• Journal of The Korean Association For Science Education
• /
• v.32 no.1
• /
• pp.95-112
• /
• 2012

The research evaluated the effects of the improvements in scientific inquiry for elementary school students and focused on the development and application of the explicit and reflective learning strategy through observation and classification. The explicit and reflective learning strategy was modified and completed with the review of the experts after the development of the draft based on the theoretical approach. The students were evaluated for their academic achievements in scientific inquiry skills before and after taking the course. The results were as follows: First, the steps of the developed learning strategy (1) to motivate, (2) to explore reflectively, (3) to guide explicitly, (4) to inquire explicitly, and (5) to verify reflectively were set to reflect the verification. Second, the results of applying the developed model to the lessons based on the quantitative analysis was effective for observation and classification skills in the quest for improved performance of the whole (the sum of observation and classification, inquiry skills) and the observed features, but there was no effect on classification. Also, the lessons applied the developed teaching strategy and showed effectiveness in improving academic achievement. Particularly in analyzing the relationship between the academic achievement and exploration capabilities, in order to improve academic achievement, the importance of improving inquiry skills was found. Third, the qualitative analysis of teaching and learning strategy developed by applying the lessons of this teacher guide and small group activities through the explicit and reflective observation and classification of the student learning activities showed the significant improvement of ability of the scientific inquiry skills. In addition to the improvement in the abilities of the classification showed after the formation of the most basic observation skills of the scientific inquiry.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.4
• /
• pp.223-231
• /
• 2012

The purpose of this study is to investigate basically the mechanism of heat transfer by the resolution of complex fluid flow inside a sophisticated designed screw dryer for the treatment of sewage sludge by using numerical analysis and experimental study. By doing this, the result was quite helpful to obtain the design criteria for enhancing drying efficiency, thereby achieving the optimal design of a multiple screw type dryer for treating inorganic and organic sludge wastes. One notable design feature of the dryer was to bypass a certain of fraction of the hot combustion gases into the bottom of the screw cylinder, by the fluid flow induction, across the delicately designed holes on the screw surface to agitate internally the sticky sludges. This offers many benefits not only in the enhancement of thermal efficiency even for the high viscosity material but also greater flexibility in the application of system design and operation. However, one careful precaution was made in operation in that when distributing the hot flue gas over the lump of sludge for internal agitation not to make any pore blocking and to avoid too much pressure drop caused by inertial resistance across the lump of sludge. The optimal retention time for rotating the screw at 1 rpm in order to treat 200 kg/hr of sewage sludge was determined empirically about 100 minutes. The corresponding optimal heat source was found to be 150,000 kcal/hr. A series of numerical calculation is performed to resolve flow characteristics in order to assist in the system design as function of important system and operational variables. The numerical calculation is successfully evaluated against experimental temperature profile and flow field characteristics. In general, the calculation results are physically reasonable and consistent in parametric study. In further studies, more quantitative data analyses such as pressure drop across the type and loading of drying sludge will be made for the system evaluation in experiment and calculation.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.1
• /
• pp.63-75
• /
• 2012

This paper gives some basic requirements and preferences of various geological environmental conditions for the final deep geological repository of spent nuclear fuel (SNF). This study also indicates how the requirements and preferences are to be considered prior to the selection of sites for a site investigation as well as the final disposal in Korea. The results of the study are based on the knowledge and experience from the IAEA and NEA/OECD as well as the advanced countries in SNF disposal project. This study discusses and suggests preliminary guideline of the disposal requirements including geological, mechanical, thermal, hydrogeological, chemical and transport properties of host rock with long term geological stabilities which influence the functions of a multi-barrier disposal system. To apply and determine whether requirements and preferences for a given parameter are satisfied at different stages during a site selection and suitability assessment of a final disposal site, the quantitative criteria in each area should be formulated with credibility through relevant research and development efforts for the deep geological environment during the site screening and selection processes as well as specific studies such as productions of safety cases and validation studies using a generic underground research laboratory (URL) in Korea.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.235-246
• /
• 2018

Paeony has pharmacological activities such as anti-inflammatory, anti-allergic, anti-bacterial, central inhibitory, gastric secretion inhibition, and antispasmodic activities. In addition, its antioxidant activity and whitening effect being reported, thus it is being explored as raw materials for cosmetics. We compared the changes in the contents of paeoniflorin and paeonol in Peony extracts, depending on the changes of extracting solvents, temperature and time. The HPLC method was set up for simultaneous analysis, the system suitabilities were confirmed by using the calibration curves and the QC samples for each assay batch. Paeonol was detected only in roots, and paeoniflorin was higher in leaf and flower than root. Higher concentrations of both ingredients were extracted when the root was used after grinding to a suitable size, and when 30% 1,3-butylene glycol was used as the extraction solvent. Also the concentrations tended to increase at higher temperature and longer time, but the increase was gradual at over $75^{\circ}C$ and 4 hours. The ratio of root, leaf and flower was determined to be 2+2+1g/0.5kg of batch, reaching the contents criteria of paeoniflorin and paeonol. Finally, we selected as the best extraction condition when the raw materials are mixed with 2+2+1g/0.5kg and extracted with 30% 1,3-butylene glycol as an extraction solvent at $75^{\circ}C$ for 4 hours, considering both the concentrations of two components and the cost of raw materials and manufacturing process, The extraction units were scaled up to 10 kg under this condition.

