• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.48-54
• /
• 2004

플라즈마 디스플레이 패널의 구동실험을 용이하게 할 수 있는 구동실험장치를 개발하였다. 이 장치는 펄스의 타이밍을 컴퓨터상에서 설계하고 시뮬레이션 할 수 있고 이렇게 설계된 타이밍을 사용하여 PLD에 프로그래밍하고 고전압 FET 스위치들을 제어할 수 있다. 이 장치는 기존의 로직 gate IC를 이용하여 하드웨어적으로 스위칭 로직을 구현하는 것 보다 펄스로직의 설계시간을 단축시킬 수 있으며 구동방식의 변경에 따른 펄스의 타이밍 변경도 용이하다. 이 구동장치를 가지고 상용화 되어있는 ADS 구동방식을 구현하여 3전극 AC PDP의 계조구현 실험을 하였다.

• Steel and Composite Structures
• /
• 제32권1호
• /
• pp.91-110
• /
• 2019

In the present study, the effects of six different ground motion scaling methods on inelastic response of nonlinear steel moment frames (SMFs) are studied. The frames were designed using energy-based PBPD approach with the design concept using pre-selected target drift and yield mechanism as performance limit state. Two target spectrums are considered: maximum credible earthquake spectrum (MCE) and design response spectrum (DRS). In order to investigate the effects of ground motion scaling methods on the response of the structures, totally 3216 nonlinear models including three frames with 4, 8 and 16 stories are designed using PBPD approach and then they are subjected to ensembles of ground motions including 42 far-fault and 90 near-fault pulse-type records which were scaled using the six different scaling methods in accordance to the two aforementioned target spectrums. The distributions of maximum inter-story drift over the height of the structures are computed and compared. Finally, the efficiency and reliability of each ground motion scaling method to estimate the maximum nonlinear inter-story drift of special steel moment frames designed by energy-based PBPD approach are statistically investigated, and the most suitable scaling methods with the lowest dispersion for two groups of earthquake ground motions are introduced.

• Advances in nano research
• /
• 제12권6호
• /
• pp.583-592
• /
• 2022

In this paper, a pulsed picosecond laser dressing method for bronze-bonded diamond wheel is studied systematically and comprehensively. The picosecond laser pulse ablation experiment is carried out, and the ablation thresholds of bronze-bonded and diamond abrasive particle are measured respectively. The results indicate that the single-pulse ablation thresholds of bronze-bonded are 0.89J/cm², 0.24J/cm² during strong/weak ablation stages. And the multi-pulse ablation thresholds of diamond abrasive particle are 1.69J/cm², 0.49J/cm² during strong/weak ablation stages. Obviously, diamond grains have less thermal damage during the process of gentle ablation. The diamond grains of the grinding wheel surface are graphitized during laser dressing. The bronze-bonded is relatively smooth and organizational stability, and the diamond grits have suitable prominent height, which are beneficial to maintain the good grinding performance of dressed bronze-bonded diamond grinding wheels.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.187-190
• /
• 2009

다중펄스 로켓모타 기술은 일회성 추력발생 방식을 다회성으로 펄스화하여 로켓모타의 보유 에너지를 효율적으로 배분함으로서 유도탄의 사거리 증가와 종말속도를 향상시키므로 기동성과 명중률을 크게 향상시킬 수 있는 첨단기술이다. 본 연구에서는 다중펄스 로켓모타에 적용되는 격벽형 펄스분리장치를 설계하고, 그 시제품을 개발하였다. 펄스 분리장치의 핵심 부품인 격벽과 파열판에 대한 탄소성 구조 해석을 수행하였다. 제작된 시제품에 대한 구조적 안정성을 확인하기 위한 공압 시험을 실시하였다. 시험 결과를 해석과 비교 분석하였으며, 비교적 일치함을 확인 할 수 있었다.

• International Journal of Control, Automation, and Systems
• /
• 제5권5호
• /
• pp.508-514
• /
• 2007

Properties and potential applications of the block pulse response circulant matrix (PRCM) and its singular value decomposition (SVD) are investigated in relation to MIMO control and identification. The SVD of the PRCM is found to provide complete directional as well as frequency decomposition of a MIMO system in a real matrix form. Three examples were considered: design of MIMO FIR controller, design of robust reduced-order model predictive controller, and input design for MIMO identification. The examples manifested the effectiveness and usefulness of the PRCM in the design of MIMO control and identification. irculant matrix, SVD, MIMO control, identification.

• Journal of Communications and Networks
• /
• 제10권4호
• /
• pp.451-454
• /
• 2008

Ultra-wideband (UWB) radios have attracted great interest for their potential application in short-range high-data-rate wireless communications. High received signal to noise ratio and compliance with the Federal Communications Commissions (FCC) spectral mask call for judicious design of UWB pulse shapers. In this paper, even and odd order derivatives of Gaussian pulse are used respectively as base waveforms to produce two synthesized pulses. Our method can realize high efficiency of spectral utilization in terms of normalized effective signal power (NESP). The waveform design problem can be converted into linear programming problem, which can be efficiently solved. The waveform based on even order derivatives is orthogonal to the one based on odd order derivatives.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.533-535
• /
• 2007

The design of tunned filters for six-pulse thyrister converter is discussed. For electrolyzer system, the design procedure of tunned filters of AC 14.4kV power system are proposed by dynamic simulation. It is shown that these harmonic filters can meet most operational requirments. By careful specification of the transformer reactance, very low harmonic content and high power factor may be achieved at a specific operating point. The the proposed design procedure is verified with the simulation results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.132-135
• /
• 2001

The design of square pulse generators using pulse forming lines (PFLs) made up of identical L and C, was reviewed in this study. 14 different types of PFLs were analyzed utilizing PSpice simulation results. These PFLs were characterized with respect to their distinct features: the number of forming lines (single or double), the circuit relationship between PFL and load (parallel or series), the types of energy storage (voltage source, current source or a combination of both). The characteristic impedances, output parameters such as pulse width, voltage and current magnitudes, and powers were derived for each scheme. The merits and demerits of the output parameters were also included.

• 한국전자파학회논문지
• /
• 제14권2호
• /
• pp.139-147
• /
• 2003

본 논문에서는 FCC에서 제정한 허용 주파수 대역 내에서 100 Mbps급 M-ary PPM/TH UWB 시스템 설계를 위한 특성 파라미터의 규격을 제안하고, AWGN 채널에서 제안된 시스템의 성능을 분석하였다. 성능 분석 결과, 이 시스템에 적용 가능한 펄스 주기는 매우 한정적이며, 시스템의 데이터 전송률을 일정하게 할 경우, M과 펄스반복 개수가 증가할수록 시스템 성능은 개선되고, 사용자 수는 감소됨을 관측하였다.

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.51-56
• /
• 2014

The flat power spectrum of the transmitter output signal for the desired frequency range is ideal to achieve the best performance of ultrashort pulse reflectometry. However, the power spectrum of a typical pulse generator decreases significantly as frequency increases. A configuration of three chirped waveforms was employed to improve the power spectrum of the transmitter signal at higher frequencies. To determine the amplification gain required for higher frequency components, three chirped waveforms were theoretically generated and their power spectra were measured using numerical band-pass filters. Based on the results of numerical computations, the three chirp configuration was successfully applied to the design of the transmitter for a broadband system.