신분열병 환자 40명과 대조군 40명을 선택하여 연구한 결과 다음과 같은 결과를 보여주었다. 첫째, 정신분열병 대상군($6.2{\pm}5.9$)과 정상 대조군($5.2{\pm}6.0$) 간의 총 시도 점수(PVS)에서 통계적으로 유의한 차이가 없었고 (t=-0.67, p=0.252), 고도의 PVS 비율에서도 두 군간의 통계적인 차이가 없었다(${\chi}^2$=2.90, p=0.088). 둘째, PVS 많을수록 음성 증상을 제외한 PANSS의 모든 증상군에서 통계적으로 유의한 상관 관계를 보여주었다. 셋째, 발병연령이 빠를수록 PVS가 높았다(r=-0.291, p=0.034). 넷째, 병전적응이 안 좋을수록 PVS가 높았다(r=0.265, p=0.049). 다섯째, 정신분열병의 경과가 진행성일수록 신체미세기형이 많았다(r=-0.272, p=0.045). 여섯째, PVS와 CPT 정답률과는 역 상관관계(r=-0.375, p=0.009)를, CPT 개입 오류와는 상관관계(r=0.293, p=0.041)를 보여주었다. 본 연구의 소견에서, 손톱주름 총 시도가 정신분열병의 음성 증상과 관계된 일부 소견들에서만 연관이 있다는 것을 시사하고 있지만 이 연구는 적어도 어떤 형태의 정신분열병 환자들에 있어서 손톱주름 총 시도는 안 좋은 병전 적응력, 진행성 정신분열병과 같은 부분적으로 음성증상과 관련이 있는 임상 변인들 사이에 연관성을 보여 주었고, 이러한 소견은 정신분열병의 어떤 아형의 원인에 있어서 기질적인 영향이 있을 수 있다는 것을 암시한다.

• KSBB Journal
• /
• 제8권2호
• /
• pp.143-149
• /
• 1993

Activated carbons were used to examine their performance for the separation of undesirable colored materials from culture broth containing hyaluronic acid. Six local samples and a NORIT ROX 08 were tested, whereas the latter was mainly studied under batch and continuous modes. The optimal wavelength for the detection of colored materials was 330nm. The optimal choice of NORIT ROX 08 provided 30% colored residuals with 96% hyaluronic acid recovery of original broth in batch experiments. The nonlinear adsorption behavior of protein and colored materials with activated carbon (C) was correlated by a Langmuir equation to give 18C/24+C and 500C/892+C for protein and colored materials, respectively. It appears that colored materials were composed of 78% protein and 22% glucose residuals on the basis of clearance results. A microscopic study using a scanning electron microscope suggests that regeneration of used activated carbon with 0.1N NaOH and hot water was not satisfactory. The present study proposes that the continuous monitoring of colored materials during purification can be accomplished by Installation of a UV monitor commonly used for continuous detection of protein during the process, as resulted from the significant correlation of color (A330)=0.353protein(mg/ml)+0.1(R=99.7%).

• Journal of Radiation Protection and Research
• /
• 제44권2호
• /
• pp.64-71
• /
• 2019

Background: It is very difficult to distinguish between a radioactive contamination source and background radiation from natural radionuclides in the marine environment by means of online monitoring system. The objective of this study was to investigate a statistical process for triggering abnormal level of count rate data measured from our on-line seawater radioactivity monitoring. Materials and Methods: Count rate data sets in time series were collected from 9 monitoring posts. All of the count rate data were measured every 15 minutes from the region of interest (ROI) for $^{137}Cs$ ($E_{\gamma}=661.6keV$) on the gamma-ray energy spectrum. The Shewhart ($3{\sigma}$), CUSUM, and Bayesian S-R control chart methods were evaluated and the comparative analysis of determination methods for count rate data was carried out in terms of the false positive incidence rate. All statistical algorithms were developed using R Programming by the authors. Results and Discussion: The $3{\sigma}$, CUSUM, and S-R analyses resulted in the average false positive incidence rate of $0.164{\pm}0.047%$, $0.064{\pm}0.0367%$, and $0.030{\pm}0.018%$, respectively. The S-R method has a lower value than that of the $3{\sigma}$ and CUSUM method, because the Bayesian S-R method use the information to evaluate a posterior distribution, even though the CUSUM control chart accumulate information from recent data points. As the result of comparison between net count rate and gross count rate measured in time series all the year at a monitoring post using the $3{\sigma}$ control charts, the two methods resulted in the false positive incidence rate of 0.142% and 0.219%, respectively. Conclusion: Bayesian S-R and CUSUM control charts are better suited for on-line seawater radioactivity monitoring with an count rate data in time series than $3{\sigma}$ control chart. However, it requires a continuous increasing trend to differentiate between a false positive and actual radioactive contamination. For the determination of count rate, the net count method is better than the gross count method because of relatively a small variation in the data points.