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.2
• /
• pp.91-97
• /
• 2007

Purpose: To evaluate the feasibility of a commercial ion chamber array for intensity modulated radiation therapy (IMRT) quality assurance (QA) was performed IMRT patient-specific QA Materials and Methods: A use of IMRT patient-specific QA was examined for nasopharyngeal patient by using 6MV photon beams. The MatriXX (Wellhofer Dosimetrie, Germany) was used for IMRT QA. The case of nasopharyngeal cancer was performed inverse treatment planning. A hybrid dose distribution made on the CT data of MatriXX and solid phantom all of the same gantry angle (0$^\circ$). The measurement was acquired with geometrical condition that equal to hybrid treatment planning. The $\gamma$-index (dose difference 3%, DTA 3 mm) histogram was used for quantitative analysis of dose discrepancies. An absolute dose was compared at the high dose low gradient region. Results: The dose distribution was shown a good agreement by gamma evaluation. A proportion of acceptance criteria was 95.8%, 97.52%, 96.28%, 98.20%, 97.78%, 96.64% and 92.70% for gantry angles were 0$^\circ$, 55$^\circ$, 110$^\circ$, 140$^\circ$, 220$^\circ$, 250$^\circ$ and 305$^\circ$, respectively. The absolute dose in high dose low gradient region was shown reasonable agreement with the RTP calculation within $\pm$3%. Conclusion: The MatriXX offers the dosimetric characteristics required for performing both relative and absolute measurements. If MatriXX use in the clinic, it could be simplified and reduced the IMRT patient-specific QA workload. Therefore, the MatriXX is evaluated as a reliable and convenient dosimeter for IMRT patient-specific QA.

• Journal of The Korean Association For Science Education
• /
• v.37 no.6
• /
• pp.921-935
• /
• 2017

The purpose of this research is to investigate trends of science educational researches on underrepresented students by scrutinizing Korean science education research literatures. For this particular purpose, literatures on underrepresented students were extracted from both listed and candidate journals for KCI and theses from 1984 to February 2017, and analyzed criteria such as source, year of publication, design, method, and content of research. A total of 125 papers from journals and 147 theses were extracted. In these researches, 61%, 20%, 6% were about students with disability, underachievers, and North Korean defector students respectively. The ratio of the researches on other underrepresented students such as multicultural, low income families, students who are from rural areas, and other underrepresented students were less than 5%. According to the year of publication, it was found that the number of research papers on underrepresented students increased continuously by a single digit from 1984 by focusing on the students with disability and underachievers. After that, from around 2008, it showed a rapid increase and researches on underrepresented students carried out more than 20 times annually. With regards to research design, there were 58% quantitative, 28% qualitative and 14% hybrid research design. Through analysis of research methods, we found that 30% of experimental research, 22% of interpretive research, 20% of correlation analysis, and 14% of survey research. After going through the characteristics of the research contents by visualizing the relationship between the research groups and the keywords that were extracted, it was found that even though the science education researches on underrepresented students have various contents, there were no keywords that were researched continuously and intensively in this area. The structural relationship between the keywords and each research group on underrepresented students showed that 'academic achievement' is the keyword with the highest degree of mediateness and connectedness.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.152-157
• /
• 2008

The customer satisfaction of WAP service greatly relies on the usability of the service due to the limited display size of a mobile phone and limitation in realizing UI (User Interface) for function keys, browser, and OS (operating system) Currently, a number of contents providers develop and deliver varying services, and thus, it is critical to control quality level of UI in consistent standards and manner. This study suggests usability index evaluation system to achieve consistent UI quality control of various WAP services. The system adopts both top-down and bottom-up approaches. The former concerns deriving UI design components and evaluation checklists for the WAP, based on the usability attributes and UI principles. The latter concerns deriving usability-related evaluation checklists from the established UI design features, and then grouping them from the viewpoint of usability principles and attributes. This bidirectional approach has two outstanding advantages: it allows thorough examination of potential elements that can cause usability problems from the standpoint of usability attributes, and also derives specific evaluation elements from the perspective of UI design components that are relevant to the real service environment. The evaluation system constitutes a hierarchical structure by networking usability attributes, UI guideline which indicates usability principles for each attribute, and usability evaluation checklist for each UI component that enables specific evaluation. Especially, each evaluation checklist contains concrete contents and format so that it can be readily marked in O/X. The score is based on the ratio of number of items that received positive answer to the number of total items. This enables a quantitative evaluation of the usability of mobile WAP service. The validity of the proposed evaluation system has been proved through comparative analysis with the real usability problems based on the user test. A software was developed that provides guideline for evaluation objects, criteria and examples for each checklist, and automatically calculates a score. The software was applied to evaluating and improving the real mobile WAP service.

