• Earthquakes and Structures
• /
• v.20 no.3
• /
• pp.279-293
• /
• 2021

Most of the existing seismic codes for RC buildings consider only a scenario earthquake for analysis, often characterized by the response spectrum at the specified location. However, any real earthquake event often involves occurrences of multiple earthquakes within a few hours or days, possessing similar or even higher energy than the first earthquake. This critically impairs the rehabilitation measures thereby resulting in the accumulation of structural damages for subsequent earthquakes after the first earthquake. Also, the existing seismic provisions account for the non-linear response of an RC building frame implicitly by specifying a constant response modification factor (R) in a linear elastic design. However, the 'R' specified does not address the changes in structural configurations of RC moment-resisting frames (RC MRFs) viz., building height, number of bays present, bay width, irregularities arising out of mass and stiffness changes, etc. resulting in changed dynamic characteristics of the structural system. Hence, there is an imperative need to assess the seismic performance under sequential earthquake ground motions, considering the adequacy of code-specified 'R' in the representation of dynamic characteristics of RC buildings. Therefore, the present research is focused on the evaluation of the non-linear response of medium-rise 3D RC MRFs with and without vertical irregularities under bi-directional sequential earthquake ground motions using non-linear dynamic analysis. It is evident from the results that collapse probability increases, and 'R' reduces significantly for various RC MRFs subjected to sequential earthquakes, pronouncing the vulnerability and inadequacy of estimation of design base shear by code-specified 'R' under sequential earthquakes.

• Journal of the Korean Institute of Gas
• /
• v.22 no.3
• /
• pp.45-52
• /
• 2018

As guidelines for exhaust gases of ship are reinforced by the International Maritime Organization, the necessity for LNG fuelled ship is emerging. The relevant research is actively progressing to develop technologies and promote commercialization. When the residual quantity of LNG fuel tank is less than 70% by consuming fuel during operation, sloshing should be considered. We applied the Type C LNG fuel tank because medium sized LNG fuelled ships are difficult to equip with re-liquefaction system. Structural integrity and thermal performance are very important, especially in LNG fuel tanks that apply to LNG fuelled ship. Through this study, we proposed evaluation procedure of thermal performance for the Type C LNG tank, and verified the validity and effectiveness of BOR(Boil-Off Rate) test Procedure by comparing and analyzing changes in temperature, pressure, BOG(Boil-Off Gas).

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.104-110
• /
• 2017

When evaluating effectiveness of a R&D program, there is a tendency to simply compare the performances of the beneficiaries before and after the program or to compare the differences in the performances of the beneficiaries and the non-beneficiaries before-after the program. However, these ways of evaluating effectiveness of a program have some problems because they can not differentiate between complement effect, which facilitates corporate R&D investment, and substitute effect, which, literally, substitutes corporate R&D investment. Therefore, these problems could bring about wrong policies concerning R&D programs. In this paper, a new approach using path analysis is suggested as a means to overcome these problems and it is utilized, as an application, to evaluate the effectiveness of Plant Engineering Program conducted by Ministry of Trade, Industry & Energy, Korea. First, the direct impact of government R&D investment on corporate R&D investment is analyzed, through which it is identified which of crowding-in effect (complement effect) and crowding-out effect (substitute effect) is dominant. Next, the direct effect of government R&D investment on corporate performance and the direct effect of corporate R&D investment on corporate performance is analyzed respectively. Finally, by combining the two previous analysis, the total effect of government R&D investment on corporate performance is identified. As a result, it turns out that, in Plant Engineering Program, crowding-in effect is more dominant than crowding-out effect and that Plant Engineering Program has definitely positive effect on the beneficiary in terms of corporate performance indirectly and directly.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.1
• /
• pp.175-182
• /
• 2009