• Carbon letters
• /
• 제5권4호
• /
• pp.159-163
• /
• 2004

The polymer-ceramic hybrid, known as 'ceramer', was synthesized by a sol-gel process by incorporating different amount of alkoxide as source of silicon in resorcinol-formaldehyde in presence of basic catalyst to get different percentage of silicon in ultimate carbonized composites. FTIR of the ceramer confirms that it is a network of Si-O-Si, Si-O-$CH_2$ and Si-OH type groups linked with benzene ring. Different amount of silicon in the ceramer exhibits varying temperature of thermal stability and lower coefficient of thermal expansion as compared to pure resorcinol-formaldehyde resin. The lower value of CTE in ceramer is due to existence of silica and resorcinol -formaldehyde in co-continuous phase. Unidirectional composites prepared with ceramer matrix and high-strength carbon fibers show lower value of flexural strength at polymer stage as compared to those prepared with resorcinol-formaldehyde resin. However, after heat treatment to $1450^{\circ}C$, the ceramer matrix composites show large improvement in the mechanical properties, i.e. with 7% silicon in the ceramer, the flexural strength is enhanced by 100% and flexural modulus value by 40% as compared to that of pure resorcinol-formaldehyde resin matrix composites.

• 한국의상디자인학회지
• /
• 제24권1호
• /
• pp.35-43
• /
• 2022

This study aims to analyze the physical properties of non-woven fabric sheets, which continue to grow in the cosmetic market. Non-woven fabric sheets were used as specimens, and a total of 17 samples were analyzed. To evaluate the physical properties of the non-woven fabric sheet, the weight, tensile strength, surface properties, free swell absorption, and wet stiffness were tested. Through the results itw was determined that non-woven fabric sheets for mask packs should be manufactured considering fiber arrangement so that the weight is 40 g/m², and the tensile strength should be maintained near 12 kgf. In addition, it was confirmed that the material selection and process conditions should be adjusted so that the free swell absorption is at least 8 g/g, and the wet stiffness is 200 mg. Therefore, since the non-woven fabrics for the mask sheets can be used in various products depending on fabric composition, this study will be expected to be basic data for the continuous growth of the sheet-type mask packs coming to market.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2001년도 추계학술대회 학술발표 논문집
• /
• pp.337-340
• /
• 2001

In this paper, we consider the observability conditions for the following nonlinear fuzzy neutral functional differential equations : (equation omitted), where x(t) is state function on E$\_$N/$\^$2/, u(t) is control function on E$\_$N/$\^$2/ and nonlinear continuous functions f:J C$\_$0/ E$\_$N/$\^$2/, k:J C$\_$0/ E$\_$N/$\^$2/ are satisfies global Lipschitz conditions.

• 한국물환경학회지
• /
• 제36권6호
• /
• pp.581-591
• /
• 2020

In this study, two types of reactors were operated to examine the properties of methanol uptake under the high-rate denitrification process. In a sequencing batch reactor, the denitrifying activity was enriched up to 0.80 g-N/g-VSS-day for 72 days. Then, the enriched denitrifying sludge was transferred to a completely stirred tank reactor (CSTR). At the final phase on Day 46-50, the nitrogen removal efficiency was around 100% and the total nitrogen removal rate reached 0.097±0.003 kg-N/㎥-day. During the continuous process, the sludge settling index (SVI30) was stabilized as 118.3 mL/g with the biomass concentration of 1,607 mg/L. The continuous denitrifying process was accelerated by using a sequencing batch reactor (SBR) with a total nitrogen removal rate of 0.403±0.029 kg-N/㎥-day with a high biomass concentration of 8,433 mg-VSS/L. Because the reactor was open to ambient air with the dissolved oxygen range of 0.2-0.5 mg-O2/L, an increased organic carbon requirement of 5.58±0.70 COD/NO3--N was shown for the SBR in comparison to the value of 4.13±0.94 for the test of the same biomass in a completely anaerobic batch reactor. The molecular analysis based on the 16S rRNA gene showed that Methyloversatilis discipulorum and Hyphomicrobium zavarzinii were the responsible denitrifiers with the sole organic carbon source of methanol.

• 청정기술
• /
• 제4권1호
• /
• pp.45-59
• /
• 1998

방선균인 Streptomyces kasugaensis에 의해서 생산되는 이차대사산물인 kasugamycin 생산성 증대 및 단위 생산량 당 오염물질 배출량 저감을 위한 연속 고정화 배양을 수행하였다. 세포 고정화에 적합한 포자 수확을 위한 포자형성 촉진 배지 개발은 물론 고정화 담체로 사용한 셀라이트에 수확된 포자를 고정화시키는 방법을 확립하였다. 연속 고정화 배양 시 고정화세포의 유출을 방지함으로써 안정된 연속배양을 가능토록 하기위한 decantor 형태의 고정화세포 분리기가 장착된 반응기를 사용하였다. 희석 속도 및 공급액 중의 기질 농도(당 농도, 인 농도)를 변화시키며 생합성된 kasugamycin 생산성 및 화학적산소요구량(COD)을 측정하였으며 이들을 현탁세포를 이용한 회분식 발효에서의 kasugamycin 생산성 및 발효 폐액 중의 COD 값과 비교하였다. 고정화 세포를 이용한 연속배양에서의 kasugamycin 생산성이 현탁세포를 이용한 회분식 발효에 비해 2.5배 높았으며, 동시에 단위 생산량 당 COD가 2.3배 저감되는 것으로 나타났다. 이것으로부터 연속 고정화 배양이 현탁 회분식 배양에 비해 kasugamycin 생산성 및 오염물질 배출 측면에서 유리한 청정 공정임을 확인할 수 있었다.