• Food Science and Preservation
• /
• v.13 no.4
• /
• pp.432-437
• /
• 2006

To compare the content of natural existence with artificial addition experimental subject of 152 cases(25 kinds) were classified by two category of 42 fresh samples(14 kinds) and 110 processed samples(23 kinds). The content of sulfur dioxide were determined by Monnier-Williams's modified method. In mean content of 42 non-processed samples studied the range of contents was between 0.00 and 9.46 mg/kg. Radish contained the highest amount of sulfur dioxide(8.97 mg/kg), followed by onion(8.04 mg/kg). In mean content of 110 processed samples studied, the range of content was between 0.00 and 1,828.59 mg/kg. Gourd contained the highest amount of sulfur dioxide(1,064.61 mg/kg), followed by apricot(869.62 mg/kg), dried persimmon(64.11 mg/kg), dried radish(29.00 mg/kg), dried pumpkin(17.63 mg/kg), and those were lowe. than criteria. To supply safe food for the citizens, the quantitative level is required to be reinforced to supply safe foot continuously.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.277-282
• /
• 2010

The study is to verify non-uniform dose distribution in Field-In-Field (FIF) technique using two-dimensional ionization chamber (MatriXX, Wellhofer Dosimetrie, Germany) for breast tangential irradiation. The MatriXX and an inverse planning system (Eclipse, ver 6.5, Varian, Palo Alto, USA) were used. Hybrid plans were made from the original twenty patients plans. To verify the non-uniform dose distribution in FIF technique, each portal prescribed doses (90 cGy) was delivered to the MatriXX. The measured doses on the MatriXX were compared to the planned doses. The quantitative analyses were done with a commercial analyzing tool (OmniPro IMRT, ver. 1.4, Wellhofer Dosimetrie, Germany). The delivered doses at the normalization points were different to average 1.6% between the calculated and the measured. In analysis of line profiles, there were some differences of 1.3-5.5% (Avg: 2.4%), 0.9-3.9% (Avg: 2.5%) in longitudinal and transverse planes respectively. For the gamma index (criteria: 3 mm, 3%) analyses, there were shown that 90.23-99.69% (avg: 95.11%, std: 2.81) for acceptable range ($\gamma$-index $\geq$ 1) through the twenty patients cases. In conclusion, through our study, we have confirmed the availability of the FIF technique by comparing the calculated with the measured using MatriXX. In the future, various clinical applications of the FIF techniques would be good trials for better treatment results.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.105-110
• /
• 2010

Purpose: Three phase bone scan was considered sensitive in Patients with Reflex Symphathetic Dystrophy Syndrome (RSDS). Generally, three phase bone scan in the RSDS patients shows increased uptake of one side extremity joint. But three phase bone scan has been performed with flow, blood pool and delayed scan. We performed blood pool half body scan in order to investigate its usefulness. Materials and Methods: From October 2007 to September 2009, three phase bone scan (flow, blood pool, half body blood pool, delayed) was performed after injection of 750 MBq of $^{99m}Tc$-DPD in diagnosed patients with RSDS (M:F=8:7, R:L=9:6). For quantitative analysis, we obtained the count ratios of bilateral hands by drawing a region of interest (ROI) in the three phase images and compared with the count ratios of shoulders in half body blood pool and delayed images. Results: In flow images, right/left ratios were $1.09{\pm}0.53$. In blood pool images, right/left ratios were $1.13{\pm}0.47$ (hand), $1.08{\pm}0.26$ (shoulder). In delayed images, right/left ratios were $1.24{\pm}0.75$ (hand), $1.11{\pm}0.31$ (shoulder). As a result, Log of right/left counts of the others and that of shoulder blood pool image were correlated well with statistical significance (Spearman's R, p<0.005 SPSS for windows ver.12.0). Conclusion: Half body blood pool scan may be helpful in the diagnosis of patients with RSDS. Moreover, Half body blood pool scan reduced false negative and false positive rates. In order to improve agreement on interpretation of RSDS, Blood pool half body scan should be established as common criteria.