The effort for GSI based IT system consolidation has been continued due to the increase of the system and complication increase of system connection, mainly by the global company. Since successful example of GSI realization by part of developed company affect to Korea, global level IT system consolidation has been examined mainly by the domestic company that have great deal of overseas business. Although they have examined consolidation possibility mainly on R&D, finance, operation management part which is the base part of company management, there are limitation for consolidation realization because of the difference between regional business problem of huge cost needed for consolidation. To overcome these realization limitations, it is necessary to lead risk and cost reduction through stepwise part unity and decide Priority Evaluation Framework for Consolidation target and systematic consolidation strategy. For GSI realization, appropriate distributions of unification time according to target system are needed. In this study, based on easiness and usefulness of consolidation and connection between the targets, evaluation methodology for Priority Evaluation Framework of system consolidation has been developed. Priority Evaluation Framework has been decided by applying developed methodology to global production company of high tech industrial part. Through this methodology, companies can realize successful and stable GSI by investing global resources intensively by Priority Evaluation Framework of consolidation target system.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.2
• /
• pp.47-56
• /
• 2019

Although the weapon systems are becoming more diverse and complex, they are progressing in a short development period and a longer test and evaluation period. The more difficult the given environment is, the more efforts and performance of quantitative target values can be made by development agencies to carry out stable projects. However, these target values of the Integrated Logistics Support are not specified in the requirements and being set during the system development phase. In this paper, application of MOEs, MOPs and TPMs for ILS are presented and provided the basis for carrying out systematic Verification & Validation activities. As a result that MOEs of the ILS were chosen as Availability and MOPs as Mission Reliability, Logistics Reliability, Maintainability and Supportability and TPMs as MTBF, MTBCF, MTTR and so on. In particular, it is appropriate tailoring and apply the TPMs considering the cost, schedule, scope of work and characteristics of the project.

• Korea Journal of Cosmetic Science
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2019

The identification of compounds with anti-senescence activity in cell culture system is a first step in aging research. Given that pyruvate can be used energy source by conversion to acetyl-CoA in mitochondria, and protects cultured cell from various stress-induced cell damage and cell death, synthetic media (e.g., DMEM) often includes 1 mM pyruvate, which is very higher than the pyruvate concentration in human blood (approximately 30 ��M). However, the use of medium containing high concentration of pyruvate is not suitable for screening anti-senescence compounds, because pyruvate also protects against the cellular senescence of primary human dermal fibroblasts (NHDFs) through NAD+ generated during conversion to lactate. In this study, four extracts, i.e., Sprouted seed and fruit complex, Poncirus trifoliata fruit extract, Jaum balancing complex, and Prunus mume extract were used for evaluation of different anti-senescence effect in the absence or presence of 0.1 mM pyruvate, similar to the physiological pyruvate concentration. The senescence in NHDFs cultured with DMEM in the presence of 0.1 mM pyruvate (approximately the physiological concentration in human blood) is accelerated, as observed in pyruvate deprivation conditions. The cytotoxicity of the Poncirus trifoliata fruit extract was protected by pyruvate, and Jaum balancing complex and Prunus mume extract had anti-senescence activity in the presence of 0.1 mM pyruvate, but not in the absence of pyruvate. Given that pyruvate is a powerful protector against both cytotoxicity and cellular senescence, the screening of candidate agents for anti-senescence in high pyruvate conditions using an in vitro cell culture system is not valid. Therefore, we recommend the use of a low concentration of pyruvate to evaluate the anti-senescence effects of candidates, which is more similar to in vivo aging conditions than excessive stress-induced senescence models, to exclude the effect of excessive pyruvate in vitro.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.4 s.34
• /
• pp.123-131
• /
• 1999

Liquid crystal known as a rheological barrier to coalescence of oil droplets, increases emulsion stability, water-holding capacity and promotes active material penetration to skin. Some investigation for its rheological characteristics have been reported but its relations to consumer perception have been rarely published. In this study, oil/water emulsion and oil/liquid crystal/water systems were manufactured using the same composition or Behenyltrimethylammonium chloride/Cetostearyl alcohol/Lanolin oil. and rheological properties or each system were investigated with Cone and Plate rheometer. The formation of liquid crystalline phase was observed with polarized microscope and Differential Scanning Calorimeter. Continuous shear experiment, creep, yield and water holding capacity were measured for oil/water and oil/liquid crystal/water systems. The results were compared with sensory evaluations. Oil/liquid crystal/water system showed higher,viscosity at the same shear rate. higher viscoelasticity and higher yield stress than oil/water system. These properties were expected to show good spreadability and excellent richness without waxiness in hair can: products of creme type. This expectation was consistent with the results of sensory experiments. Water-holding capacity was evaluated by measuring residual water of specimens at specific temperature and relative humidity. Oil/liquid crystal/water system was proved to have higher ability to hold water in comparison with oil/water system. The results indicated that oil/liquid crystal/water system was of benefit to rheological properties creme type hair care products.

• Proceedings of the SCSK Conference
• /
• 1999.10a
• /
• pp.123-131
• /
• 1999

Liquid crystal known as a rheological barrier to coaleseence of oil dorplets. increases. emulsion stability, water-holding capacity and promotes active material penetration to skin. Some investigation for its rheological characteristics have been reported but its relations to consumer perception have been rarely published. In this study oil/water emulsion and oil/liquid crystal/water systems were manufactured using the same composition of Behenyltrimethylammonium chloride/Cetostearyl alcohol/Lanolin oil. and rheological properties of each system were investigated with Cone and Plate rheometer. The formation of liquid crystalline phase was observed with polarized microscope and Differential Scanning Calorimeter. Continuous shear experiment, creep yield and water holding capacity were measured for oil/water and oil/liquid crystal/water systems. The results were compared with sensory evaluations. Oil/liquid crystal/water system showed higher viscosity at the same shear rate, higher viscoelasticity and higher yield stress than oil/water system. These properties were expected to show good spreadability and excellent richness without waxiness I hair care products of creme type. This expectation was consistent with the results of sensory experiments. Water-holding capacity was evaluated by measuring residual water of specimens at specific temperature and relative humidity, Oil/liquid crystal/water system was proved to have ability to hold water in comparison with oil/water system. The results indicated that oil/liquid crystal/water system was of benefit to rheological properties creme type hair care products.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.20 no.1
• /
• pp.85-99
• /
• 1995

Increasingly, risk analysis is becoming important ingredients in achieving the successful implementation and application in the area of the project management. The project management system is designed to manage or control the project resources on a given activity within time, cost and performance so called TPPM (Total Productive Project Management). In this research, a risk analysis model misproposed to identify potential problem areas, quantify the risks, and generated the chice of the action that can be taken to reduce the risk. In addition two analysis models are proposed : 1) risk factor model and 2) network simulation model using VERT (Venture Evaluation and Review Technique ). The objective of the remodels is to estimate the schedule, cost performance risks. These proposed quantitative models for project risk analysis are proving its value for the project managers who need to assess the risk of changes in cost, schedule, or performance. The proposed models will be used in the area of project selection, evaluation and the allocation of project resources.

• Journal of Information Technology Applications and Management
• /
• v.22 no.1
• /
• pp.1-15
• /
• 2015

Software is not only control and operational technology of computer, various system, and machines, but also knowledge handling and service technology for production, storage, and utilization of digital information. Many nations invest enormous budget in SW R&D to acquire core and original technology, and commercialize. To select and concentrate on SW R&D investment by segmenting diverse functions and element technologies consisting of sw technology, introduction of evaluation and analysis methodology on technology level utilizing reliable patent and bibliometrics is demanded these days. The purpose of this paper is to suggest some analysis frameworks of national technology level in the field of sw technology. Another practical purpose is to verify sw technology policy using qualitative and quantative indicators of patent and bibliometrics.